Re: Xinerama

On Sun, 2003-11-09 at 07:39, Mike A. Harris wrote:
> On Sat, 8 Nov 2003, Scott A Phipps wrote:
> 
> >After upgrading to Fedora Core 1 I can no longer get xinerama to work. 
> 
> Upgrading from what?
> 
> >Neither my XFree86config file will work, nor one freshly generated by
> >redhat's conig tool.  X work in either case, but the screens are the
> >same.  Even with spanning desktop turned on I get a cloned view.  I am
> >using a radeon 7500 with two vga monitors.  Anybody have any ideas?  Has
> >anyone else had this problem?
> 
> Try using the config file option:
> 
> 	MonitorLayout "CRT" "CRT"
> 
> 
> 

I did a wipe and reinstall last night so I would have a fresh copy of
Fedora Core 1 and the problem persists.  I added the MonitorLayout Line
and nothing changed.  Attached is my config file.

Thanks

Scott

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
	Identifier     "Multihead layout"
	Screen      0  "Screen0" LeftOf "Screen1"
	Screen      1  "Screen1" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "DevInputMice" "AlwaysCore"
	Option	    "Xinerama" "on"
	Option	    "Clone" "off"
	Option	    "MonitorLayout" "CRT,CRT"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "PS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
	Identifier  "DevInputMice"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor 1024x768"
	HorizSync    31.5 - 57.0
	VertRefresh  50.0 - 70.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor 1024x768"
	HorizSync    31.5 - 57.0
	VertRefresh  50.0 - 70.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "radeon"
	VendorName  "Videocard vendor"
	BoardName   "ATI Radeon 7500"
	BusID	    "PCI:1:5:0"
	Screen		0
	#Option	    MonitorLayout "CRT" "CRT"
	#Option	    MonitorLayout "CRT,CRT"
EndSection

Section "Device"
	Identifier  "Videocard1"
	Driver      "radeon"
	VendorName  "Videocard Vendor"
	BoardName   "ATI Radeon 7500"
	BusID       "PCI:1:5:0"
	Screen		1
	#Option	    MonitorLayout "CRT,CRT"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Videocard1"
	Monitor    "Monitor1"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1024x768"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection