[PATCH] Updates to nfsroot documentation (take 2)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The difference between ip=off and ip=::::::off has been a cause of much
confusion.  Document how each behaves, and do not contradict ourselves
by saying that "off" is the default when in fact "any" is the default
and is descibed as being so lower in the file.

Signed-off-by: Amos Waterland <[email protected]>

 Documentation/nfsroot.txt |    9 ++++++---
 net/ipv4/ipconfig.c       |   20 +-------------------
 2 files changed, 7 insertions(+), 22 deletions(-)

diff --git a/Documentation/nfsroot.txt b/Documentation/nfsroot.txt
index 16a7cae..ac04a1d 100644
--- a/Documentation/nfsroot.txt
+++ b/Documentation/nfsroot.txt
@@ -92,8 +92,11 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
   autoconfiguration.
 
   The <autoconf> parameter can appear alone as the value to the `ip'
-  parameter (without all the ':' characters before) in which case auto-
-  configuration is used.
+  parameter (without all the ':' characters before).  If the value is
+  "ip=off" or "ip=none", no autoconfiguration will take place, otherwise
+  autoconfiguration will take place.  Note that "ip=off" is not the same
+  thing as "ip=::::::off", because in the latter autoconfiguration will take
+  place if any of DHCP, BOOTP or RARP are compiled in the kernel.
 
   <client-ip>	IP address of the client.
 
@@ -142,7 +145,7 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
 		into the kernel will be used, regardless of the value of
 		this option.
 
-                  off or none: don't use autoconfiguration (default)
+                  off or none: don't use autoconfiguration
 		  on or any:   use any protocol available in the kernel
 		  dhcp:        use DHCP
 		  bootp:       use BOOTP
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index c5c107a..96400b0 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -1396,25 +1396,7 @@ late_initcall(ip_auto_config);
 
 /*
  *  Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel
- *  command line parameter. It consists of option fields separated by colons in
- *  the following order:
- *
- *  <client-ip>:<server-ip>:<gw-ip>:<netmask>:<host name>:<device>:<PROTO>
- *
- *  Any of the fields can be empty which means to use a default value:
- *	<client-ip>	- address given by BOOTP or RARP
- *	<server-ip>	- address of host returning BOOTP or RARP packet
- *	<gw-ip>		- none, or the address returned by BOOTP
- *	<netmask>	- automatically determined from <client-ip>, or the
- *			  one returned by BOOTP
- *	<host name>	- <client-ip> in ASCII notation, or the name returned
- *			  by BOOTP
- *	<device>	- use all available devices
- *	<PROTO>:
- *	   off|none	    - don't do autoconfig at all (DEFAULT)
- *	   on|any           - use any configured protocol
- *	   dhcp|bootp|rarp  - use only the specified protocol
- *	   both             - use both BOOTP and RARP (not DHCP)
+ *  command line parameter.  See Documentation/nfsroot.txt.
  */
 static int __init ic_proto_name(char *name)
 {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux