I can confirm that it works fine with 2.6.20-rc2.
Do you need me to try any other ? do you need any more info ?
2007/2/14, Nilshar <[email protected]>:
Hello,
I have an issue with latest 2.6.20 kernel..
my last kernel was a 2.6.18 and I wanted to upgrade to a 2.6.20, I
copied .config and did a make menuconfig, then save/quit. I compiled
new kernel, all went fine.
I installed it and at boot time, I had a hang just after "Freeing
unused kernel memory" where INIT is supposed to start.
After searching the web, I found that it is usually the case when
wrong process type is configured.. I verified that, but all was fine
there.
After 10ish compiled kernel, I found that it is when I select highmem64.
Diff between working and non working kernel :
181,182c181,182
< # CONFIG_HIGHMEM4G is not set
< CONFIG_HIGHMEM64G=y
---
> CONFIG_HIGHMEM4G=y
> # CONFIG_HIGHMEM64G is not set
185d184
< CONFIG_X86_PAE=y
191c190
< CONFIG_RESOURCES_64BIT=y
---
> # CONFIG_RESOURCES_64BIT is not set
(I just witching highmem 4G and highmem64g).
I'll attach the full .config.
it used to work fine with highmem64g with a kernel 2.6.18 and 2.6.19
(I'm sure it was ok with .20-rc2 but I'll double check that).
Is this a bug ? or something I did wrong ?
Oh, I probably should add that this hang doesn't occur on all
hardware, but it happen on Dell PE 850 at least.
If you need additional informations, just ask :)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
