On Fri, 2005-11-18 at 19:14 -0600, John Pierce wrote: > Gary, again thanks for your response. > > I have tried both the net and local interface, the machine I am > testing from is the local machine and generally speaking it has always > been the net backend that is easiest to configure. > > But from the local machine with both the epkowa and net interfaces > enabled if I had a successful setup I would see both (the net and > local) devices available upon startup of kooka. > > xsane -L tells me there are no scanners available. > > sane-find-scanner finds the scanner as usual and tells me that it > cannot identify the scanner. This is the same report that I used to > get under FC3 and the scanner still worked. > > As for Assumptions forget it, I should have mentioned that upfront. > > John Check out this thread - different os - similar problem. http://www.nabble.com/Still-trying-to-get-Epson-CX6600-to-work.-t445617.html - gary
