Re: FC3 + Dell WUXGA Screen + NVidia = Working Configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I also have a Toshiba Satellite with WXGA 1280x800
screen - I found some very good information here:

   http://www.jeanpierre.de/m30/

Mine is an M35-S456 which is slightly different than
the one on that page, but the screen specs and Nvidia
card are the same.  On the page Jean Pierre refers to
his xorg.conf which he uploaded - in there you'll see
the modelines he used.  I copied the relevant sections
into my xorg.conf and it works.

I also would be interested to see a reference to some
documentation that describes those settings.

Hardy Merrill

--- Gregory Gulik <greg@xxxxxxxxx> wrote:

> 
> This is very interesting.
> 
> I've been struggling with my Toshiba laptop with a
> WXGA 1280x800 
> display.  I've seen several xorg.conf files all have
> issues so I've been 
> trying to figure out the format myself.
> 
> My specific question is how do you determine how to
> write your own 
> ModeLine?  Do you have a reference to good
> documentation on how to make 
> my own?
> 
> 
> Jason McCormick wrote:
> >   I was asked by someone in another thread to post
> my working xorg.conf
> > file since this appears to be a common question
> and mine works.  This
> > configuration file is working on my Dell Inspiron
> 8600 w/ the WUXGA screen
> > and the NVidia drivers (nvidia.com not the nv
> module).  This sets the
> > screen to run in the 16:10 aspect mode at
> 1920x1200, 1680x1050 and 1280x800
> > resolutions.  This configuration has some extra
> tweaking with the
> > DisplaySize directive for the Monitor to make the
> fonts in KDE look right
> > but if you're using Gnome, it's unnecessary.  If
> you have questions or
> > comments, please CC me directly as I generally
> read this list in "batch
> > mode". Please note that some wrapping of lines has
> most likely occurred in
> > your mail reader.  Everything except for "Section"
> and "EndSection" starts
> > one tab in so anything wrapped starting in column
> 1 most likely belongs at
> > the end of the previous line.
> > 
> >   Some notes: I'm not specifying rhgb in
> grub.conf.  I do not use
> > xdm/gdm/kdm so this is not tested with those.  I'm
> setting mode 0600 on
> > /dev/nv* in /etc/security/console.perms. There
> appears to be a problem with
> > GL screensavers running at this aspect/resolution
> that makes them unusable.
> > If someone has a fix for this, I'd like it.  This
> configuration assumes you
> > have the nvidia.com closed-source drivers properly
> installed.
> > 
> > # Xorg configuration
> > 
> > Section "ServerLayout"
> >         Identifier     "single head configuration"
> >         Screen      0  "Screen0" 0 0
> >         InputDevice    "Mouse0" "CorePointer"
> >         InputDevice    "Keyboard0" "CoreKeyboard"
> > EndSection
> > 
> > Section "Files"
> > 
> > # RgbPath is the location of the RGB database. 
> Note, this is the name of
> > the 
> > # file minus the extension (like ".txt" or ".db").
>  There is normally
> > # no need to change the default.
> > # Multiple FontPath entries are allowed (they are
> concatenated together)
> > # By default, Red Hat 6.0 and later now use a font
> server independent of
> > # the X server to render fonts.
> >         RgbPath      "/usr/X11R6/lib/X11/rgb"
> >         FontPath     "unix/:7100"
> > EndSection
> > 
> > Section "Module"
> >         Load  "dbe"
> >         Load  "extmod"
> >         Load  "fbdevhw"
> >         Load  "glx"
> >         Load  "record"
> >         Load  "freetype"
> >         Load  "type1"
> > #       Load  "dri"
> > EndSection
> > 
> > Section "InputDevice"
> > 
> > # Specify which keyboard LEDs can be
> user-controlled (eg, with xset(1))
> > #       Option  "Xleds"         "1 2 3"
> > # To disable the XKEYBOARD extension, uncomment
> XkbDisable.
> > #       Option  "XkbDisable"
> > # To customise the XKB settings to suit your
> keyboard, modify the
> > # lines below (which are the defaults).  For
> example, for a non-U.S.
> > # keyboard, you will probably want to use:
> > #       Option  "XkbModel"      "pc102"
> > # If you have a US Microsoft Natural keyboard, you
> can use:
> > #       Option  "XkbModel"      "microsoft"
> > #
> > # Then to change the language, change the Layout
> setting.
> > # For example, a german layout can be obtained
> with:
> > #       Option  "XkbLayout"     "de"
> > # or:
> > #       Option  "XkbLayout"     "de"
> > #       Option  "XkbVariant"    "nodeadkeys"
> > #
> > # If you'd like to switch the positions of your
> capslock and
> > # control keys, use:
> > #       Option  "XkbOptions"    "ctrl:swapcaps"
> > # Or if you just want both to be control, use:
> > #       Option  "XkbOptions"    "ctrl:nocaps"
> > #
> >         Identifier  "Keyboard0"
> >         Driver      "kbd"
> >         Option      "XkbModel" "pc105"
> >         Option      "XkbLayout" "us"
> > EndSection
> > 
> > Section "InputDevice"
> >         Identifier  "Mouse0"
> >         Driver      "mouse"
> >         Option      "Protocol" "IMPS/2"
> >         Option      "Device" "/dev/input/mice"
> >         Option      "ZAxisMapping" "4 5"
> >         Option      "Emulate3Buttons" "yes"
> > EndSection
> > 
> > Section "Modes"
> >         Identifier   "16:10"
> >         ModeLine     "1280x800" 107.2 1280 1360
> 1496 1712 800 801 804 835
> >         ModeLine     "1280x800" 123.4 1280 1368
> 1504 1728 800 801 804 840
> >         ModeLine     "1280x800" 147.9 1280 1376
> 1512 1744 800 801 804 848
> >         ModeLine     "1680x1050" 147.1 1680 1784
> 1968 2256 1050 1051 1054
> > 1087
> >         ModeLine     "1680x1050" 188.1 1680 1800
> 1984 2288 1050 1051 1054
> > 1096
> >         ModeLine     "1680x1050" 214.5 1680 1800
> 1984 2288 1050 1051 1054
> > 1103
> >         ModeLine     "1680x1050" 256.2 1680 1808
> 1992 2304 1050 1051 1054
> > 1112
> >         ModeLine     "1920x1200" 193.16 1920 2048
> 2256 2592 1200 1201 1204
> > 1242 
> > -Hsync +Vsync
> > EndSection
> > 
> > Section "Monitor"
> >         Identifier   "Monitor0"
> >         VendorName   "Dell WUXGA"
> >         ModelName    "LCD Panel 1920x1200"
> >         UseModes     "16:10"
> >         HorizSync    31.5 - 90.0
> >         VertRefresh  60.0 - 60.0
> >         DisplaySize  505 315
> >         Option      "dpms"
> > EndSection
> > 
> > Section "Device"
> > 
> >         Option      "FlatPanel" "1"
> >         Option      "UseEdidFreqs" "yes"
> >         Option      "FlatPanelProperties" "Scaling
> = aspect-scaled"
> >         Option      "NvAGP" "3"
> >         Identifier  "Videocard0"
> >         Driver      "nvidia"
> >         VendorName  "NVIDIA"
> >         BoardName   "NVIDIA GeForce FX (generic)"
> > EndSection
> > 
> > Section "Screen"
> >         Identifier "Screen0"
> >         Device     "Videocard0"
> >         Monitor    "Monitor0"
> >         DefaultDepth     24
> >         SubSection "Display"
> >         Viewport   0 0
> >         Depth     24
> >         Modes    "1920x1200" "1680x1050"
> "1280x1024" 
=== message truncated ===



		
__________________________________ 
Do you Yahoo!? 
The all-new My Yahoo! - Get yours free! 
http://my.yahoo.com 
 


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux