Udo van den Heuvel <[email protected]> writes:
> At the bottom I added a dmesg output of the kernel after boot.
> I more or less know that irq 20 for the DVB-S card (saa7146 (1)) is
> 'working'. I know that irq 16 for saa7146 (0) (DVB-T) is not working for
> i2c although the card does work perfectly for DVB-T reception (picture,
> low CPU load, etc) with only reception as the bottleneck.
BTW: Can you check which device # and IRQ does the card get if plugged
directly into the PCI slot on board (without the riser)?
Is it a VIA ITX board? I think I have VIA's riser card somewhere,
could check what it does.
--
Krzysztof Halasa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
