Re: Nvidia cable detection problems (was [PATCH] amd74xx: don't configure udma mode higher than BIOS did)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> Since we are already using UDMA mode set by BIOS to determine if 80c cable
> is present so why not also use it to determine if the 40c cable is present?
> 
> I mean just ignoring AMD_CABLE_DETECT register for NVIDIA devices.
> 
> 2-lines change and we wouldn't have to deal with ACPI at ell.

And as I explained earlier you get false values. The existing hack is
dodgy as well and breaks on suspend/resume then loading the driver for
one. It's probably the best that can be done without ACPI but the ACPI
_GTM/_STM methods are pretty clean so its not hard to use them. You need
them for full suspend/resume support anyway.

Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux