Hey guys-
Have a Precision workstation with SATA hard drive and SATA CD-ROM. If I
load Fedora Core 5 with a stock 2.6.15 kernel, life is good.
However, I need to use 2.6.16.16. Once I build and install this kernel,
my CD-ROM drive is gone. There is a log entry in dmesg that says "ATAPI
not support. Ignoring."
If I go into the BIOS and set the SATA operations to Legacy/Compatible
then everything is fine. I've rebuilt this kernel about 100 times
trying everything I can think of.
When I have SATA set to legacy, the HDD and CD are detected as /dev/hd*
and when they're set to SATA Normal operation the HDD is detected as
/dev/sda. If I boot my old 2.6.15 (stock install) kernel then the CD is
found as /dev/sdc.
I've even tried taking the installation default configuration file for
the 2.6.15 kernel and just wholesale copying it into my 2.6.16.16 kernel
and build that way but still no go.
What am I missing to get the 2.6.16.16 kernel to see a SATA CD-ROM drive
in normal, non-legacy move?
-brian
Brian D. McGrew { [email protected] ||
[email protected] }
--
> Do not read this email while waxing that cat!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
