On Sun, 30 Aug 2009 12:43:28 -0700 (PDT)
Adil Adil <adil.drissi@xxxxxxxxx> wrote:
> Hi,
>
> Unfortunately it still does not work. Bellow you'll find the content
> o my alsa-info.txt after the updates. If there are some additional
> tests that you want me to do please let me know: ------------
The IEC958 is still on. This is definitely from after the amixer
command was run? Were there errors when running the command? Or
warnings?
> Simple mixer control 'IEC958',0
> Capabilities: pswitch pswitch-joined
> Playback channels: Mono
> Mono: Playback [on]
> control.33 {
> comment.access 'read write'
> comment.type BOOLEAN
> comment.count 1
> iface MIXER
> name 'IEC958 Playback Switch'
> value true
> }
Below are the errors saying that the analog part of your card was not
active. i.e. why you have no sound
> !!ALSA/HDA dmesg
> !!------------------
>
> firewire_core: created device fw0: GUID 00e01800034c8845, S400
> ALSA sound/pci/ac97/ac97_codec.c:2122: AC'97 0 analog subsections not
> ready intel8x0_measure_ac97_clock: measured 50452 usecs
> --
> Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ
> 18 ALSA sound/pci/ac97/ac97_codec.c:2154: MC'97 1 converters and GPIO
> not ready (0xff00) device-mapper: multipath: version 1.0.5 loaded
>
Please do the following:
Run
amixer -c 0 cset iface=MIXER,name='IEC958 Playback Switch',value=false
If there are no errors, check immediately after whether the above values
have changed in the output of alsa-info.txt. If they have, you should
have sound.
If there are errors, please post them.
This is an alternate way of trying to change the control value.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
