Re: 2.6.20 PCI Cannot allocate resource region 2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/7/07, Luming Yu <[email protected]> wrote:
> none on the card, a flash or a firmware .. it has a 24c02 EEPROM for
> vendor information, that's all

Ok, sounds like windows driver can fix the broken EEPROM  on you card.
Otherwise, I can not explain how windows driver can fix the problem for linux.


I have the windows driver sources for the device, it does _not_ write
anything to the EEPROM under any circumstance.

moreover the EEPROM is write protected in hardware by a jumper. So no
application can write to it, AFAICS

Anyway, this issue is NOT linux problem. right?


I am not very sure about that.

really i am thinking this way .. On booting up windows, it could have
changed some BIOS stuff (written something to NVRAM or something like
that ?).. that's the only possibility that i can see here.

really lost on this one.

regards,
manu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux