Re: fix typo in geode_configre()@cyrix.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 17 Jan 2007 02:12:42 +0900 (JST)
takada <[email protected]> wrote:

> From: [email protected] (Lennart Sorensen)
> Subject: Re: fix typo in geode_configre()@cyrix.c
> Date: Tue, 16 Jan 2007 11:50:07 -0500
> 
> > On Wed, Jan 17, 2007 at 01:38:35AM +0900, takada wrote:
> > > You are right. I agree to your comment. These variables are needless.
> > > I made a patch again.
> > 
> > Of course there are also lots of "magic numbers" around, but I must
> > admit I don't personally really feel like going through the data sheet
> > and naming all of them.
> 
> Me too.
> 
> > 
> > > diff -Narup linux-2.6.19.orig/arch/i386/kernel/cpu/cyrix.c linux-2.6.19/arch/i386/kernel/cpu/cyrix.c
> > > --- linux-2.6.19.orig/arch/i386/kernel/cpu/cyrix.c	2006-11-30 06:57:37.000000000 +0900
> > > +++ linux-2.6.19/arch/i386/kernel/cpu/cyrix.c	2007-01-16 19:55:05.000000000 +0900
> > > @@ -161,19 +161,15 @@ static void __cpuinit set_cx86_inc(void)
> > >  static void __cpuinit geode_configure(void)
> > >  {
> > >  	unsigned long flags;
> > > -	u8 ccr3, ccr4;
> > >  	local_irq_save(flags);
> > >  
> > >  	/* Suspend on halt power saving and enable #SUSP pin */
> > >  	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
> > >  
> > > -	ccr3 = getCx86(CX86_CCR3);
> > > -	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* Enable */
> > > +	setCx86(CX86_CCR3, (getCx86(CX86_CCR3) & 0x0f) | 0x10);	/* Enable */
> > >  	
> > > -	ccr4 = getCx86(CX86_CCR4);
> > > -	ccr4 |= 0x38;		/* FPU fast, DTE cache, Mem bypass */
> > > -	
> > > -	setCx86(CX86_CCR3, ccr3);
> > > +	/* FPU fast, DTE cache, Mem bypass */
> > > +	setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x30);
> > 	
> > Why did that change from 0x38 to 0x30?
> 
> ah... I made mistake. My eye is tired.
> Correctry, 0x38.
> 

I'm lost.  Could someone please prepare a complete new patch against the
latest -linus tree?

Thanks.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux