help

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, 

Could you please unsubscribe me from the list?
Thank you very much, 


Hugo Pecora 
t: 020 7961 0063
m. 0788 772 7816 



www.alpineinteractive.co.uk

This message is STRICTLY CONFIDENTIAL and is solely for the individual or organisation to whom it is addressed. If you have received this communication and its attachments in error, please notify us by telephone. Although we have taken steps to ensure that this e-mail and attachments are free from any virus, we cannot accept any responsibility for any transmitted viruses. It is therefore your responsibility to virus scan attachments.

-----Original Message-----
From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of fedora-list-request@xxxxxxxxxx
Sent: 04 December 2006 15:47
To: fedora-list@xxxxxxxxxx
Subject: fedora-list Digest, Vol 34, Issue 33

Send fedora-list mailing list submissions to
	fedora-list@xxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
	https://www.redhat.com/mailman/listinfo/fedora-list
or, via email, send a message with subject or body 'help' to
	fedora-list-request@xxxxxxxxxx

You can reach the person managing the list at
	fedora-list-owner@xxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of fedora-list digest..."


Today's Topics:

   1. kernel panic on dell poweredge 1500sc (Dr. Michael J. Chudobiak)
   2. /var Filesystem Space (Gene Poole)
   3. Re: konqueror : how / where to install Flash ? (Bruno Costacurta)
   4. Re: Problems with ipw2200 wireless in FC6 (Andrea Mastellone)
   5. Re: kernel panic on dell poweredge 1500sc (Mark Haney)
   6. Re: Totem=noshow (Gene Heskett)
   7. Re: kernel panic on dell poweredge 1500sc
      (Dr. Michael J. Chudobiak)
   8. Re: /var Filesystem Space (Craig White)
   9. Re: Nvidia dual head under FC6 (Steve Underwood)
  10. Re: kernel panic on dell poweredge 1500sc (Mark Haney)
  11. Re: Totem=noshow (Craig White)
  12. Re: Duplicating DVDs (Mikkel L. Ellertson)
  13. Vodafone 3G/GPRS Card and FC6 (Moif Murphy)
  14. FC6 Dlink DBT-120 V4 (Charles Fuller)


----------------------------------------------------------------------

Message: 1
Date: Mon, 04 Dec 2006 10:08:06 -0500
From: "Dr. Michael J. Chudobiak" <mjc@xxxxxxxxxxxxxxx>
Subject: kernel panic on dell poweredge 1500sc
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Message-ID: <457439D6.9060305@xxxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi all,

I can't get FC5 or FC6 2.6.18 kernels to work on my Dell Poweredge 
1500sc system. I get a kernel panic, and a message about "not syncing". 
(Sorry for the vagueness, the error messages zoom past, and making the 
system work has been the priority rather than crashing it again).

It worked fine with 2.6.17 kernels. There is a Dell/Adaptec SCSI array 
in the server, using software RAID.

Does this ring a bell for anyone?

I'll try to get a better error message, when the server is available for 
crash tests again...


- Mike



------------------------------

Message: 2
Date: Mon, 4 Dec 2006 10:15:36 -0500
From: Gene Poole <Gene.Poole@xxxxxxx>
Subject: /var Filesystem Space
To: fedora-list@xxxxxxxxxx
Message-ID:
	<OFEC4B37C3.9848BE04-ON8525723A.00535D52-8525723A.0053CED2@xxxxxxx>
Content-Type: text/plain; charset=US-ASCII


I've got /var on a separate filesystem.  Since I've upgraded to FC6, I've
discovered that the space is not adequate to support the FC6 updates.  Two
questions:
   1.  Can someone give me a estimate on how large this filesystem should
   be?
   2.  How can I add space to a standard ext3 filesystem?
I realize that the initial update will require the most space, so a
temporary increase would be the best.

Thanks,
Gene Poole



------------------------------

Message: 3
Date: Mon, 4 Dec 2006 16:17:44 +0100
From: Bruno Costacurta <pubmb01@xxxxxxxxx>
Subject: Re: konqueror : how / where to install Flash ?
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Message-ID: <200612041617.44453.pubmb01@xxxxxxxxx>
Content-Type: text/plain;  charset="iso-8859-15"

On Sunday 03 December 2006 23:46, gary wrote:
> On Sun, 2006-12-03 at 18:26 +0100, Bruno Costacurta wrote:
> > On Sunday 03 December 2006 09:33, gary wrote:
> > > On Sun, 2006-12-03 at 08:04 +0100, Bruno Costacurta wrote:
> > > > Hello,
> > > >
> > > > I follow instructions after downloading
> > > > 'install_flash_player_7_linux.tar' as indicated by Konqueror but
> > > > obviously still not working.
> > > > How / where to install  it ?
> > > >
> > > > Thanks,
> > > > Bruno
> > >
> > > Try this instead (fc5 instructions)=
> > > http://www.gagme.com/greg/linux/fc5-tips.php#flash
> > >
> > >          -----------gary
> >
> > Hummm...I installed flash-plugin (via yum, from macromedia repo) but
> > konqueror continues to complain about missing flash...
> > Any other direction I should follow ?
>
>    google - from =   http://www.konqueror.org/embedded/
>
>
> How do I run Flash plugins with Konqueror/Embedded?
>
> You have to enable the Flash add-on (via --enable-add-ons=kflashpart)
> which is based on the flash library written by Olivier Debon. This add-
> on does not require X but only implements Flash 3 features and a few of
> the Flash 4.
> Other efforts are on the way to port the Netscape plugin support to
> Konq/E (which will require X).
>
>                                 -------------gary


Gary,
thanks a lot for your attention and precision.

My following remark is absolutely not personal and I really do not want to 
start any flame here (I'm a Linux + KDE lover...) but ...arghhh... is it 
really so complicated (what / where is '--enable-add-ons=kflashpart' ?) to 
have a web browser with a ready-to-go Flash support nowadays ?
Or maybe I lost some tricky license around Flash which avoid any decent use 
under Linux ?

So (here I'm trying my last chance...) is there any web browser I can use with 
a 'ready-to-go' Flash support ? 

Thanks for attention.
Bye,
Bruno



------------------------------

Message: 4
Date: Mon, 04 Dec 2006 16:19:15 +0100
From: Andrea Mastellone <andrea.mastellone@xxxxxxxxxxxxx>
Subject: Re: Problems with ipw2200 wireless in FC6
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Message-ID: <45743C73.6080306@xxxxxxxxxxxxx>
Content-Type: text/plain; charset=UTF-8

luca porcu wrote:

> I have solve the problem with this:
> 
> su - (become super user)
> 
> rmmod ipw2200
> 
> now
> 
> modprobe ipw2200
> 
> last passage is not necessary, because the module reloaded by the
> system when is necessary.

I discovered this procedure, but it has a serious drawback:
wpa_supplicant does not work if you unload and reload ipw2200 module.
This is not important when wpa is not necessary.

Vice versa, wpa_supplicant works if you use ifrename.

Andrea



-- 
"Homo sum, nihil humani alienum a me puto." (Terenzio).
"Il vero io è quello che tu sei, non quello che hanno fatto di te." (P.
Coelho)



------------------------------

Message: 5
Date: Mon, 04 Dec 2006 10:25:01 -0500
From: "Mark Haney" <mhaney@xxxxxxxxxxxxxxxx>
Subject: Re: kernel panic on dell poweredge 1500sc
To: "For users of Fedora" <fedora-list@xxxxxxxxxx>
Message-ID: <45743DCD.30905@xxxxxxxxxxxxxxxx>
Content-Type: text/plain;	charset="ISO-8859-1"

Dr. Michael J. Chudobiak wrote:
> Hi all,
> 
> I can't get FC5 or FC6 2.6.18 kernels to work on my Dell Poweredge
> 1500sc system. I get a kernel panic, and a message about "not syncing".
> (Sorry for the vagueness, the error messages zoom past, and making the
> system work has been the priority rather than crashing it again).
> 
> It worked fine with 2.6.17 kernels. There is a Dell/Adaptec SCSI array
> in the server, using software RAID.
> 
> Does this ring a bell for anyone?
> 
> I'll try to get a better error message, when the server is available for
> crash tests again...
> 
> 
> - Mike
> 
Could this be an selinux problem?  I know on a couple of my systems I've
had to disable SELinux because of panic's like that.


-- 
Ceterum censeo, Carthago delenda est.

Mark Haney
Sr. Systems Administrator
ERC Broadband
(828) 350-2415



------------------------------

Message: 6
Date: Mon, 04 Dec 2006 10:17:19 -0500
From: Gene Heskett <gene.heskett@xxxxxxxxxxx>
Subject: Re: Totem=noshow
To: Matthew Saltzman <mjs@xxxxxxxxxxxxxxx>
Cc: fedora-list@xxxxxxxxxx
Message-ID: <200612041017.19282.gene.heskett@xxxxxxxxxxx>
Content-Type: text/plain; charset=us-ascii

On Monday 04 December 2006 09:14, Matthew Saltzman wrote:
>On Mon, 4 Dec 2006, Gene Heskett wrote:
>> On Monday 04 December 2006 07:51, Matthew Saltzman wrote:
>>>> Now what the heck do I do?
>>>
>>> Usually, you delete /var/lib/rpm/__db.* and then rpm --rebuilddb.
>>
>> Just did that, and now the rebuild is actually running, eating
>> considerable amounts of cpu.  Now its done, and there are NO __db.00x
>> files.  But yumex seems to be running ok.
>>
>> Back to the original quest, to get jdk1_5_10 installed, I now have the
>> non-rpm'd version unpacked in /usr/src, but I'm not seeing any
>> installation instructions so I need assistance with this.
>>
>> I believe it was my trying to install their rpm package, which was
>> packed with rpm-4.0.4, and which caused rpm-4.4.3 to segfault & exit,
>> is what hosed my database in the first place.  Is this a known gotcha
>> with rpm-4.4.3?
>
>Not sure.
>
>>>>> So now I'm back to get the other package to see what falls out of
>>>>> the regular linux.bin file.
>>>>>
>>>>>
>>>>> Ok, that unpacked, now where can I find a .spec file so that I can
>>>>> pack it with the newer rpm & then install it?  Or is that not the
>>>>> correct procedure now?
>>
>> I'd like to do this, so its a valid part of the rpm database, can I
>> get the .spec file somewhere?  Or, maybe even better, get it in the
>> right format from the OpenJava site, but the propaganda all reads like
>> its source only & doesn't seem to say if it will build with the
>> current gcc.
>
>As I (sort of) pointed out in another post, the best bet is the NOSRC
> rpms for Sun Java from jpackage.org.  You grab the .nosrc.rpm from
> jpackage and the .bin installer from Sun and follow the instructions on
> the jpackage site.

Which seems to have been pretty well hidden, so far all I've found are the 
src rpms.  The .bin installer I have, unpacked even.  But yum can't find 
the -fc .xml's for fc6 because nothing newer than fc4 is available.  So I 
disabled that repo in order for yumex to proceed.

The only likely looking candidate is in non-free, and is labeled:
java-1.5.0-sun-compat-1.5.0.09.jpp-noarch
which claims to be the jpackage compatibilty for suns jdk of the same 
version number.  Unforch, its 1.5.0.10 I have the .bin for.

I'm going to grab it with yum and see what it might be.

But that's not going to fly:
Missing Dependency: jdk = 2000:1.5.0_09-fcs is needed by package 
java-1.5.0-sun-compat

And I don't believe this package is available as the fc5 & fc6 listings 
aren't even there when I look at the mirrors.  What are we going to have 
to do, wait 2 years before OpenJava gets mature enough to use?

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2006 by Maurice Eugene Heskett, all rights reserved.



------------------------------

Message: 7
Date: Mon, 04 Dec 2006 10:28:14 -0500
From: "Dr. Michael J. Chudobiak" <mjc@xxxxxxxxxxxxxxx>
Subject: Re: kernel panic on dell poweredge 1500sc
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Message-ID: <45743E8E.4040805@xxxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Mark Haney wrote:
> Dr. Michael J. Chudobiak wrote:
>> Hi all,
>>
>> I can't get FC5 or FC6 2.6.18 kernels to work on my Dell Poweredge
>> 1500sc system. I get a kernel panic, and a message about "not syncing".
>> (Sorry for the vagueness, the error messages zoom past, and making the
>> system work has been the priority rather than crashing it again).
>>
>> It worked fine with 2.6.17 kernels. There is a Dell/Adaptec SCSI array
>> in the server, using software RAID.
>>
>> Does this ring a bell for anyone?
>>
> Could this be an selinux problem?  I know on a couple of my systems I've
> had to disable SELinux because of panic's like that.


Well, Selinux is present but disabled:

[root@server2 ~]# sestatus
SELinux status:                 disabled

- Mike



------------------------------

Message: 8
Date: Mon, 04 Dec 2006 08:29:46 -0700
From: Craig White <craigwhite@xxxxxxxxxxx>
Subject: Re: /var Filesystem Space
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Message-ID: <1165246186.27589.47.camel@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain

On Mon, 2006-12-04 at 10:15 -0500, Gene Poole wrote:
> I've got /var on a separate filesystem.  Since I've upgraded to FC6, I've
> discovered that the space is not adequate to support the FC6 updates.  Two
> questions:
>    1.  Can someone give me a estimate on how large this filesystem should
>    be?
>    2.  How can I add space to a standard ext3 filesystem?
> I realize that the initial update will require the most space, so a
> temporary increase would be the best.
----
First, you might want to see where the space is being consumed and see
if there isn't some worthless stuff there...for example, I believe that
until FC-5, it was standard for yum to 'cache' all the update rpm's
which could take up a lot of space. You might want to try 'yum clean
cache' or 'yum clean all' to see if that frees up some space.

To see where the space is being consumed, try 'du -sh /var/*'

In answer to your questions...

1. it depends upon what you are doing on the system.

MySQL & PostgreSQL store their data in /var/lib
Apache will use /var/www/
Various mail programs will use /var/spool

There is no single best answer to question 1

2. LVM allows you to add another drive or change partition sizing. I am
gathering though that you have hard partitioned and not used LVM.
Sometimes you can get away with bind mounting where there is space to
another place where there isn't much space. For example, presume that I
have space in /home that I can yield and I have a lot of data
in /var/spool/mail that I would like to relocate...

mkdir /home/mail
mv /var/spool/mail /var/spool/mail-old
mkdir /var/spool/mail
cp -av /var/spool/mail-old /home/mail
mount --bind /home/mail /var/spool/mail

should sort of work (I'm doing this off the top of my head).

Once you have this working and your data is available, then you could
delete /var/spool/mail-old and add the bind mount to /etc/fstab

Craig



------------------------------

Message: 9
Date: Mon, 04 Dec 2006 23:31:12 +0800
From: Steve Underwood <steveu@xxxxxxxxxxx>
Subject: Re: Nvidia dual head under FC6
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Message-ID: <45743F40.1070702@xxxxxxxxxxx>
Content-Type: text/plain; charset=UTF-8; format=flowed

Lonni J Friedman wrote:

> On 12/3/06, Steve Underwood <steveu@xxxxxxxxxxx> wrote:
>
>> Hi,
>>
>> I have been happily using the Nvidia driver with a dual head setup on an
>> AMD X2 box running FC5 for x86_64. I just upgraded to FC6. Now I can
>> only get a single head setup to work. Has anything changed in how you
>> configure dual head setups? What I get in Xorg.0.log is the following:
>>
>> Backtrace:
>> 0: X(xf86SigHandler+0x71) [0x495ff1]
>> 1: /lib64/libc.so.6 [0x3dc0430210]
>> 2: X(PanoramiXConsolidate+0x154) [0x4ed474]
>> 3: X(main+0x681) [0x432801]
>> 4: /lib64/libc.so.6(__libc_start_main+0xf4) [0x3dc041da44]
>> 5: X(FontFileCompleteXLFD+0x231) [0x4318c9]
>>
>> Fatal server error:
>> Caught signal 11.  Server aborting
>
>
> I'd suggest posting an nvidia-bug-report.log on nvnews.net if you'd
> like help on this.
>
>
I found there is a utility called nvidia-settings. If you run that in 
single screen mode, and ask it for a double screen configuration, it 
produced a very different xorg.conf file from the one I had. This one 
works OK. So, problem solved, but I have no idea why the previous 
xorg.conf file works without problems under FC5.

Steve



------------------------------

Message: 10
Date: Mon, 04 Dec 2006 10:30:30 -0500
From: "Mark Haney" <mhaney@xxxxxxxxxxxxxxxx>
Subject: Re: kernel panic on dell poweredge 1500sc
To: "For users of Fedora" <fedora-list@xxxxxxxxxx>
Message-ID: <45743F16.2090506@xxxxxxxxxxxxxxxx>
Content-Type: text/plain;	charset="ISO-8859-1"

Dr. Michael J. Chudobiak wrote:
> Mark Haney wrote:
>> Dr. Michael J. Chudobiak wrote:
>>> Hi all,
>>>
>>> I can't get FC5 or FC6 2.6.18 kernels to work on my Dell Poweredge
>>> 1500sc system. I get a kernel panic, and a message about "not syncing".
>>> (Sorry for the vagueness, the error messages zoom past, and making the
>>> system work has been the priority rather than crashing it again).
>>>
>>> It worked fine with 2.6.17 kernels. There is a Dell/Adaptec SCSI array
>>> in the server, using software RAID.
>>>
>>> Does this ring a bell for anyone?
>>>
>> Could this be an selinux problem?  I know on a couple of my systems I've
>> had to disable SELinux because of panic's like that.
> 
> 
> Well, Selinux is present but disabled:
> 
> [root@server2 ~]# sestatus
> SELinux status:                 disabled
> 
> - Mike
> 
Well, in the immortal words of Col. Jack O'Neill:  I got nothin'.



-- 
Ceterum censeo, Carthago delenda est.

Mark Haney
Sr. Systems Administrator
ERC Broadband
(828) 350-2415



------------------------------

Message: 11
Date: Mon, 04 Dec 2006 08:07:33 -0700
From: Craig White <craigwhite@xxxxxxxxxxx>
Subject: Re: Totem=noshow
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Message-ID: <1165244853.27589.37.camel@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain

On Mon, 2006-12-04 at 09:42 -0500, Gene Heskett wrote:

> Craig, you are being purposely difficult, I've made it plain several times 
> that what I'm concerned with is the ability to play the videos in any 
> link I might run into off of a site such as /. or cnn.news.
> 
> You keep treating me like a damned pie-rat that wants to make wholesale 
> copies of a popular movie & hawk them on a street corner or flea market.  
> The only copying I might do is a fair use copy, like putting it on my 
> hard drive and the dvd back in its shell on the shelf.  But I have not 
> done that to the half dozen movies I do own on dvd yet.  So stuff it 
> someplace dark please, I'm tired of the accusations.
----
this was your original post...

> What can I replace totem with that will work?
> 
> I'm plumb out of patience with its I can't play this messages that do
> not 
> tell you what it can't play.

this was my reply...

> you mean kind of like the vague information that I see here?
> 
> Just taking a wild ass guess at your problem, I would guess that you
> need to install an unlicensed version of libdvdcss so you can decrypt
> encrypted commercial DVD movies.

you can interpret my reply any way that you wish I would suppose but
given the information presented in the question, I am certain that it
was an appropriate and helpful answer.

I agree that you clarified your problem 4 hours later - probably after
getting a number of replies from others who were similarly unable to
deduce what you were trying to accomplish any more than I could.

The follow up post to which you are replying here was a reply to Kurt
Wall. It had no consideration about what you intended to do with
libdvdcss as that clearly is none of my concern. It wasn't directed
towards you at all so the inferences that you have drawn concerning your
activities were clearly your own.

If I had a complaint to make about your questions/posting, they would be
about being vague and not specific and the fact that you seem to find it
too easy to merely ask the list the questions that get asked at least
every other week and don't bother searching the archives - just like
your follow up questions about rebuilding rpm db. I would expect that
someone who has been on the list as long as you have and using RHL/FC as
long as you have, that you would know how to ask specific questions and
demonstrate what research that you have done to solve the problem.
http://www.catb.org/~esr/faqs/smart-questions.html

Craig



------------------------------

Message: 12
Date: Mon, 04 Dec 2006 09:35:45 -0600
From: "Mikkel L. Ellertson" <mikkel@xxxxxxxxxxxxxxxx>
Subject: Re: Duplicating DVDs
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Message-ID: <45744051.1010507@xxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1

jim tate wrote:
> 
> Can a across the counter video/DVD that has copying potection be
> duplicated in Linux??
> 
> Jim
> 
Yes, but because I live in the U.S.A. I am not allowed to tell you
how. Silly law, but what can I say.

Mikkel
-- 

  Do not meddle in the affairs of dragons,
for thou art crunchy and taste good with Ketchup!



------------------------------

Message: 13
Date: Mon, 4 Dec 2006 15:45:48 +0000
From: "Moif Murphy" <moifmurphy@xxxxxxxxxxxxxx>
Subject: Vodafone 3G/GPRS Card and FC6
To: "For users of Fedora" <fedora-list@xxxxxxxxxx>
Message-ID:
	<54da5b0d0612040745h480c73e7q3091d50248f88ea0@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Has anyone ever tried to get this working in FC6? I'm not having much
luck at the moment, even when following this guide:

http://portal.wikinerds.org/howto-3g-pcmcia-gnu-linux

thanks

-- 
Moif Murphy

Brap.FM covers everything from Downtempo to Techno and everything in
between! (Even 80's Rock). Kicks off at 6pm GMT every Friday and
covers the whole weekend.

http://www.brap.fm
http://www.brightonbreaks.co.uk
http://www.westrecords.co.uk
http://www.myspace.com/brightonbreaks



------------------------------

Message: 14
Date: Mon, 04 Dec 2006 10:46:37 -0500
From: Charles Fuller <charlesrfuller@xxxxxxxxx>
Subject: FC6 Dlink DBT-120 V4
To: fedora-list@xxxxxxxxxx
Message-ID: <457442DD.4070803@xxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1

All,

I have been looking around for information on how to get my Dlink
DBT-120 ver 4 Bluetooth usb adapter to work with FC6.  I have seen one
posting that says it works. Despite the one reference I am having
problems with the device being seen on my laptop.

Prior to using FC6 it worked fine in FC5 and I was able to do DUN with
my Treo 650. The device still shows the power and link likes but as far
as I can tell no joy.

The first place I looked prior to dealing with the Bluetooth issue was
if I could see the USB device.  I do not see the device when I use
'lsusb'.  Below is the output from .config parsed for both USB settings
and then for the Bluetooth, output from "lspci -v".  One last thing the
usb subsystem is able to mount and read/write to usb thumb drives, usb
hard drives and external usb DVD drive with no problem.

Laptop Make/model Gateway 450ROG
kernel 2.6.18-1.2849.fc6
libusb-devel-0.1.12-5.1
libusb-0.1.12-5.1

bluez-libs-3.7-1
bluez-utils-3.7-2
nautilus-sendto-bluetooth-0.7-5.fc6
bluez-utils-cups-3.7-2
bluez-gnome-0.6-1.fc6
gnome-bluetooth-0.7.0-10.1
bluez-hcidump-1.32-1
gnome-bluetooth-devel-0.7.0-10.1
gnome-bluetooth-libs-0.7.0-10.1


Any ideas that I have not tried would be appreciated. Files are below


CONFIG_USB

CONFIG_USB_IRDA=m
CONFIG_USB_ZD1201=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_USBPCWATCHDOG=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_DSBR=m
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
CONFIG_USB_DABUSB=m
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_LIBUSUAL=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TEST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set


CONFIG_BT

CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m

"lspci -v"

00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O
Controller (rev 21)
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, fast devsel, latency 0
        Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP
Controller (rev 21) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 96
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: d0100000-d01fffff
        Prefetchable memory behind bridge: d8000000-dfffffff

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, medium devsel, latency 0, IRQ 11
        I/O ports at 1800 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, medium devsel, latency 0, IRQ 11
        I/O ports at 1820 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, medium devsel, latency 0, IRQ 10
        I/O ports at 1840 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller (rev 03) (prog-if 20 [EHCI])
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, medium devsel, latency 0, IRQ 10
        Memory at d0000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
(prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=0a, sec-latency=64
        I/O behind bridge: 00004000-00005fff
        Memory behind bridge: d0200000-d06fffff
        Prefetchable memory behind bridge: 50000000-53ffffff

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge (rev 03)
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, medium devsel, latency 0, IRQ 10
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at 1860 [size=16]
        Memory at 54000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 03)
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: medium devsel, IRQ 10
        I/O ports at 1880 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, medium devsel, latency 0, IRQ 10
        I/O ports at 1c00 [size=256]
        I/O ports at 18c0 [size=64]
        Memory at d0000c00 (32-bit, non-prefetchable) [size=512]
        Memory at d0000800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
        Subsystem: Askey Computer Corp. Unknown device 1050
        Flags: bus master, medium devsel, latency 0, IRQ 10
        I/O ports at 2400 [size=256]
        I/O ports at 2000 [size=128]
        Capabilities: <access denied>

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250
[Mobility FireGL 9000] (rev 02) (prog-if 00 [VGA])
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, stepping, fast Back2Back, 66MHz, medium
devsel, latency 66, IRQ 11
        Memory at d8000000 (32-bit, prefetchable) [size=128M]
        I/O ports at 3000 [size=256]
        Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at d0120000 [disabled] [size=128K]
        Capabilities: <access denied>

02:02.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet
Controller (rev 02)
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
        Memory at d0600000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at 5000 [size=64]
        Capabilities: <access denied>

02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG
Network Connection (rev 05)
        Subsystem: Intel Corporation Unknown device 2701
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at d0620000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, medium devsel, latency 168, IRQ 10
        Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 50000000-51fff000 (prefetchable)
        Memory window 1: 56000000-57fff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        16-bit legacy interface ports at 0001

02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, medium devsel, latency 168, IRQ 10
        Memory at d0201000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
        Memory window 0: 52000000-53fff000 (prefetchable)
        Memory window 1: 58000000-59fff000
        I/O window 0: 00004800-000048ff
        I/O window 1: 00004c00-00004cff
        16-bit legacy interface ports at 0001

02:05.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
(rev 02) (prog-if 10 [OHCI])
        Subsystem: Gateway 2000 Unknown device 0450
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at d0623000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>



------------------------------

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/fedora-list

End of fedora-list Digest, Vol 34, Issue 33
*******************************************


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux