Re: Since FC3 upgrade from FC2 (CD writer error) Any thoughs?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/25/05, Beri, Rohit <linuxlist@xxxxxxxxx> wrote:
> System
> -----------------------
> K3b Version:0.11.14
> KDE Version: 3.3.1-2.9.FC3 Red Hat
> QT Version: 3.3.4
> 
> cdrecord
> -----------------------
> /usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
> /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
> /usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
> /usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using
> setpriority().
> /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
> scsidev: '/dev/hdd'
> devname: '/dev/hdd'
> scsibus: -2 target: -2 lun: -2
> Linux sg driver version: 3.5.27
> /usr/bin/cdrecord: Warning: using inofficial libscg transport code
> version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c
> 1.83 04/05/20 Copyright 1997 J. Schilling').
> SCSI buffer size: 64512
> Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
> Jörg Schilling
> Note: This version is an unofficial (modified) version with DVD support
> Note: and therefore may have bugs that are not present in the original.
> Note: Please send bug reports or support requests to
> http://bugzilla.redhat.com/bugzilla
> Note: The author of cdrecord should not be bothered with problems in
> this version.
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.8'.
> Driveropts: 'burnfree'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 2
> Response Format: 2
> Capabilities   : SYNC
> Vendor_info    : 'YAMAHA  '
> Identifikation : 'CRW3200E        '
> Revision       : '1.0b'
> Device seems to be: Generic mmc CD-RW.
> Current: 0x0009
> Profile: 0x0008
> Profile: 0x0009 (current)
> Profile: 0x000A
> Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
> Driver flags   : MMC-3 SWABAUDIO BURNFREE AUDIOMASTER FORCESPEED
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
> Drive buf size : 7469952 = 7294 KB
> FIFO size      : 4194304 = 4096 KB
> /usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
> /usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using
> setpriority().
> /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
> Track 01: data   152 MB
> Total size:      174 MB (17:19.06) = 77930 sectors
> Lout start:      175 MB (17:21/05) = 77930 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 4
>   Is not unrestricted
>   Is not erasable
>   Disk sub type: Medium Type A, low Beta category (A-) (2)
>   ATIP start of lead in:  -11318 (97:31/07)
>   ATIP start of lead out: 95475 (21:15/00)
> Disk type:    Short strategy type (Phthalocyanine or similar)
> Manuf. index: 22
> Manufacturer: Ritek Co.
> Blocks total: 95475 Blocks current: 95475 Blocks remaining: 17545
> Forcespeed is OFF.
> Speed set to 706 KB/s
> Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
> Last chance to quit, starting real write in 2 seconds.
>    1 seconds.
>    0 seconds.
>  Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> trackno=0
> BURN-Free is OFF.
> Turning BURN-Free on
> Performing OPC...
> /usr/bin/cdrecord: Success. send opc: scsi sendcmd: no error
> CDB:  54 01 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
> Sense Key: 0x3 Medium Error, Segment 0
> Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 8.038s timeout 200s
> /usr/bin/cdrecord: OPC failed.
> Writing  time:   11.098s
> /usr/bin/cdrecord: fifo had 64 puts and 0 gets.
> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
> 100%.
> BURN-Free was never needed.
> 
> cdrecord comand:
> -----------------------
> /usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=6 -dao
> driveropts=burnfree -eject -data -tsize=77930s -
> 
> mkisofs
> -----------------------
> 77930
> INFO: UTF-8 character encoding detected by locale settings.
>  Assuming UTF-8 encoded filenames on source filesystem,
>  use -input-charset to override.
>   0.65% done, estimate finish Mon Apr 25 23:28:58 2005
>   1.29% done, estimate finish Mon Apr 25 23:28:58 2005
>   1.92% done, estimate finish Mon Apr 25 23:28:58 2005
> /usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
> 
> mkisofs comand:
> -----------------------
> /usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset
> -appid K3B THE CD KREATOR VERSION 0.11.14 (C) 2003 SEBASTIAN TRUEG AND
> THE K3B TEAM -publisher  -preparer K3b - Version 0.11.14 -sysid LINUX
> -volset-size 1 -volset-seqno 1 -sort /tmp/kde-user01/k3bw2LkQb.tmp
> -rational-rock -hide-list /tmp/kde-user01/k3b1NvVua.tmp
> -full-iso9660-filenames -iso-level 2 -path-list
> /tmp/kde-user01/k3beRYWba.tmp
> /home/user01/.kde/share/apps/k3b/temp/dummydir0/
> 

Have you:

a) Upgraded cdrecord to latest version?
b) Verified permissions for /usr/bin/cdrecord is 755?
c) Upgraded K3b?
d) Use K3bSetup 2 to configure K3b?
e) Try cdrdao?
f) Checked SELinux context and/or upgraded SELinux policies?


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux