Re: [PATCH] PCMCIA: prevent auto insert during resume.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 26, 2007 at 05:36:51PM +0100, Russell King wrote:
> On Fri, Oct 26, 2007 at 06:27:06PM +0200, Rodolfo Giometti wrote:
> > On Fri, Oct 26, 2007 at 05:02:06PM +0100, Russell King wrote:
> > > When you bring the battery device out of resume, and you've inserted a
> > > card, you want it to be detected.  Your change means you have to wait
> > > until the system has finished resuming before you plug the card in,
> > > which practically is a pain in the butt and actually leads to user
> > > errors.  IOW:
> > > 
> > > "I plugged my wireless card in after I pressed the power button, why
> > > wasn't it detected?"
> > 
> > My patch doesn't affect the power on sequence, just the resume
> > one.
> 
> On a lot of devices, the "power button" is the resume button.  When you
> "turn it off" it suspends, and when you "turn it on" it resumes.

I see. My device has two buttons.

However even in this case, if you never eject the device, then switch
off (sleep), change the device into the slot and then power on (wake
up), with my patch everything continues to work as before.

The differences come up only if you eject the device before power off.

> > Also if you didn't eject the socket, at resume the device will be
> > powered up again, my patch just prevents that a pre-powered off device
> > to be turned on at resume time.
> > 
> > However you should consider that some embedded systems have fixed
> > PCMCIA devices that can't be removed so there are no reasons to detect
> > them after resume, nobody can change them. :)
> > 
> > Also battery powered devices can go very frequently to sleep and the
> > current behavior force the user to switch off the unused device each
> > time the system resumes from sleep.
> 
> I realise that.  I do work on embedded devices, and this behaviour is
> explicitly there to support embedded devices.
> 
> I've suggested a workable solution to you which allows both of us to
> have the behaviour we both desire from the system.  That sounds like
> a negotiated solution to me...

Do you mean to switch off the socket from userland? It could be a
solution but in this case the device is powered on each time even if
for a short delay...

Maybe we can add an entry into sysfs? Or just a module parameter? So
developers can choose their preferred behaviour. :)

Thanks for your time,

Rodolfo

-- 

GNU/Linux Solutions                  e-mail:    [email protected]
Linux Device Driver                             [email protected]
Embedded Systems                     		[email protected]
UNIX programming                     phone:     +39 349 2432127
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux