Hi Jean, 2007/5/14, Jean Delvare <[email protected]>: [cut]
This is a rather bad idea to build the abituguru and hdaps drivers into your kernel if you don't have these devices. Especially abituguru, as it does arbitrary port probing.
My bad. I have an abit motherboard and in doubt I selected the driver (and then leaved selected since all worked on previous kernels). I've disabled them and the problem persist.
> > > The first column of lsmod list the same modules in both kernels. The > > > diff-ed dmesg is attached. > > > > Please provide the output of lsmod. > > > > If you are using one of the following drivers: lm78, smsc47b397, > > smsc47m1, w83627hf or w83781d, you need lm_sensors >= 2.10.1 > > (libsensors.so.3.1.1 or later). > > I've attached the lsmod for 2.6.22-rc. You didn't.
:) Right, sorry. Now it is.
> I'm not using any of the listed drivers. How strange, why are they loaded then?
My reply refers to your list of drivers that require a certain version of lm-sensors.
> However the lm-sensors package is version 2.10.1-3 and > libsensors.so.3.1.1 is on my system too (package libsensors3). Can you please share the output of "sensors" under both kernels 2.6.21.1 and 2.6.22-rc1.
Sure. On 2.6.21.1:
via686a-isa-6000
Adapter: ISA adapter
CPU core: +1.63 V (min = +0.06 V, max = +3.10 V)
+2.5V: +2.45 V (min = +0.06 V, max = +3.10 V)
I/O: +3.52 V (min = +3.12 V, max = +3.45 V) ALARM
+5V: +5.05 V (min = +4.73 V, max = +5.20 V)
+12V: +12.30 V (min = +11.35 V, max = +12.48 V)
CPU Fan: 0 RPM (min = 42187 RPM, div = 2)
P/S Fan: 2657 RPM (min = 42187 RPM, div = 2) ALARM
SYS Temp: +40.9°C (high = +146°C, hyst = -71°C)
CPU Temp: +43.3°C (high = +146°C, hyst = -71°C)
SBr Temp: +24.9°C (high = -63°C, hyst = -71°C) ALARM
while on 2.6.22-rc1:
via686a-i2c-9191-6000
ERROR: Can't get adapter or algorithm?!?
CPU core: +1.65 V (min = +0.06 V, max = +3.10 V)
+2.5V: +2.45 V (min = +0.06 V, max = +3.10 V)
I/O: +3.52 V (min = +3.12 V, max = +3.45 V) ALARM
+5V: +5.08 V (min = +4.73 V, max = +5.20 V)
+12V: +12.24 V (min = +11.35 V, max = +12.48 V)
CPU Fan: 0 RPM (min = 42187 RPM, div = 2)
P/S Fan: 0 RPM (min = 42187 RPM, div = 2) ALARM
SYS Temp: +41.3°C (high = +146°C, hyst = -71°C)
CPU Temp: +41.8°C (high = +146°C, hyst = -71°C)
SBr Temp: +24.9°C (high = -63°C, hyst = -71°C) ALARM
In both kernels I have set:
I2C Algorithms --->
<M> I2C PCF 8584 interfaces
<M> I2C PCA 9564 interfaces
I would also be interested in a diff of /proc/ioports between 2.6.21.1 and 2.6.22-rc1.
The diff is empty.
-- Jean Delvare
~ Antonio
Attachment:
lsmod.2.6.22-rc1.gz
Description: GNU Zip compressed data
- Follow-Ups:
- Re: Linux 2.6.22-rc1
- From: Jean Delvare <[email protected]>
- Re: Linux 2.6.22-rc1
- References:
- Linux 2.6.22-rc1
- From: Linus Torvalds <[email protected]>
- Re: Linux 2.6.22-rc1
- From: "Antonino Ingargiola" <[email protected]>
- Re: Linux 2.6.22-rc1
- From: Linus Torvalds <[email protected]>
- Re: Linux 2.6.22-rc1
- From: "Antonino Ingargiola" <[email protected]>
- Re: Linux 2.6.22-rc1
- From: Jean Delvare <[email protected]>
- Re: Linux 2.6.22-rc1
- From: "Antonino Ingargiola" <[email protected]>
- Re: Linux 2.6.22-rc1
- From: Jean Delvare <[email protected]>
- Linux 2.6.22-rc1
- Prev by Date: Read-only bind mount patches
- Next by Date: [PATCH 0/5][TAKE2] fallocate system call
- Previous by thread: Re: Linux 2.6.22-rc1
- Next by thread: Re: Linux 2.6.22-rc1
- Index(es):
 |