Re: [Samba] 2.6.22/realtek bug in hardware, any kernel work-around?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Sun, 30 Sep 2007, Sinisa Bandin wrote:


Justin Piszcz wrote:
Package: samba
Version: 3.0.26a-1

Kernel: 2.6.22

samba 3.0.26a-1 performance < 900 KiB/s, but FTP = 30-90 MiB/s

Let me start out by saing this is an oddball problem:

SAMBA:
LINUX -> WINDOWS = < 900 KiB/s (varies between 100 - 900 KiB/s)
WINDOWS -> LINUX = 30-90 MiB/s (always)

FTP:
Either direction, 30-90 MiB/s (always)

I do not see any nasty errors in the logs even with verbose = 5.

Any ideas here? I am not using any special options.

I found out that poor smb performance is related to a broken udp-perfomance of the 8169 NIC in outgoing udp.
But, only in Gb Mode of the 8169 NIC, with 100Mbps it is ok.

I had exactly the same problem with 100Mb/s also.

Solved by disabling onboard LAN interface and inserting (US Robotics) Realtek 8139 based card (10/100 Mbps).

Best regards,
Sinisa Bandin


Thank you for your response, so the bottom line is Realtek 1Gbps NICs are unreliable. Wonder what Realtek has to say about it if they even respond, added them to cc list.

Justin.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux