Re: Hp Photosmart - scanner not detected.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



--- On Sun, 7/6/08, Patrick O'Callaghan <pocallaghan@xxxxxxxxx> wrote:

> From: Patrick O'Callaghan <pocallaghan@xxxxxxxxx>
> Subject: Re: Hp Photosmart  - scanner not detected.
> To: fedora-list@xxxxxxxxxx
> Date: Sunday, July 6, 2008, 10:22 PM
> On Sun, 2008-07-06 at 21:47 -0700, Mick M. wrote:
> > Hi;
> >  I have an HP Photosmart C5180 all in one
> printer/scanner.
> > 
> > It worked fine in F8 both as a printer and scanner.
> > Now here I am a bit fuzzy.
> > I *Think* it worked ok in F9, I don't scan much.
> > 
> > Now it prints but is not detected as a scanner.
> > This is a USB device.
> > I uncommented the two lines in /etc/sane.d/hp.conf
> > 
> > # Uncomment the following if your scanner is connected
> by USB,
> > # but you are not using libusb
> >  /dev/usb/scanner0
> >   option connect-device
> > 
> > There in no /dev/scanner
> > I can't figure out how to usw /sbin/MAKEDEV to
> make one.
> > 
> > This is a fully updated F9 KDE box.
> > 
> > [root@localhost ~]# uname -r
> > 2.6.25.9-76.fc9.i686
> > 
> > [root@localhost ~]# rpm -qa *sane*
> > sane-backends-devel-1.0.19-10.fc9.i386
> > sane-frontends-1.0.14-4.fc9.i386
> > sane-backends-libs-1.0.19-10.fc9.i386
> > sane-backends-1.0.19-10.fc9.i386
> > xsane-gimp-0.995-3.fc9.i386
> > sane-backends-libs-gphoto2-1.0.19-10.fc9.i386
> > xsane-0.995-3.fc9.i386
> 
> # yum install hplip
> # hp-setup
> 
> I have the exact same printer/scanner and it works
> perfectly on F9 using
> the hplip tools. The only difference is I have it connected
> to my local
> LAN via its builtin Ethernet port, and for some reason on
> setup I had to
> supply its IP address as it wasn't detected
> automatically, but from then
> on it's been trouble-free.
> 
> For what it's worth:
> 
> # rpm -qa \*sane\*
> libsane-hpaio-2.8.2-2.fc9.x86_64
> sane-backends-libs-1.0.19-10.fc9.x86_64
> sane-backends-libs-1.0.19-10.fc9.i386
> xsane-0.995-3.fc9.x86_64
> sane-backends-1.0.19-10.fc9.x86_64
> xsane-gimp-0.995-3.fc9.x86_64
> #
> 
> poc
>
root@localhost ~]# yum install hplip
Package hplip-2.8.2-2.fc9.i386 already installed and latest version
Nothing to do

[root@localhost ~]# hp-setup

error: PyQt not installed. GUI not available. Exiting.
warning: PyQt init failed. Reverting to interactive mode.

Installed: PyQt.i386 0:3.17.4-4.fc9
Complete!

root@localhost ~]# hp-setup

error: hplip-gui not installed.  GUI not available. Exiting.
warning: PyQt init failed. Reverting to interactive mode.

[root@localhost ~]# yum install PyQt
root@localhost ~]# hp-setup
(gui this time) worked ok.
Printed a pretty HP test page.
Still not detected by xsane.

will try a reboot.
No - still broken.

[root@localhost ~]# yum install libsane-hpaio
Installed: libsane-hpaio.i386 0:2.8.2-2.fc9
Complete!

and ... FIXED !!
 
thanks
  Mick M.



      

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux