Richard England wrote:
Tim wrote:
On Fri, 2007-08-10 at 21:56 -0700, Richard England wrote:
The drive had a label of "SEAGATE". I changed it, just to be certain,
to "USB_SEAGATE" and remove the /etc/fstab entry for /dev/sdc1.
Setting /etc/mtools.conf and using mlabel as Tim and Matthew
suggested, worked fine.
Upon unplugging and replugging, however,I had the same results. No
desktop icon, no mount.
How are your "removable drives and media" preferences set? That's its
title in Gnome, KDE will probably have something similar. I can't
remember whether you use one of them.
I am using Gnome:
Removable Drive and Media Preferences are set to allow the following for
"Removable Storage"
Mount removable drives when hot-plugged
Mount removable media when inserted
Browse removable media when inserted
"Blank CD and DVD Disks"
{nothing selected]
~~R
Whatever is going on with this Seagate USB drive is NOT new with F7.
I hooked it up to an FC6 machine and had the same results, no desktop
icon, no mount.
The system knows about the device, however.
From /var/log/messages
Aug 12 16:32:35 poirot kernel: usb 1-2: new full speed USB device using
ohci_hcd and address 6
Aug 12 16:32:42 poirot kernel: usb 1-2: configuration #1 chosen from 1
choice
Aug 12 16:32:43 poirot kernel: Initializing USB Mass Storage driver...
Aug 12 16:32:43 poirot kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Aug 12 16:32:43 poirot kernel: usbcore: registered new interface driver
usb-storage
Aug 12 16:32:43 poirot kernel: USB Mass Storage support registered.
Aug 12 16:32:49 poirot kernel: scsi 0:0:0:0: Direct-Access ST316002
3A 8.01 PQ: 0 ANSI: 0
Aug 12 16:32:49 poirot kernel: sd 0:0:0:0: [sda] 312581808 512-byte
hardware sectors (160042 MB)
Aug 12 16:32:49 poirot kernel: sd 0:0:0:0: [sda] Write Protect is off
Aug 12 16:32:49 poirot kernel: sd 0:0:0:0: [sda] Assuming drive cache:
write through
Aug 12 16:32:49 poirot kernel: sd 0:0:0:0: [sda] 312581808 512-byte
hardware sectors (160042 MB)
Aug 12 16:32:49 poirot kernel: sd 0:0:0:0: [sda] Write Protect is off
Aug 12 16:32:49 poirot kernel: sd 0:0:0:0: [sda] Assuming drive cache:
write through
Aug 12 16:32:49 poirot kernel: sda: sda1
Aug 12 16:32:49 poirot kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Aug 12 16:32:49 poirot kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
$ /sbin/lsusb
Bus 001 Device 006: ID 0bc2:0502 Seagate RSS LLC
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
It still sounds like a udev/hal issue.
I've got
idVendor 0x0bc2 Seagate RSS LLC
idProduct 0x0502
Now I guess it means trying figure out how to automate the mount, etc.
Tips, starting points, howtos, anyone?
~~R
