[patch/rfc 2.6.20-git] parport reports physical devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently a parport_driver can't get a handle on the device node for the
underlying parport (PNPACPI, PCI, etc).  That prevents correct placement
of sysfs child nodes, which can affect things like power management.

This patch resolves that issue for non-legacy configurations:

    * "struct parport" now has a field pointing to that device node,
      and non-legacy port drivers now initialize that device pointer:
	- parport_mfc3 (can't test or build; no Amiga + Zorro here)
	- parport_pc (and stop using only pci_device internally)
	- parport_serial
	- parport_sunbpp (can't test or build, no SPARC + SBUS here)

    * pnp now initializes device dma masks (24bits), preventing oopses
      when generic dma calls are made using pnp device nodes

    * some of the layered parport_driver code now uses that pointer:
	- i2c-parport (parent of i2c_adapter)
	- spi_butterfly (parent of spi_master, allowing cruft removal)
	- lp (creating class_device)
	- ppdev (parent of parportN device)
	- tipar (creating class_device)

Sanity tested on a PC, where PNPACPI provides the device to parport_pc,
using spi_butterfly.  But I've got to wonder about parport DMA...

There are still drivers that should be updated, like some of the input
drivers; but they won't be any worse off than they are today.  And the
legacy port drivers should, like all legacy drivers, be morphed into
proper driver model code ... but until that happens, drivers need to
be prepared for the device node to be null.

Signed-off-by: David Brownell <[email protected]>

---
 drivers/char/lp.c                |    2 +-
 drivers/char/ppdev.c             |    2 +-
 drivers/char/tipar.c             |    2 +-
 drivers/i2c/busses/i2c-parport.c |    3 ++-
 drivers/parport/parport_mfc3.c   |    1 +
 drivers/parport/parport_pc.c     |   31 +++++++++++++++++--------------
 drivers/parport/parport_serial.c |    2 +-
 drivers/parport/parport_sunbpp.c |    1 +
 drivers/pnp/core.c               |    3 +++
 drivers/spi/spi_butterfly.c      |   25 ++++++++-----------------
 include/linux/parport.h          |    8 ++++++--
 include/linux/parport_pc.h       |    3 +--
 include/linux/pnp.h              |    1 +
 13 files changed, 44 insertions(+), 40 deletions(-)

Index: g26/include/linux/parport.h
===================================================================
--- g26.orig/include/linux/parport.h	2006-10-13 15:41:24.000000000 -0700
+++ g26/include/linux/parport.h	2007-02-18 14:11:01.000000000 -0800
@@ -279,6 +279,10 @@ struct parport {
 	int dma;
 	int muxport;		/* which muxport (if any) this is */
 	int portnum;		/* which physical parallel port (not mux) */
+	struct device *dev;	/* Physical device associated with IO/DMA.
+				 * This may unfortulately be null if the
+				 * port has a legacy driver.
+				 */
 
 	struct parport *physport;
 				/* If this is a non-default mux
@@ -289,7 +293,7 @@ struct parport {
 				   following structure members are
 				   meaningless: devices, cad, muxsel,
 				   waithead, waittail, flags, pdir,
-				   ieee1284, *_lock.
+				   dev, ieee1284, *_lock.
 
 				   It this is a default mux parport, or
 				   there is no mux involved, this points to
@@ -302,7 +306,7 @@ struct parport {
 
 	struct pardevice *waithead;
 	struct pardevice *waittail;
-	
+
 	struct list_head list;
 	unsigned int flags;
 
Index: g26/include/linux/parport_pc.h
===================================================================
--- g26.orig/include/linux/parport_pc.h	2006-01-14 18:12:27.000000000 -0800
+++ g26/include/linux/parport_pc.h	2007-02-18 13:12:21.000000000 -0800
@@ -38,7 +38,6 @@ struct parport_pc_private {
 	/* buffer suitable for DMA, if DMA enabled */
 	char *dma_buf;
 	dma_addr_t dma_handle;
-	struct pci_dev *dev;
 	struct list_head list;
 	struct parport *port;
 };
@@ -232,7 +231,7 @@ extern int parport_pc_claim_resources(st
 extern struct parport *parport_pc_probe_port (unsigned long base,
 					      unsigned long base_hi,
 					      int irq, int dma,
-					      struct pci_dev *dev);
+					      struct device *dev);
 extern void parport_pc_unregister_port (struct parport *p);
 
 #endif
Index: g26/drivers/parport/parport_pc.c
===================================================================
--- g26.orig/drivers/parport/parport_pc.c	2006-12-07 23:00:32.000000000 -0800
+++ g26/drivers/parport/parport_pc.c	2007-02-18 20:43:02.000000000 -0800
@@ -620,6 +620,7 @@ static size_t parport_pc_fifo_write_bloc
 	unsigned long dmaflag;
 	size_t left = length;
 	const struct parport_pc_private *priv = port->physport->private_data;
+	struct device *dev = port->physport->dev;
 	dma_addr_t dma_addr, dma_handle;
 	size_t maxlen = 0x10000; /* max 64k per DMA transfer */
 	unsigned long start = (unsigned long) buf;
@@ -631,8 +632,8 @@ dump_parport_state ("enter fifo_write_bl
 		if ((start ^ end) & ~0xffffUL)
 			maxlen = 0x10000 - (start & 0xffff);
 
-		dma_addr = dma_handle = pci_map_single(priv->dev, (void *)buf, length,
-						       PCI_DMA_TODEVICE);
+		dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length,
+						       DMA_TO_DEVICE);
         } else {
 		/* above 16 MB we use a bounce buffer as ISA-DMA is not possible */
 		maxlen   = PAGE_SIZE;          /* sizeof(priv->dma_buf) */
@@ -728,9 +729,9 @@ dump_parport_state ("enter fifo_write_bl
 
 	/* Turn off DMA mode */
 	frob_econtrol (port, 1<<3, 0);
-	
+
 	if (dma_handle)
-		pci_unmap_single(priv->dev, dma_handle, length, PCI_DMA_TODEVICE);
+		dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE);
 
 dump_parport_state ("leave fifo_write_block_dma", port);
 	return length - left;
@@ -2146,7 +2147,7 @@ static DEFINE_SPINLOCK(ports_lock);
 struct parport *parport_pc_probe_port (unsigned long int base,
 				       unsigned long int base_hi,
 				       int irq, int dma,
-				       struct pci_dev *dev)
+				       struct device *dev)
 {
 	struct parport_pc_private *priv;
 	struct parport_operations *ops;
@@ -2180,9 +2181,10 @@ struct parport *parport_pc_probe_port (u
 	priv->fifo_depth = 0;
 	priv->dma_buf = NULL;
 	priv->dma_handle = 0;
-	priv->dev = dev;
 	INIT_LIST_HEAD(&priv->list);
 	priv->port = p;
+
+	p->dev = dev;
 	p->base_hi = base_hi;
 	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
 	p->private_data = priv;
@@ -2305,9 +2307,10 @@ struct parport *parport_pc_probe_port (u
 				p->dma = PARPORT_DMA_NONE;
 			} else {
 				priv->dma_buf =
-				  pci_alloc_consistent(priv->dev,
+				  dma_alloc_coherent(dev,
 						       PAGE_SIZE,
-						       &priv->dma_handle);
+						       &priv->dma_handle,
+						       GFP_KERNEL);
 				if (! priv->dma_buf) {
 					printk (KERN_WARNING "%s: "
 						"cannot get buffer for DMA, "
@@ -2383,7 +2386,7 @@ void parport_pc_unregister_port (struct 
 		release_region(p->base_hi, 3);
 #if defined(CONFIG_PARPORT_PC_FIFO) && defined(HAS_DMA)
 	if (priv->dma_buf)
-		pci_free_consistent(priv->dev, PAGE_SIZE,
+		dma_free_coherent(p->physport->dev, PAGE_SIZE,
 				    priv->dma_buf,
 				    priv->dma_handle);
 #endif
@@ -2489,7 +2492,7 @@ static int __devinit sio_ite_8872_probe 
 	 */
 	release_resource(base_res);
 	if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi,
-				   irq, PARPORT_DMA_NONE, NULL)) {
+				   irq, PARPORT_DMA_NONE, &pdev->dev)) {
 		printk (KERN_INFO
 			"parport_pc: ITE 8872 parallel port: io=0x%X",
 			ite8872_lpt);
@@ -2672,7 +2675,7 @@ static int __devinit sio_via_probe (stru
 	}
 
 	/* finally, do the probe with values obtained */
-	if (parport_pc_probe_port (port1, port2, irq, dma, NULL)) {
+	if (parport_pc_probe_port (port1, port2, irq, dma, &pdev->dev)) {
 		printk (KERN_INFO
 			"parport_pc: VIA parallel port: io=0x%X", port1);
 		if (irq != PARPORT_IRQ_NONE)
@@ -2970,7 +2973,7 @@ static int parport_pc_pci_probe (struct 
 			parport_pc_pci_tbl[i + last_sio].device, io_lo, io_hi);
 		data->ports[count] =
 			parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
-					       PARPORT_DMA_NONE, dev);
+					       PARPORT_DMA_NONE, &dev->dev);
 		if (data->ports[count])
 			count++;
 	}
@@ -3077,8 +3080,8 @@ static int parport_pc_pnp_probe(struct p
 	} else
 		dma = PARPORT_DMA_NONE;
 
-	printk(KERN_INFO "parport: PnPBIOS parport detected.\n");
-	if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, NULL)))
+	dev_info(&dev->dev, "reported by %s\n", dev->protocol->name);
+	if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, &dev->dev)))
 		return -ENODEV;
 
 	pnp_set_drvdata(dev,pdata);
Index: g26/drivers/parport/parport_mfc3.c
===================================================================
--- g26.orig/drivers/parport/parport_mfc3.c	2006-10-13 15:41:08.000000000 -0700
+++ g26/drivers/parport/parport_mfc3.c	2007-02-18 12:51:23.000000000 -0800
@@ -356,6 +356,7 @@ static int __init parport_mfc3_init(void
 				if (request_irq(IRQ_AMIGA_PORTS, mfc3_interrupt, IRQF_SHARED, p->name, &pp_mfc3_ops))
 					goto out_irq;
 		}
+		p->dev = &z->dev;
 
 		this_port[pias++] = p;
 		printk(KERN_INFO "%s: Multiface III port using irq\n", p->name);
Index: g26/drivers/parport/parport_sunbpp.c
===================================================================
--- g26.orig/drivers/parport/parport_sunbpp.c	2006-10-13 15:41:08.000000000 -0700
+++ g26/drivers/parport/parport_sunbpp.c	2007-02-18 12:55:50.000000000 -0800
@@ -320,6 +320,7 @@ static int __devinit init_one_port(struc
 		goto out_free_ops;
 
 	p->size = size;
+	p->dev = &sdev->ofdev.dev;
 
 	if ((err = request_irq(p->irq, parport_sunbpp_interrupt,
 			       IRQF_SHARED, p->name, p)) != 0) {
Index: g26/drivers/parport/parport_serial.c
===================================================================
--- g26.orig/drivers/parport/parport_serial.c	2006-10-05 19:43:52.000000000 -0700
+++ g26/drivers/parport/parport_serial.c	2007-02-18 12:53:07.000000000 -0800
@@ -305,7 +305,7 @@ static int __devinit parport_register (s
 		dev_dbg(&dev->dev, "PCI parallel port detected: I/O at "
 			"%#lx(%#lx)\n", io_lo, io_hi);
 		port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
-					      PARPORT_DMA_NONE, dev);
+					      PARPORT_DMA_NONE, &dev->dev);
 		if (port) {
 			priv->port[priv->num_par++] = port;
 			success = 1;
Index: g26/drivers/spi/spi_butterfly.c
===================================================================
--- g26.orig/drivers/spi/spi_butterfly.c	2007-02-18 09:13:19.000000000 -0800
+++ g26/drivers/spi/spi_butterfly.c	2007-02-18 09:20:14.000000000 -0800
@@ -20,7 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/platform_device.h>
+#include <linux/device.h>
 #include <linux/parport.h>
 
 #include <linux/sched.h>
@@ -237,24 +237,20 @@ static void butterfly_attach(struct parp
 	int			status;
 	struct butterfly	*pp;
 	struct spi_master	*master;
-	struct platform_device	*pdev;
+	struct device		*dev = p->physport->dev;
 
-	if (butterfly)
+	/* NOTE: this won't work with old legacy-style parport drivers,
+	 * which have no driver model device node.  PNPACPI or PCI ones
+	 * should however be just fine
+	 */
+	if (butterfly || !dev)
 		return;
 
 	/* REVISIT:  this just _assumes_ a butterfly is there ... no probe,
 	 * and no way to be selective about what it binds to.
 	 */
 
-	/* FIXME where should master->dev come from?
-	 * e.g. /sys/bus/pnp0/00:0b, some PCI thing, etc
-	 * setting up a platform device like this is an ugly kluge...
-	 */
-	pdev = platform_device_register_simple("butterfly", -1, NULL, 0);
-	if (IS_ERR(pdev))
-		return;
-
-	master = spi_alloc_master(&pdev->dev, sizeof *pp);
+	master = spi_alloc_master(dev, sizeof *pp);
 	if (!master) {
 		status = -ENOMEM;
 		goto done;
@@ -366,14 +362,12 @@ clean1:
 clean0:
 	(void) spi_master_put(pp->bitbang.master);
 done:
-	platform_device_unregister(pdev);
 	pr_debug("%s: butterfly probe, fail %d\n", p->name, status);
 }
 
 static void butterfly_detach(struct parport *p)
 {
 	struct butterfly	*pp;
-	struct platform_device	*pdev;
 	int			status;
 
 	/* FIXME this global is ugly ... but, how to quickly get from
@@ -386,7 +380,6 @@ static void butterfly_detach(struct parp
 	butterfly = NULL;
 
 	/* stop() unregisters child devices too */
-	pdev = to_platform_device(pp->bitbang.master->dev);
 	status = spi_bitbang_stop(&pp->bitbang);
 
 	/* turn off VCC */
@@ -397,8 +390,6 @@ static void butterfly_detach(struct parp
 	parport_unregister_device(pp->pd);
 
 	(void) spi_master_put(pp->bitbang.master);
-
-	platform_device_unregister(pdev);
 }
 
 static struct parport_driver butterfly_driver = {
Index: g26/drivers/i2c/busses/i2c-parport.c
===================================================================
--- g26.orig/drivers/i2c/busses/i2c-parport.c	2006-12-12 19:25:43.000000000 -0800
+++ g26/drivers/i2c/busses/i2c-parport.c	2007-02-18 09:13:34.000000000 -0800
@@ -143,7 +143,7 @@ static struct i2c_algo_bit_data parport_
 
 /* ----- I2c and parallel port call-back functions and structures --------- */
 
-static struct i2c_adapter parport_adapter = {
+static const struct i2c_adapter parport_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
 	.id		= I2C_HW_B_LP,
@@ -175,6 +175,7 @@ static void i2c_parport_attach (struct p
 		adapter->algo_data.getscl = NULL;
 	adapter->algo_data.data = port;
 	adapter->adapter.algo_data = &adapter->algo_data;
+	adapter->adapter.dev.parent = port->physport->dev;
 
 	if (parport_claim_or_block(adapter->pdev) < 0) {
 		printk(KERN_ERR "i2c-parport: Could not claim parallel port\n");
Index: g26/drivers/char/ppdev.c
===================================================================
--- g26.orig/drivers/char/ppdev.c	2006-12-09 17:02:09.000000000 -0800
+++ g26/drivers/char/ppdev.c	2007-02-18 13:45:40.000000000 -0800
@@ -752,7 +752,7 @@ static const struct file_operations pp_f
 
 static void pp_attach(struct parport *port)
 {
-	device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number),
+	device_create(ppdev_class, port->dev, MKDEV(PP_MAJOR, port->number),
 			"parport%d", port->number);
 }
 
Index: g26/drivers/char/lp.c
===================================================================
--- g26.orig/drivers/char/lp.c	2006-12-14 06:00:30.000000000 -0800
+++ g26/drivers/char/lp.c	2007-02-18 13:44:12.000000000 -0800
@@ -803,7 +803,7 @@ static int lp_register(int nr, struct pa
 	if (reset)
 		lp_reset(nr);
 
-	class_device_create(lp_class, NULL, MKDEV(LP_MAJOR, nr), NULL,
+	class_device_create(lp_class, NULL, MKDEV(LP_MAJOR, nr), port->dev,
 				"lp%d", nr);
 
 	printk(KERN_INFO "lp%d: using %s (%s).\n", nr, port->name, 
Index: g26/drivers/char/tipar.c
===================================================================
--- g26.orig/drivers/char/tipar.c	2006-12-09 17:02:09.000000000 -0800
+++ g26/drivers/char/tipar.c	2007-02-18 13:43:15.000000000 -0800
@@ -442,7 +442,7 @@ tipar_register(int nr, struct parport *p
 	}
 
 	class_device_create(tipar_class, NULL, MKDEV(TIPAR_MAJOR,
-			TIPAR_MINOR + nr), NULL, "par%d", nr);
+			TIPAR_MINOR + nr), port->dev, "par%d", nr);
 
 	/* Display informations */
 	pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq ==
Index: g26/include/linux/pnp.h
===================================================================
--- g26.orig/include/linux/pnp.h	2007-02-12 00:31:26.000000000 -0800
+++ g26/include/linux/pnp.h	2007-02-18 20:18:55.000000000 -0800
@@ -177,6 +177,7 @@ static inline void pnp_set_card_drvdata 
 
 struct pnp_dev {
 	struct device dev;		/* Driver Model device interface */
+	u64 dma_mask;
 	unsigned char number;		/* used as an index, must be unique */
 	int status;
 
Index: g26/drivers/pnp/core.c
===================================================================
--- g26.orig/drivers/pnp/core.c	2005-11-12 22:24:18.000000000 -0800
+++ g26/drivers/pnp/core.c	2007-02-18 20:42:17.000000000 -0800
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
+#include <linux/dma-mapping.h>
 
 #include "base.h"
 
@@ -114,6 +115,8 @@ int __pnp_add_device(struct pnp_dev *dev
 	int ret;
 	pnp_fixup_device(dev);
 	dev->dev.bus = &pnp_bus_type;
+	dev->dev.dma_mask = &dev->dma_mask;
+	dev->dma_mask = dev->dev.coherent_dma_mask = DMA_24BIT_MASK;
 	dev->dev.release = &pnp_release_device;
 	dev->status = PNP_READY;
 	spin_lock(&pnp_lock);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux