Sound not working after upgrading FC1 -> FC2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Yes, I've checked the archives but it still doesn't work. It of course worked fine in FC1.


One suggestion was to use the ALSA driver.  How do I do that??

The sound device is built into the motherboard and is a:
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)


When I run system-config-sound it shows:
The following audio device was detected.
Vendor: VIA Technologies
Model: VT8233/A/8235/8237 AC97 Audio Controller
Module: snd-via82xx

/etc/modules.conf contains the following relevant bits:
alias sound-slot-0 via82cxxx_audio
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :



/etc/modprobe.conf contains the following bits:
alias snd-card-0 snd-via82xx
install sound-slot-0 /sbin/modprobe --first-time --ignore-install sound-slot-0 && { /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :; }
remove sound-slot-0 { /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :; } ; /sbin/modprobe -r --first-time --ignore-remove sound-slot-0



The volume control app shows entries for both "Analog Devices AD1980 [Audio Mixer (OSS)]" as well as "VIA 8235 [Alsa Mixer]"


After a reboot almost all the volumes are very low. I cranked them all up and still no sound.


Any suggestions?

--
Greg Gulik                                 http://www.gulik.org/greg/
greg @ gulik.org



[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux