Cameron Beattie wrote:
I have the following issue where wget won't resolve a domain name the
first time I try it. It will only resolve the name once I do an nslookup.
Please post the output of:
$ grep hosts /etc/nsswitch.conf
#hosts: db files nisplus nis dns
hosts: files dns
Is the nameserver at 192.168.0.253 reliable?
Try looking up an IP address that you haven't tried recently and see if it
returns the same results every time, e.g.
The results are different the second time, see below:
$ dig @192.168.0.253 www.uit.no
; <<>> DiG 9.2.5 <<>> @192.168.0.253 www.uit.no
; (1 server found)
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44895
;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 3, ADDITIONAL: 3
;; QUESTION SECTION:
;www.uit.no. IN A
;; ANSWER SECTION:
www.uit.no. 86400 IN CNAME w3s2.uit.no.
w3s2.uit.no. 86400 IN A 129.242.5.89
;; AUTHORITY SECTION:
uit.no. 56830 IN NS benoni.uit.no.
uit.no. 56830 IN NS nac.no.
uit.no. 56830 IN NS lozen.uit.no.
;; ADDITIONAL SECTION:
nac.no. 67455 IN A 129.240.2.40
lozen.uit.no. 71859 IN A 129.242.5.254
benoni.uit.no. 56830 IN A 129.242.4.254
;; Query time: 768 msec
;; SERVER: 192.168.0.253#53(192.168.0.253)
;; WHEN: Tue Nov 1 18:31:07 2005
;; MSG SIZE rcvd: 170
$ dig @192.168.0.253 www.uit.no
; <<>> DiG 9.2.5 <<>> @192.168.0.253 www.uit.no
; (1 server found)
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 39902
;; flags: qr rd; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;www.uit.no. IN A
;; ANSWER SECTION:
www.uit.no. 10000 IN A 129.242.5.89
;; Query time: 4 msec
;; SERVER: 192.168.0.253#53(192.168.0.253)
;; WHEN: Tue Nov 1 18:31:51 2005
;; MSG SIZE rcvd: 44
Thanks for your reply
Cameron
