Hello,
I have the same "problems" with CPU-Hotplug. Whenever I turn off the
second core and turn it back on, /proc/cpuinfo shows that the second
core is on, but at a different speed.
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm
extapic cr8legacy ts fid vid ttp tm stc
bogomips : 1596.96
clflush size : 64
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60
stepping : 2
cpu MHz : 1995.071
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm
extapic cr8legacy ts fid vid ttp tm stc
bogomips : 3990.71
clflush size : 64
dmesg shows the following after resume from s2disk (only the first
time, then "CPU: Vendor unknown../Your system my be unstable" doesn't
appear):
Disabling non-boot CPUs ...
Cannot set affinity for irq 0
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.61 BogoMIPS (lpj=1995306)
CPU: Vendor unknown, using generic init.
CPU: Your system may be unstable.
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU1: AuthenticAMD AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
CPU1 is up
Switched to high resolution mode on CPU 1
But I don't noticed a shorter batterylife or more cpu hotness, so I
think the second core is running at the same speed as CPU0 and
/proc/cpuinfo (and possibly other files) doesn't update correctly.
Regards,
Stefan
2007/4/8, Mircea Bardac <[email protected]>:
Hi everyone,
After reading "CPU offline but power consumption increased?" lkml thread I
wanted to test CPU on-off on my Turion 64 X2.
I found out something strange, related to the way CPU is turned off and back
on. I don't know if this is a kernel bug, but looks pretty suspicious.
**** The initial situation, both cores running at 1.6 GHz, full info displayed
**** /proc/cpuinfo
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52
stepping : 2
cpu MHz : 1600.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm
3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm
stc
bogomips : 3195.47
clflush size : 64
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52
stepping : 2
cpu MHz : 1600.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm
3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm
stc
bogomips : 3195.47
clflush size : 64
**** The initial situation, both cores running at 1.6 GHz, full info displayed
**** cpufreq-info
# cpufreq-info
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: powernow-k8
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 800 MHz - 1.60 GHz
available frequency steps: 1.60 GHz, 800 MHz
available cpufreq governors: powersave, performance
current policy: frequency should be within 800 MHz and 1.60 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 1.60 GHz (asserted by call to hardware).
analyzing CPU 1:
driver: powernow-k8
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 800 MHz - 1.60 GHz
available frequency steps: 1.60 GHz, 800 MHz
available cpufreq governors: powersave, performance
current policy: frequency should be within 800 MHz and 1.60 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 1.60 GHz (asserted by call to hardware).
**** 2nd core is shut down
# echo 0 > /sys/devices/system/cpu/cpu1/online
**** Only 2nd core is now running, at 800 MHz, half bogomips
**** /proc/cpuinfo
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm
3dnowext 3dnow up pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm
stc
bogomips : 1597.73
clflush size : 64
**** Only 2nd core is now running, at 800 MHz, half bogomips
**** cpufreq-info
# cpufreq-info
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: powernow-k8
CPUs which need to switch frequency at the same time: 0
hardware limits: 800 MHz - 1.60 GHz
available frequency steps: 1.60 GHz, 800 MHz
available cpufreq governors: powersave, performance
current policy: frequency should be within 800 MHz and 1.60 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 800 MHz (asserted by call to hardware).
**** Turning 2nd core back on
# echo 1 > /sys/devices/system/cpu/cpu1/online
**** /proc/cpuinfo shows again info about 2nd core
**** but some details are missing about 2nd core, such as "cache size"
**** (others might also be missing) - this makes me think something might not
**** be working right (cache not used maybe?)
**** Bogomips is still half (I'm not sure if this is directly proportional
**** with CPU frequency or with number of cores)
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm
3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm
stc
bogomips : 1597.73
clflush size : 64
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52
stepping : 2
cpu MHz : 1596.093
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm
3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm
stc
bogomips : 1596.01
clflush size : 64
**** cpufreq-info shows info only about 1st core
# cpufreq-info
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: powernow-k8
CPUs which need to switch frequency at the same time: 0
hardware limits: 800 MHz - 1.60 GHz
available frequency steps: 1.60 GHz, 800 MHz
available cpufreq governors: powersave, performance
current policy: frequency should be within 800 MHz and 1.60 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 800 MHz (asserted by call to hardware).
analyzing CPU 1:
no or unknown cpufreq driver is active on this CPU
**** reloading powernow-k8 driver, to check if cpufreq-info gets back working
# rmmod powernow-k8
# modprobe powernow-k8
FATAL: Error inserting powernow_k8
(/lib/modules/2.6.20-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/powernow-k8.ko):
No such device
Many thanks,
Mircea
--
http://mircea.bardac.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
