RE: AHCI - remove probing of ata2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > This looks like the problems that hopefully the patches 
> from Tejun and
> > from Mark Lord cured (the delay after reset and the task file clear)
> 
> Any chance I can find this patch(es) and try them ?
>  
> > > Also, I've seen a :
> > > 
> > > ata1: Spurious SDB FIS during NCQ issue=0x0 SAct=0x7ff8001f
> > > FIS=004040a1:00040000
> > > 
> > > What's this ? Is it really bad or just a warning ???
> > 
> > It's one Tejun stuck logging in for in order to investigate further.
> 
> OK, will wait a little bit ;)
> 

In the meantime, I've been trying 2.6.20-rc7.
Things are not better, except that the ata2 probing failing results in
no /dev/sdd being allocated, thus it changes all the naming afterwards.

So, 2.6.20-rc7 results are :
 - ata2 probing still very long and delaying boot a lot,
 - Jmicron PATA still not working, and doesn't even detect the DVD-ROM on
   the port.

Guys, should you have any patch that you'd like me to test, feel free to
send, I'll do that more than happily.

Regards,
Paul

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux