Driver will call cmd completion routine from Reset path without waiting for cmd completion from isr context.
Signed-off-by: Bo Yang <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas.c | 107 ++++++++++++-------------
drivers/scsi/megaraid/megaraid_sas.h | 2
2 files changed, 55 insertions(+), 54 deletions(-)
diff -uprN linux-2.6.22_orig/drivers/scsi/megaraid/megaraid_sas.c linux-2.6.22_new/drivers/scsi/megaraid/megaraid_sas.c
--- linux-2.6.22_orig/drivers/scsi/megaraid/megaraid_sas.c 2007-09-27 05:48:10.000000000 -0700
+++ linux-2.6.22_new/drivers/scsi/megaraid/megaraid_sas.c 2007-09-27 21:31:34.000000000 -0700
@@ -109,6 +109,10 @@ static DEFINE_MUTEX(megasas_async_queue_
static u32 megasas_dbg_lvl;
+static void
+megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
+ u8 alt_status);
+
/**
* megasas_get_cmd - Get a command from the free pool
* @instance: Adapter soft state
@@ -919,6 +923,49 @@ static int megasas_slave_configure(struc
}
/**
+ * megasas_complete_cmd_dpc - Returns FW's controller structure
+ * @instance_addr: Address of adapter soft state
+ *
+ * Tasklet to complete cmds
+ */
+static void megasas_complete_cmd_dpc(unsigned long instance_addr)
+{
+ u32 producer;
+ u32 consumer;
+ u32 context;
+ struct megasas_cmd *cmd;
+ struct megasas_instance *instance =
+ (struct megasas_instance *)instance_addr;
+ unsigned long flags;
+
+ /* If we have already declared adapter dead, donot complete cmds */
+ if (instance->hw_crit_error)
+ return;
+
+ spin_lock_irqsave(&instance->completion_lock, flags);
+
+ producer = *instance->producer;
+ consumer = *instance->consumer;
+
+ while (consumer != producer) {
+ context = instance->reply_queue[consumer];
+
+ cmd = instance->cmd_list[context];
+
+ megasas_complete_cmd(instance, cmd, DID_OK);
+
+ consumer++;
+ if (consumer == (instance->max_fw_cmds + 1)) {
+ consumer = 0;
+ }
+ }
+
+ *instance->consumer = producer;
+
+ spin_unlock_irqrestore(&instance->completion_lock, flags);
+}
+
+/**
* megasas_wait_for_outstanding - Wait for all outstanding cmds
* @instance: Adapter soft state
*
@@ -941,6 +988,11 @@ static int megasas_wait_for_outstanding(
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
printk(KERN_NOTICE "megasas: [%2d]waiting for %d "
"commands to complete\n",i,outstanding);
+ /*
+ * Call cmd completion routine. Cmd to be
+ * be completed directly without depending on isr.
+ */
+ megasas_complete_cmd_dpc((unsigned long)instance);
}
msleep(1000);
@@ -1820,60 +1872,6 @@ megasas_get_ctrl_info(struct megasas_ins
}
/**
- * megasas_complete_cmd_dpc - Returns FW's controller structure
- * @instance_addr: Address of adapter soft state
- *
- * Tasklet to complete cmds
- */
-static void megasas_complete_cmd_dpc(unsigned long instance_addr)
-{
- u32 producer;
- u32 consumer;
- u32 context;
- struct megasas_cmd *cmd;
- struct megasas_instance *instance = (struct megasas_instance *)instance_addr;
- unsigned long flags;
-
- /* If we have already declared adapter dead, donot complete cmds */
- if (instance->hw_crit_error)
- return;
-
- producer = *instance->producer;
- consumer = *instance->consumer;
-
- while (consumer != producer) {
- context = instance->reply_queue[consumer];
-
- cmd = instance->cmd_list[context];
-
- megasas_complete_cmd(instance, cmd, DID_OK);
-
- consumer++;
- if (consumer == (instance->max_fw_cmds + 1)) {
- consumer = 0;
- }
- }
-
- *instance->consumer = producer;
-
- /*
- * Check if we can restore can_queue
- */
- if (instance->flag & MEGASAS_FW_BUSY
- && time_after(jiffies, instance->last_time + 5 * HZ)
- && atomic_read(&instance->fw_outstanding) < 17) {
-
- spin_lock_irqsave(instance->host->host_lock, flags);
- instance->flag &= ~MEGASAS_FW_BUSY;
- instance->host->can_queue =
- instance->max_fw_cmds - MEGASAS_INT_CMDS;
-
- spin_unlock_irqrestore(instance->host->host_lock, flags);
- }
-
-}
-
-/**
* megasas_issue_init_mfi - Initializes the FW
* @instance: Adapter soft state
*
@@ -2537,6 +2535,7 @@ megasas_probe_one(struct pci_dev *pdev,
init_waitqueue_head(&instance->abort_cmd_wait_q);
spin_lock_init(&instance->cmd_pool_lock);
+ spin_lock_init(&instance->completion_lock);
sema_init(&instance->aen_mutex, 1);
sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);
diff -uprN linux-2.6.22_orig/drivers/scsi/megaraid/megaraid_sas.h linux-2.6.22_new/drivers/scsi/megaraid/megaraid_sas.h
--- linux-2.6.22_orig/drivers/scsi/megaraid/megaraid_sas.h 2007-09-26 15:15:26.000000000 -0700
+++ linux-2.6.22_new/drivers/scsi/megaraid/megaraid_sas.h 2007-09-27 04:58:15.000000000 -0700
@@ -1086,6 +1086,8 @@ struct megasas_instance {
struct megasas_cmd **cmd_list;
struct list_head cmd_pool;
spinlock_t cmd_pool_lock;
+ /* used to synch producer, consumer ptrs in dpc */
+ spinlock_t completion_lock;
struct dma_pool *frame_dma_pool;
struct dma_pool *sense_dma_pool;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
