Le mardi 01 fÃvrier 2005 Ã 13:11 +0000, Simon Andrews a Ãcrit : > Eric Tanguy wrote: > > Le dimanche 30 janvier 2005 Ã 20:18 +0100, Eric Tanguy a Ãcrit : > > > >>My bt878 capture card worked before but now with the last updated kernel > >>i can't have it to work. I have no /dev/video*. What could be the > >>problem ? > >> > >>Thanks > >>Eric > > > > When i launch sudo modprobe bttv > > FATAL: Error inserting bttv > > (/lib/modules/2.6.10-1.741_FC3/kernel/drivers/media/video/bttv.ko): > > Unknown symbol in module, or unknown parameter (see dmesg) > > > > And in dmesg : > > bttv: Unknown parameter `' > > This sounds familiar - others have reported the same message for > different modules. I belive that the new kernel is more picky about the > formatting of modprobe.conf. Specifically it barfs if there are extra > spaces at the end of any of the lines. Try deleting any trailing spaces > on lines in modprobe.conf and trying again. > > Simon. > Now the problem is that i receive nothing using tvtime. I have this in demsg : Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 11 (level, low) -> IRQ 11 bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 11, latency: 64, mmio: 0xeb800000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init] tda9885/6/7: chip found @ 0x96 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 . ok bttv0: timeout: drop=338 irq=6288/30866, risc=1c07c03c, bits: HSYNC OFLOW FDSR bttv0: reset, reinitialize bttv0: PLL: 28636363 => 35468950 . ok bttv0: timeout: drop=595 irq=28513/83359, risc=05d5303c, bits: HSYNC OFLOW bttv0: reset, reinitialize bttv0: PLL: 28636363 => 35468950 . ok bttv0: timeout: drop=856 irq=31193/91527, risc=05d5303c, bits: HSYNC OFLOW FBUS FDSR bttv0: reset, reinitialize bttv0: PLL: 28636363 => 35468950 . ok someone have similar pbs with tv card ? -- Eric Tanguy | Nantes, France <eric.tanguy@xxxxxxxxxxxxxx> Key : A4B8368F | Key Server : subkeys.pgp.net Fedora Core release 3 (Heidelberg) sur athlon kernel 2.6.10-1.741_FC3
Attachment:
signature.asc
Description: Ceci est une partie de message =?ISO-8859-1?Q?num=E9riquement?= =?ISO-8859-1?Q?_sign=E9e?=
