Re: [PATCH] change global zonelist order on NUMA v3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2007-04-26 at 19:53 +0900, KAMEZAWA Hiroyuki wrote:
> Changelog V2 -> V3
> 
> - removed zone ordering selection knobs...
> 
> much simpler one. just changing zonelist ordering.
> tested on ia64 NUMA works well as expected.
> 
> -Kame
> 
> 
> change zonelist order on NUMA v3.
> 
> [Description]
> Assume 2 node NUMA, only node(0) has ZONE_DMA.
> (ia64's ZONE_DMA is below 4GB...x86_64's ZONE_DMA32)
> 
> In this case, current default (node0's) zonelist order is
> 
> Node(0)'s NORMAL -> Node(0)'s DMA -> Node(1)"s NORMAL.
> 
> This means Node(0)'s DMA will be used before Node(1)'s NORMAL.
> This will cause OOM on ZONE_DMA easily.

We have a similar situation on HP Intergrity [ia64-based] platforms.
The platform supports cache-line interleaved memory or cell local
memory--a firmware configuration option.  Even configured for "100% Cell
Local Memory [CLM]", we have a small amount of interleaved memory at
physical address zero.  [I think the DIG spec may require this?  CLM
shows up at some ridiculously high physical address.]  Here, "small
amount" means ~512MB for a 4 node system and ~1G for a 16node system.
This shows up as the only DMA memory [below 4G] on the system. 

The interleaved memory shows up as a pseudo-node "N" in an N-node
platform.  I.e., nodes 0-N-1 represent the real physical nodes and node
N is the pseudo-node containing only interleaved memory [no cpus nor
IO].  The firmware tells us, via the SLIT, that the interleaved
pseudo-node is closer to all physical nodes than any other real
node--apparently based on the theory that the average latency is less
because it contains some local memory.  This means that with the current
zone ordering, the DMA zone ends up as the second zone in each node's
Normal zonelist.  Thus, we are subject to the same DMA zone exhaustion
that this patch addresses.

I have tested the patch on our platforms and it appears to work as
advertised.

Thanks, Kame!

Question:  why remove the comments below?  Especially the ones that
attempt to explain the rationale for the logic?

Lee

> 
> This patch changes *default* zone order to
> 
> Node(0)'s NORMAL -> Node(1)'s NORMAL -> Node(0)'s DMA.
> 
> tested ia64 2-Node NUMA. works well.
> 
> Signed-Off-By: KAMEZAWA Hiroyuki <[email protected]>
> 
> Index: linux-2.6.21-rc7-mm2/mm/page_alloc.c
> ===================================================================
> --- linux-2.6.21-rc7-mm2.orig/mm/page_alloc.c
> +++ linux-2.6.21-rc7-mm2/mm/page_alloc.c
> @@ -2023,6 +2023,7 @@ void show_free_areas(void)
>   *
>   * Add all populated zones of a node to the zonelist.
>   */
> +#ifndef CONFIG_NUMA
>  static int __meminit build_zonelists_node(pg_data_t *pgdat,
>  			struct zonelist *zonelist, int nr_zones, enum zone_type zone_type)
>  {
> @@ -2042,6 +2043,7 @@ static int __meminit build_zonelists_nod
>  	} while (zone_type);
>  	return nr_zones;
>  }
> +#endif
>  
>  #ifdef CONFIG_NUMA
>  #define MAX_NODE_LOAD (num_online_nodes())
> @@ -2106,52 +2108,51 @@ static int __meminit find_next_best_node
>  	return best_node;
>  }
>  
> +/*
> + * Build zonelist based on zone priority.
> + */
> +static int __meminitdata node_order[MAX_NUMNODES];
>  static void __meminit build_zonelists(pg_data_t *pgdat)
>  {
> -	int j, node, local_node;
> -	enum zone_type i;
> -	int prev_node, load;
> -	struct zonelist *zonelist;
> +	int i, j, pos, zone_type, node, load;
>  	nodemask_t used_mask;
> +	int local_node, prev_node;
> +	struct zone *z;
> +	struct zonelist *zonelist;
>  
> -	/* initialize zonelists */
>  	for (i = 0; i < MAX_NR_ZONES; i++) {
>  		zonelist = pgdat->node_zonelists + i;
>  		zonelist->zones[0] = NULL;
>  	}
> -
> -	/* NUMA-aware ordering of nodes */
> +	memset(node_order, 0, sizeof(node_order));
>  	local_node = pgdat->node_id;
>  	load = num_online_nodes();
>  	prev_node = local_node;
>  	nodes_clear(used_mask);
> +	j = 0;
>  	while ((node = find_next_best_node(local_node, &used_mask)) >= 0) {
>  		int distance = node_distance(local_node, node);
> -
> -		/*
> -		 * If another node is sufficiently far away then it is better
> -		 * to reclaim pages in a zone before going off node.
> -		 */
>  		if (distance > RECLAIM_DISTANCE)
>  			zone_reclaim_mode = 1;
> -
> -		/*
> -		 * We don't want to pressure a particular node.
> -		 * So adding penalty to the first node in same
> -		 * distance group to make it round-robin.
> -		 */
> -
>  		if (distance != node_distance(local_node, prev_node))
> -			node_load[node] += load;
> +			node_load[node] = load;
> +		node_order[j++] = node;
>  		prev_node = node;
>  		load--;
> -		for (i = 0; i < MAX_NR_ZONES; i++) {
> -			zonelist = pgdat->node_zonelists + i;
> -			for (j = 0; zonelist->zones[j] != NULL; j++);
> -
> -	 		j = build_zonelists_node(NODE_DATA(node), zonelist, j, i);
> -			zonelist->zones[j] = NULL;
> +	}
> +	/* calculate node order */
> +	for (i = 0; i < MAX_NR_ZONES; i++) {
> +		zonelist = pgdat->node_zonelists + i;
> +		pos = 0;
> +		for (zone_type = i; zone_type >= 0; zone_type--) {
> +			for (j = 0; j < num_online_nodes(); j++) {
> +				node = node_order[j];
> +				z = &NODE_DATA(node)->node_zones[zone_type];
> +				if (populated_zone(z))
> +					zonelist->zones[pos++] = z;
> +			}
>  		}
> +		zonelist->zones[pos] = NULL;
>  	}
>  }
>  
> @@ -2239,6 +2240,7 @@ void __meminit build_all_zonelists(void)
>  		__build_all_zonelists(NULL);
>  		cpuset_init_current_mems_allowed();
>  	} else {
> +		memset(node_load, 0, sizeof(node_load));
>  		/* we have to stop all cpus to guaranntee there is no user
>  		   of zonelist */
>  		stop_machine_run(__build_all_zonelists, NULL, NR_CPUS);
> 
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to [email protected].  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"[email protected]";> [email protected] </a>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux