Re: Synaptics touchpad on Dell Latitude CPx H500GT ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2004-04-13 at 00:02, William Hooper wrote:
> Bruen, Mark said:
> > I have a Dell Latitude CPx H500GT notebook P3 500MHz running FC 1. The
> > touchpad is a big pain. I tried loading the synaptics driver and
> > configuring XF86Config but when the driver loads it claims there are no
> > synaptics devices found. Are there any other manufacturers touchpads
> > installed in Dell CPx notebooks or a way to tell?

i had the sam problem with a new version of the synaptics driver....
try to get this: http://w1.894.telia.com/~u89404340/touchpad/files/
the 0.12.5
for me works great
the edit the XF86Config file by adding in the input device section
Driver    "Synaptics"

this is my full XF86Config

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name
of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "it"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "synaptics"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "IMPS/2"
	Option	    "LeftEdge" "1700"
	Option	    "RightEdge" "5300"
	Option	    "TopEdge" "1700"
	Option	    "BottomEdge" "4200"
	Option	    "FingerLow" "25"
	Option	    "FingerHigh" "30"
	Option	    "MaxTapTime" "180"
	Option	    "MaxTapMove" "220"
	Option	    "VertScrollDelta" "100"
	Option	    "MinSpeed" "0.06"
	Option	    "MaxSpeed" "0.12"
	Option	    "AccelFactor" "0.0010"
	Option	    "SHMConfig" "on"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
	Identifier  "DevInputMice"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "LCD Panel 1024x768"
	HorizSync    31.5 - 48.5
	VertRefresh  40.0 - 70.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "i810"
	VendorName  "Videocard vendor"
	BoardName   "Intel 852"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Depth     16
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection

Byez



[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux