[PATCH 2/4] atl1: Header files for Attansic L1 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jay Cliburn <[email protected]>
From: Chris Snook <[email protected]>

This patch contains the header files needed by the Attansic L1 gigabit
ethernet adapter driver.

Signed-off-by: Jay Cliburn <[email protected]>
Signed-off-by: Chris Snook <[email protected]>
---

 atl1.h    |  288 ++++++++++++++++++
 atl1_hw.h |  965 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 1253 insertions(+)

diff --git a/drivers/net/atl1/atl1.h b/drivers/net/atl1/atl1.h
new file mode 100644
index 0000000..1d13e8f
--- /dev/null
+++ b/drivers/net/atl1/atl1.h
@@ -0,0 +1,288 @@
+/**
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 Chris Snook <[email protected]>
+ * Copyright(c) 2006 Jay Cliburn <[email protected]>
+ * 
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ * 
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ **/
+
+#ifndef _ATL1_H_
+#define _ATL1_H_
+
+#include <linux/types.h>
+#include <linux/if_vlan.h>
+#include <linux/mii.h>
+
+#include "atl1_hw.h"
+
+/* function prototypes needed by multiple files */
+s32 atl1_up(struct atl1_adapter *adapter);
+void atl1_down(struct atl1_adapter *adapter);
+int atl1_reset(struct atl1_adapter *adapter);
+s32 atl1_setup_ring_resources(struct atl1_adapter *adapter);
+void atl1_free_ring_resources(struct atl1_adapter *adapter);
+
+struct atl1_adapter;
+
+#define ATL1_MAX_INTR		3
+
+#define ATL1_DEFAULT_TPD	256
+#define ATL1_MAX_TPD		1023
+#define ATL1_MIN_TPD		64
+#define ATL1_DEFAULT_RFD	512
+#define ATL1_MIN_RFD		128
+#define ATL1_MAX_RFD		2047
+
+#define ATL1_GET_DESC(R, i, type)	(&(((type *)((R)->desc))[i]))
+#define ATL1_RFD_DESC(R, i)	ATL1_GET_DESC(R, i, struct rx_free_desc)
+#define ATL1_TPD_DESC(R, i)	ATL1_GET_DESC(R, i, struct tx_packet_desc)
+#define ATL1_RRD_DESC(R, i)	ATL1_GET_DESC(R, i, struct rx_return_desc)
+
+/**
+ * Some workarounds require millisecond delays and are run during interrupt
+ * context.  Most notably, when establishing link, the phy may need tweaking
+ * but cannot process phy register reads/writes faster than millisecond
+ * intervals...and we establish link due to a "link status change" interrupt.
+ **/
+
+/**
+ * wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ **/
+struct atl1_buffer {
+	struct sk_buff *skb;
+	u16 length;
+	u16 alloced;
+	dma_addr_t dma;
+};
+
+#define MAX_TX_BUF_LEN		0x3000	/* 12KB */
+
+struct atl1_tpd_ring {
+	void *desc;		/* pointer to the descriptor ring memory */
+	dma_addr_t dma;		/* physical adress of the descriptor ring */
+	u16 size;		/* length of descriptor ring in bytes */
+	u16 count;		/* number of descriptors in the ring */
+
+	u16 hw_idx;		/* hardware index */
+	atomic_t next_to_clean;
+	atomic_t next_to_use;
+	struct atl1_buffer *buffer_info;
+};
+
+struct atl1_rfd_ring {
+	void *desc;
+	dma_addr_t dma;
+	u16 size;
+	u16 count;
+	atomic_t next_to_use;
+	u16 next_to_clean;
+	struct atl1_buffer *buffer_info;
+};
+
+struct atl1_rrd_ring {
+	void *desc;
+	dma_addr_t dma;
+	unsigned int size;
+	u16 count;
+	u16 next_to_use;
+	atomic_t next_to_clean;
+};
+
+struct atl1_ring_header {
+	/* pointer to the descriptor ring memory */
+	void *desc;
+	/* physical adress of the descriptor ring */
+	dma_addr_t dma;
+	/* length of descriptor ring in bytes */
+	unsigned int size;
+};
+
+struct atl1_cmb {
+	struct coals_msg_block *cmb;
+	dma_addr_t dma;
+};
+
+struct atl1_smb {
+	struct stats_msg_block *smb;
+	dma_addr_t dma;
+};
+
+/* Statistics counters */
+struct atl1_sft_stats {
+	u64 rx_packets;
+	u64 tx_packets;
+	u64 rx_bytes;
+	u64 tx_bytes;
+	u64 multicast;
+	u64 collisions;
+	u64 rx_errors;
+	u64 rx_length_errors;
+	u64 rx_crc_errors;
+	u64 rx_frame_errors;
+	u64 rx_fifo_errors;
+	u64 rx_missed_errors;
+	u64 tx_errors;
+	u64 tx_fifo_errors;
+	u64 tx_aborted_errors;
+	u64 tx_window_errors;
+	u64 tx_carrier_errors;
+
+	u64 tx_pause;		/* The number of Pause packet transmitted. */
+	u64 excecol;		/* The number of transmit packets aborted due to excessive collisions. */
+	u64 deffer;		/* The number of packets transmitted that is deferred. */
+	u64 scc;		/* The number of packets subsequently transmitted successfully with a single prior collision. */
+	u64 mcc;		/* The number of packets subsequently transmitted successfully with multiple prior collisions. */
+	u64 latecol;		/* The number of packets transmitted with late collisions. */
+	u64 tx_underun;		/* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+	u64 tx_trunc;		/* The number of transmit packets truncated due to size exceeding MTU, regardless if it is truncated by Selene or not.
+				 * (The name is not really reflects the meaning in this case here.) */
+	u64 rx_pause;		/* The number of Pause packet received. */
+	u64 rx_rrd_ov;
+	u64 rx_trunc;
+};
+
+/* board specific private data structure */
+#define ATL1_REGS_LEN	8
+
+/* Structure containing variables used by the shared code */
+struct atl1_hw {
+	u8 __iomem *hw_addr;
+	struct atl1_adapter *back;
+
+	enum atl1_dma_order dma_ord;
+	enum atl1_dma_rcb rcb_value;
+	enum atl1_dma_req_block dmar_block;
+	enum atl1_dma_req_block dmaw_block;
+
+	u8 preamble_len;
+	u8 max_retry;		/* Retransmission maximum , afterwards the packet will be discarded. */
+	u8 jam_ipg;		/* IPG to start JAM for collision based flow control in half-duplex mode. In unit of 8-bit time. */
+	u8 ipgt;		/* Desired back to back inter-packet gap. The default is 96-bit time. */
+	u8 min_ifg;		/* Minimum number of IFG to enforce in between RX frames. Frame gap below such IFP is dropped. */
+	u8 ipgr1;		/* 64bit Carrier-Sense window */
+	u8 ipgr2;		/* 96-bit IPG window */
+
+	u8 tpd_burst;		/* Number of TPD to prefetch in a cache-aligned burst. Each TPD is 16-byte in length. */
+	u8 rfd_burst;		/* Number of RFD to prefetch in a cache-aligned burst. Each RFD is 12-byte in length. */
+	u8 rfd_fetch_gap;
+	u8 rrd_burst;		/* Threshold of number of RRDs can be retired in a burst. Each RRD is 16-byte in length. */
+	u8 tpd_fetch_th;
+	u8 tpd_fetch_gap;
+	u16 tx_jumbo_task_th;
+	u16 txf_burst;		/* Number of data byte to read in a cache-aligned burst. Each SRAM entry is 8-byte in length. */
+	u16 rx_jumbo_th;	/* Jumbo packet size for non-VLAN packet. VLAN packet should add 4-byte */
+	u16 rx_jumbo_lkah;
+	u16 rrd_ret_timer;	/* RRD retirement timer. Decrement by 1 after every 512ns passes. */
+	u16 lcol;		/* Collision Window */
+
+	u16 cmb_tpd;
+	u16 cmb_rrd;
+	u16 cmb_rx_timer;
+	u16 cmb_tx_timer;
+	u32 smb_timer;
+	u16 media_type;
+	u16 autoneg_advertised;
+	u16 pci_cmd_word;
+
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg;
+
+	u32 mem_rang;
+	u32 txcw;
+	u32 max_frame_size;
+	u32 min_frame_size;
+	u32 mc_filter_type;
+	u32 num_mc_addrs;
+	u32 collision_delta;
+	u32 tx_packet_delta;
+	u16 phy_spd_default;
+
+	u16 dev_rev;
+	u8 revision_id;
+
+	/* spi flash */
+	u8 flash_vendor;
+
+	u8 dma_fairness;
+	u8 mac_addr[NODE_ADDRESS_SIZE];
+	u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+
+	/* bool phy_preamble_sup; */
+	bool phy_configured;
+};
+
+struct atl1_adapter {
+	/* OS defined structs */
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+	struct net_device_stats net_stats;
+	struct atl1_sft_stats soft_stats;
+
+	struct vlan_group *vlgrp;
+	u32 rx_buffer_len;
+	u32 wol;
+	u16 link_speed;
+	u16 link_duplex;
+	spinlock_t lock;
+	atomic_t irq_sem;
+	struct work_struct tx_timeout_task;
+	struct work_struct link_chg_task;
+	struct work_struct pcie_dma_to_rst_task;
+	struct timer_list watchdog_timer;
+	struct timer_list phy_config_timer;
+	bool phy_timer_pending;
+
+	bool mac_disabled;
+
+	/* All descriptor rings' memory */
+	struct atl1_ring_header ring_header;
+
+	/* TX */
+	struct atl1_tpd_ring tpd_ring;
+	spinlock_t mb_lock;
+
+	/* RX */
+	struct atl1_rfd_ring rfd_ring;
+	struct atl1_rrd_ring rrd_ring;
+	u64 hw_csum_err;
+	u64 hw_csum_good;
+
+	u32 gorcl;
+	u64 gorcl_old;
+
+	/* Interrupt Moderator timer ( 2us resolution) */
+	u16 imt;
+	/* Interrupt Clear timer (2us resolution) */
+	u16 ict;
+
+	/* MII interface info */
+	struct mii_if_info mii;
+
+	/* structs defined in atl1_hw.h */
+	u32 bd_number;		/* board number */
+	bool pci_using_64;
+	struct atl1_hw hw;
+	struct atl1_smb smb;
+	struct atl1_cmb cmb;
+
+	int enable_msi;
+	u32 pci_state[16];
+};
+
+#endif	/* _ATL1_H_ */
diff --git a/drivers/net/atl1/atl1_hw.h b/drivers/net/atl1/atl1_hw.h
new file mode 100644
index 0000000..0450b77
--- /dev/null
+++ b/drivers/net/atl1/atl1_hw.h
@@ -0,0 +1,965 @@
+/**
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 Chris Snook <[email protected]>
+ * Copyright(c) 2006 Jay Cliburn <[email protected]>
+ * 
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ * 
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ * 
+ * There are a lot of defines in here that are unused and/or have cryptic 
+ * names.  Please leave them alone, as they're the closest thing we have 
+ * to a spec from Attansic at present. *ahem* -- CHS
+ **/
+
+#ifndef _ATL1_HW_H_
+#define _ATL1_HW_H_
+
+struct atl1_adapter;
+struct atl1_hw;
+
+/* function prototypes needed by multiple files */
+s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw);
+s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data);
+s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 * speed, u16 * duplex);
+s32 atl1_read_mac_addr(struct atl1_hw *hw);
+s32 atl1_init_hw(struct atl1_hw *hw);
+s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 * speed, u16 * duplex);
+s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex);
+u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 * mc_addr);
+void atl1_hash_set(struct atl1_hw *hw, u32 hash_value);
+s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 * phy_data);
+void atl1_set_mac_addr(struct atl1_hw *hw);
+s32 atl1_phy_enter_power_saving(struct atl1_hw *hw);
+s32 atl1_reset_hw(struct atl1_hw *hw);
+void atl1_check_options(struct atl1_adapter *adapter);
+
+/* register definitions */
+#define REG_PCIE_CAP_LIST			0x58
+
+#define REG_VPD_CAP				0x6C
+#define VPD_CAP_ID_MASK				0xff
+#define VPD_CAP_ID_SHIFT			0
+#define VPD_CAP_NEXT_PTR_MASK			0xFF
+#define VPD_CAP_NEXT_PTR_SHIFT			8
+#define VPD_CAP_VPD_ADDR_MASK			0x7FFF
+#define VPD_CAP_VPD_ADDR_SHIFT			16
+#define VPD_CAP_VPD_FLAG			0x80000000
+
+#define REG_VPD_DATA				0x70
+
+#define REG_SPI_FLASH_CTRL			0x200
+#define SPI_FLASH_CTRL_STS_NON_RDY		0x1
+#define SPI_FLASH_CTRL_STS_WEN			0x2
+#define SPI_FLASH_CTRL_STS_WPEN			0x80
+#define SPI_FLASH_CTRL_DEV_STS_MASK		0xFF
+#define SPI_FLASH_CTRL_DEV_STS_SHIFT		0
+#define SPI_FLASH_CTRL_INS_MASK			0x7
+#define SPI_FLASH_CTRL_INS_SHIFT		8
+#define SPI_FLASH_CTRL_START			0x800
+#define SPI_FLASH_CTRL_EN_VPD			0x2000
+#define SPI_FLASH_CTRL_LDSTART			0x8000
+#define SPI_FLASH_CTRL_CS_HI_MASK		0x3
+#define SPI_FLASH_CTRL_CS_HI_SHIFT		16
+#define SPI_FLASH_CTRL_CS_HOLD_MASK		0x3
+#define SPI_FLASH_CTRL_CS_HOLD_SHIFT		18
+#define SPI_FLASH_CTRL_CLK_LO_MASK		0x3
+#define SPI_FLASH_CTRL_CLK_LO_SHIFT		20
+#define SPI_FLASH_CTRL_CLK_HI_MASK		0x3
+#define SPI_FLASH_CTRL_CLK_HI_SHIFT		22
+#define SPI_FLASH_CTRL_CS_SETUP_MASK		0x3
+#define SPI_FLASH_CTRL_CS_SETUP_SHIFT		24
+#define SPI_FLASH_CTRL_EROM_PGSZ_MASK		0x3
+#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT		26
+#define SPI_FLASH_CTRL_WAIT_READY		0x10000000
+
+#define REG_SPI_ADDR				0x204
+
+#define REG_SPI_DATA				0x208
+
+#define REG_SPI_FLASH_CONFIG			0x20C
+#define SPI_FLASH_CONFIG_LD_ADDR_MASK		0xFFFFFF
+#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT		0
+#define SPI_FLASH_CONFIG_VPD_ADDR_MASK		0x3
+#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT		24
+#define SPI_FLASH_CONFIG_LD_EXIST		0x4000000
+
+#define REG_SPI_FLASH_OP_PROGRAM		0x210
+#define REG_SPI_FLASH_OP_SC_ERASE		0x211
+#define REG_SPI_FLASH_OP_CHIP_ERASE		0x212
+#define REG_SPI_FLASH_OP_RDID			0x213
+#define REG_SPI_FLASH_OP_WREN			0x214
+#define REG_SPI_FLASH_OP_RDSR			0x215
+#define REG_SPI_FLASH_OP_WRSR			0x216
+#define REG_SPI_FLASH_OP_READ			0x217
+
+#define REG_TWSI_CTRL				0x218
+#define TWSI_CTRL_LD_OFFSET_MASK		0xFF
+#define TWSI_CTRL_LD_OFFSET_SHIFT		0
+#define TWSI_CTRL_LD_SLV_ADDR_MASK		0x7
+#define TWSI_CTRL_LD_SLV_ADDR_SHIFT		8
+#define TWSI_CTRL_SW_LDSTART			0x800
+#define TWSI_CTRL_HW_LDSTART			0x1000
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK		0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT		15
+#define TWSI_CTRL_LD_EXIST			0x400000
+#define TWSI_CTRL_READ_FREQ_SEL_MASK		0x3
+#define TWSI_CTRL_READ_FREQ_SEL_SHIFT		23
+#define TWSI_CTRL_FREQ_SEL_100K			0
+#define TWSI_CTRL_FREQ_SEL_200K			1
+#define TWSI_CTRL_FREQ_SEL_300K			2
+#define TWSI_CTRL_FREQ_SEL_400K			3
+#define TWSI_CTRL_SMB_SLV_ADDR
+#define TWSI_CTRL_WRITE_FREQ_SEL_MASK		0x3
+#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT		24
+
+#define REG_PCIE_DEV_MISC_CTRL			0x21C
+#define PCIE_DEV_MISC_CTRL_EXT_PIPE		0x2
+#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS		0x1
+#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST		0x4
+#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN	0x8
+#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN	0x10
+
+/* Selene Master Control Register */
+#define REG_MASTER_CTRL				0x1400
+#define MASTER_CTRL_SOFT_RST			0x1
+#define MASTER_CTRL_MTIMER_EN			0x2
+#define MASTER_CTRL_ITIMER_EN			0x4
+#define MASTER_CTRL_MANUAL_INT			0x8
+#define MASTER_CTRL_REV_NUM_SHIFT		16
+#define MASTER_CTRL_REV_NUM_MASK		0xff
+#define MASTER_CTRL_DEV_ID_SHIFT		24
+#define MASTER_CTRL_DEV_ID_MASK			0xff
+
+/* Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT			0x1404
+
+/* IRQ ModeratorTimer Initial Value Register */
+#define REG_IRQ_MODU_TIMER_INIT			0x1408
+
+#define REG_GPHY_ENABLE				0x140C
+
+/* IRQ Anti-Lost Timer Initial Value Register */
+#define REG_CMBDISDMA_TIMER			0x140E
+
+/* Block IDLE Status Register */
+#define REG_IDLE_STATUS				0x1410
+#define IDLE_STATUS_RXMAC			1
+#define IDLE_STATUS_TXMAC			2
+#define IDLE_STATUS_RXQ				4
+#define IDLE_STATUS_TXQ				8
+#define IDLE_STATUS_DMAR			0x10
+#define IDLE_STATUS_DMAW			0x20
+#define IDLE_STATUS_SMB				0x40
+#define IDLE_STATUS_CMB				0x80
+
+/* MDIO Control Register */
+#define REG_MDIO_CTRL				0x1414
+#define MDIO_DATA_MASK				0xffff
+#define MDIO_DATA_SHIFT				0
+#define MDIO_REG_ADDR_MASK			0x1f
+#define MDIO_REG_ADDR_SHIFT			16
+#define MDIO_RW					0x200000
+#define MDIO_SUP_PREAMBLE			0x400000
+#define MDIO_START				0x800000
+#define MDIO_CLK_SEL_SHIFT			24
+#define MDIO_CLK_25_4				0
+#define MDIO_CLK_25_6				2
+#define MDIO_CLK_25_8				3
+#define MDIO_CLK_25_10				4
+#define MDIO_CLK_25_14				5
+#define MDIO_CLK_25_20				6
+#define MDIO_CLK_25_28				7
+#define MDIO_BUSY				0x8000000
+#define MDIO_WAIT_TIMES				30
+
+/* MII PHY Status Register */
+#define REG_PHY_STATUS				0x1418
+
+/* BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL				0x141c
+#define BIST0_NOW				0x1
+#define BIST0_SRAM_FAIL				0x2
+#define BIST0_FUSE_FLAG				0x4
+#define REG_BIST1_CTRL				0x1420
+#define BIST1_NOW				0x1
+#define BIST1_SRAM_FAIL				0x2
+#define BIST1_FUSE_FLAG				0x4
+
+/* MAC Control Register */
+#define REG_MAC_CTRL				0x1480
+#define MAC_CTRL_TX_EN				1
+#define MAC_CTRL_RX_EN				2
+#define MAC_CTRL_TX_FLOW			4
+#define MAC_CTRL_RX_FLOW			8
+#define MAC_CTRL_LOOPBACK			0x10
+#define MAC_CTRL_DUPLX				0x20
+#define MAC_CTRL_ADD_CRC			0x40
+#define MAC_CTRL_PAD				0x80
+#define MAC_CTRL_LENCHK				0x100
+#define MAC_CTRL_HUGE_EN			0x200
+#define MAC_CTRL_PRMLEN_SHIFT			10
+#define MAC_CTRL_PRMLEN_MASK			0xf
+#define MAC_CTRL_RMV_VLAN			0x4000
+#define MAC_CTRL_PROMIS_EN			0x8000
+#define MAC_CTRL_TX_PAUSE			0x10000
+#define MAC_CTRL_SCNT				0x20000
+#define MAC_CTRL_SRST_TX			0x40000
+#define MAC_CTRL_TX_SIMURST			0x80000
+#define MAC_CTRL_SPEED_SHIFT			20
+#define MAC_CTRL_SPEED_MASK			0x300000
+#define MAC_CTRL_SPEED_1000			2
+#define MAC_CTRL_SPEED_10_100			1
+#define MAC_CTRL_DBG_TX_BKPRESURE		0x400000
+#define MAC_CTRL_TX_HUGE			0x800000
+#define MAC_CTRL_RX_CHKSUM_EN			0x1000000
+#define MAC_CTRL_MC_ALL_EN			0x2000000
+#define MAC_CTRL_BC_EN				0x4000000
+#define MAC_CTRL_DBG				0x8000000
+
+/* MAC IPG/IFG Control Register */
+#define REG_MAC_IPG_IFG				0x1484
+#define MAC_IPG_IFG_IPGT_SHIFT			0
+#define MAC_IPG_IFG_IPGT_MASK			0x7f
+#define MAC_IPG_IFG_MIFG_SHIFT			8
+#define MAC_IPG_IFG_MIFG_MASK			0xff
+#define MAC_IPG_IFG_IPGR1_SHIFT			16
+#define MAC_IPG_IFG_IPGR1_MASK			0x7f
+#define MAC_IPG_IFG_IPGR2_SHIFT			24
+#define MAC_IPG_IFG_IPGR2_MASK			0x7f
+
+/* MAC STATION ADDRESS */
+#define REG_MAC_STA_ADDR			0x1488
+
+/* Hash table for multicast address */
+#define REG_RX_HASH_TABLE			0x1490
+
+/* MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL			0x1498
+#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT		0
+#define MAC_HALF_DUPLX_CTRL_LCOL_MASK		0x3ff
+#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT		12
+#define MAC_HALF_DUPLX_CTRL_RETRY_MASK		0xf
+#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN		0x10000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_C		0x20000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_P		0x40000
+#define MAC_HALF_DUPLX_CTRL_ABEBE		0x80000
+#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT		20
+#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK		0xf
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT	24
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK		0xf
+
+/* Maximum Frame Length Control Register */
+#define REG_MTU					0x149c
+
+/* Wake-On-Lan control register */
+#define REG_WOL_CTRL				0x14a0
+#define WOL_PATTERN_EN				0x00000001
+#define WOL_PATTERN_PME_EN			0x00000002
+#define WOL_MAGIC_EN				0x00000004
+#define WOL_MAGIC_PME_EN			0x00000008
+#define WOL_LINK_CHG_EN				0x00000010
+#define WOL_LINK_CHG_PME_EN			0x00000020
+#define WOL_PATTERN_ST				0x00000100
+#define WOL_MAGIC_ST				0x00000200
+#define WOL_LINKCHG_ST				0x00000400
+#define WOL_CLK_SWITCH_EN			0x00008000
+#define WOL_PT0_EN				0x00010000
+#define WOL_PT1_EN				0x00020000
+#define WOL_PT2_EN				0x00040000
+#define WOL_PT3_EN				0x00080000
+#define WOL_PT4_EN				0x00100000
+#define WOL_PT5_EN				0x00200000
+#define WOL_PT6_EN				0x00400000
+
+/* WOL Length ( 2 DWORD ) */
+#define REG_WOL_PATTERN_LEN			0x14a4
+#define WOL_PT_LEN_MASK				0x7f
+#define WOL_PT0_LEN_SHIFT			0
+#define WOL_PT1_LEN_SHIFT			8
+#define WOL_PT2_LEN_SHIFT			16
+#define WOL_PT3_LEN_SHIFT			24
+#define WOL_PT4_LEN_SHIFT			0
+#define WOL_PT5_LEN_SHIFT			8
+#define WOL_PT6_LEN_SHIFT			16
+
+/* Internal SRAM Partition Register */
+#define REG_SRAM_RFD_ADDR			0x1500
+#define REG_SRAM_RFD_LEN			(REG_SRAM_RFD_ADDR+ 4)
+#define REG_SRAM_RRD_ADDR			(REG_SRAM_RFD_ADDR+ 8)
+#define REG_SRAM_RRD_LEN			(REG_SRAM_RFD_ADDR+12)
+#define REG_SRAM_TPD_ADDR			(REG_SRAM_RFD_ADDR+16)
+#define REG_SRAM_TPD_LEN			(REG_SRAM_RFD_ADDR+20)
+#define REG_SRAM_TRD_ADDR			(REG_SRAM_RFD_ADDR+24)
+#define REG_SRAM_TRD_LEN			(REG_SRAM_RFD_ADDR+28)
+#define REG_SRAM_RXF_ADDR			(REG_SRAM_RFD_ADDR+32)
+#define REG_SRAM_RXF_LEN			(REG_SRAM_RFD_ADDR+36)
+#define REG_SRAM_TXF_ADDR			(REG_SRAM_RFD_ADDR+40)
+#define REG_SRAM_TXF_LEN			(REG_SRAM_RFD_ADDR+44)
+#define REG_SRAM_TCPH_PATH_ADDR			(REG_SRAM_RFD_ADDR+48)
+#define SRAM_TCPH_ADDR_MASK			0x0fff
+#define SRAM_TCPH_ADDR_SHIFT			0
+#define SRAM_PATH_ADDR_MASK			0x0fff
+#define SRAM_PATH_ADDR_SHIFT			16
+
+/* Load Ptr Register */
+#define REG_LOAD_PTR				(REG_SRAM_RFD_ADDR+52)
+
+/* Descriptor Control register */
+#define REG_DESC_BASE_ADDR_HI			0x1540
+#define REG_DESC_RFD_ADDR_LO			(REG_DESC_BASE_ADDR_HI+4)
+#define REG_DESC_RRD_ADDR_LO			(REG_DESC_BASE_ADDR_HI+8)
+#define REG_DESC_TPD_ADDR_LO			(REG_DESC_BASE_ADDR_HI+12)
+#define REG_DESC_CMB_ADDR_LO			(REG_DESC_BASE_ADDR_HI+16)
+#define REG_DESC_SMB_ADDR_LO			(REG_DESC_BASE_ADDR_HI+20)
+#define REG_DESC_RFD_RRD_RING_SIZE		(REG_DESC_BASE_ADDR_HI+24)
+#define DESC_RFD_RING_SIZE_MASK			0x7ff
+#define DESC_RFD_RING_SIZE_SHIFT		0
+#define DESC_RRD_RING_SIZE_MASK			0x7ff
+#define DESC_RRD_RING_SIZE_SHIFT		16
+#define REG_DESC_TPD_RING_SIZE			(REG_DESC_BASE_ADDR_HI+28)
+#define DESC_TPD_RING_SIZE_MASK			0x3ff
+#define DESC_TPD_RING_SIZE_SHIFT		0
+
+/* TXQ Control Register */
+#define REG_TXQ_CTRL				0x1580
+#define TXQ_CTRL_TPD_BURST_NUM_SHIFT		0
+#define TXQ_CTRL_TPD_BURST_NUM_MASK		0x1f
+#define TXQ_CTRL_EN				0x20
+#define TXQ_CTRL_ENH_MODE			0x40
+#define TXQ_CTRL_TPD_FETCH_TH_SHIFT		8
+#define TXQ_CTRL_TPD_FETCH_TH_MASK		0x3f
+#define TXQ_CTRL_TXF_BURST_NUM_SHIFT		16
+#define TXQ_CTRL_TXF_BURST_NUM_MASK		0xffff
+
+/* Jumbo packet Threshold for task offload */
+#define REG_TX_JUMBO_TASK_TH_TPD_IPG		0x1584
+#define TX_JUMBO_TASK_TH_MASK			0x7ff
+#define TX_JUMBO_TASK_TH_SHIFT			0
+#define TX_TPD_MIN_IPG_MASK			0x1f
+#define TX_TPD_MIN_IPG_SHIFT			16
+
+/* RXQ Control Register */
+#define REG_RXQ_CTRL				0x15a0
+#define RXQ_CTRL_RFD_BURST_NUM_SHIFT		0
+#define RXQ_CTRL_RFD_BURST_NUM_MASK		0xff
+#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT		8
+#define RXQ_CTRL_RRD_BURST_THRESH_MASK		0xff
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT		16
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK		0x1f
+#define RXQ_CTRL_CUT_THRU_EN			0x40000000
+#define RXQ_CTRL_EN				0x80000000
+
+/* Rx jumbo packet threshold and rrd  retirement timer */
+#define REG_RXQ_JMBOSZ_RRDTIM			(REG_RXQ_CTRL+ 4)
+#define RXQ_JMBOSZ_TH_MASK			0x7ff
+#define RXQ_JMBOSZ_TH_SHIFT			0
+#define RXQ_JMBO_LKAH_MASK			0xf
+#define RXQ_JMBO_LKAH_SHIFT			11
+#define RXQ_RRD_TIMER_MASK			0xffff
+#define RXQ_RRD_TIMER_SHIFT			16
+
+/* RFD flow control register */
+#define REG_RXQ_RXF_PAUSE_THRESH		(REG_RXQ_CTRL+ 8)
+#define RXQ_RXF_PAUSE_TH_HI_SHIFT		16
+#define RXQ_RXF_PAUSE_TH_HI_MASK		0xfff
+#define RXQ_RXF_PAUSE_TH_LO_SHIFT		0
+#define RXQ_RXF_PAUSE_TH_LO_MASK		0xfff
+
+/* RRD flow control register */
+#define REG_RXQ_RRD_PAUSE_THRESH		(REG_RXQ_CTRL+12)
+#define RXQ_RRD_PAUSE_TH_HI_SHIFT		0
+#define RXQ_RRD_PAUSE_TH_HI_MASK		0xfff
+#define RXQ_RRD_PAUSE_TH_LO_SHIFT		16
+#define RXQ_RRD_PAUSE_TH_LO_MASK		0xfff
+
+/* DMA Engine Control Register */
+#define REG_DMA_CTRL				0x15c0
+#define DMA_CTRL_DMAR_IN_ORDER			0x1
+#define DMA_CTRL_DMAR_ENH_ORDER			0x2
+#define DMA_CTRL_DMAR_OUT_ORDER			0x4
+#define DMA_CTRL_RCB_VALUE			0x8
+#define DMA_CTRL_DMAR_BURST_LEN_SHIFT		4
+#define DMA_CTRL_DMAR_BURST_LEN_MASK		7
+#define DMA_CTRL_DMAW_BURST_LEN_SHIFT		7
+#define DMA_CTRL_DMAW_BURST_LEN_MASK		7
+#define DMA_CTRL_DMAR_EN				0x400
+#define DMA_CTRL_DMAW_EN				0x800
+
+/* CMB/SMB Control Register */
+#define REG_CSMB_CTRL				0x15d0
+#define CSMB_CTRL_CMB_NOW			1
+#define CSMB_CTRL_SMB_NOW			2
+#define CSMB_CTRL_CMB_EN			4
+#define CSMB_CTRL_SMB_EN			8
+
+/* CMB DMA Write Threshold Register */
+#define REG_CMB_WRITE_TH			(REG_CSMB_CTRL+ 4)
+#define CMB_RRD_TH_SHIFT			0
+#define CMB_RRD_TH_MASK				0x7ff
+#define CMB_TPD_TH_SHIFT			16
+#define CMB_TPD_TH_MASK				0x7ff
+
+/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */
+#define REG_CMB_WRITE_TIMER			(REG_CSMB_CTRL+ 8)
+#define CMB_RX_TM_SHIFT				0
+#define CMB_RX_TM_MASK				0xffff
+#define CMB_TX_TM_SHIFT				16
+#define CMB_TX_TM_MASK				0xffff
+
+/* Number of packet received since last CMB write */
+#define REG_CMB_RX_PKT_CNT			(REG_CSMB_CTRL+12)
+
+/* Number of packet transmitted since last CMB write */
+#define REG_CMB_TX_PKT_CNT			(REG_CSMB_CTRL+16)
+
+/* SMB auto DMA timer register */
+#define REG_SMB_TIMER				(REG_CSMB_CTRL+20)
+
+/* Mailbox Register */
+#define REG_MAILBOX				0x15f0
+#define MB_RFD_PROD_INDX_SHIFT			0
+#define MB_RFD_PROD_INDX_MASK			0x7ff
+#define MB_RRD_CONS_INDX_SHIFT			11
+#define MB_RRD_CONS_INDX_MASK			0x7ff
+#define MB_TPD_PROD_INDX_SHIFT			22
+#define MB_TPD_PROD_INDX_MASK			0x3ff
+
+/* Interrupt Status Register */
+#define REG_ISR					0x1600
+#define ISR_SMB					1
+#define ISR_TIMER				2
+#define ISR_MANUAL				4
+#define ISR_RXF_OV				8
+#define ISR_RFD_UNRUN				0x10
+#define ISR_RRD_OV				0x20
+#define ISR_TXF_UNRUN				0x40
+#define ISR_LINK				0x80
+#define ISR_HOST_RFD_UNRUN			0x100
+#define ISR_HOST_RRD_OV				0x200
+#define ISR_DMAR_TO_RST				0x400
+#define ISR_DMAW_TO_RST				0x800
+#define ISR_GPHY				0x1000
+#define ISR_RX_PKT				0x10000
+#define ISR_TX_PKT				0x20000
+#define ISR_TX_DMA				0x40000
+#define ISR_RX_DMA				0x80000
+#define ISR_CMB_RX				0x100000
+#define ISR_CMB_TX				0x200000
+#define ISR_MAC_RX				0x400000
+#define ISR_MAC_TX				0x800000
+#define ISR_UR_DETECTED				0x1000000
+#define ISR_FERR_DETECTED			0x2000000
+#define ISR_NFERR_DETECTED			0x4000000
+#define ISR_CERR_DETECTED			0x8000000
+#define ISR_PHY_LINKDOWN			0x10000000
+#define ISR_DIS_SMB				0x20000000
+#define ISR_DIS_DMA				0x40000000
+#define ISR_DIS_INT				0x80000000
+
+/* Interrupt Mask Register */
+#define REG_IMR					0x1604
+
+/* Normal Interrupt mask  */
+#define IMR_NORMAL_MASK	(\
+	ISR_SMB		|\
+	ISR_GPHY	|\
+	ISR_PHY_LINKDOWN|\
+	ISR_DMAR_TO_RST	|\
+	ISR_DMAW_TO_RST	|\
+	ISR_CMB_TX	|\
+	ISR_CMB_RX	)
+
+/* Debug Interrupt Mask  (enable all interrupt) */
+#define IMR_DEBUG_MASK	(\
+	ISR_SMB		|\
+	ISR_TIMER	|\
+	ISR_MANUAL	|\
+	ISR_RXF_OV	|\
+	ISR_RFD_UNRUN	|\
+	ISR_RRD_OV	|\
+	ISR_TXF_UNRUN	|\
+	ISR_LINK	|\
+	ISR_CMB_TX	|\
+	ISR_CMB_RX	|\
+	ISR_RX_PKT	|\
+	ISR_TX_PKT	|\
+	ISR_MAC_RX	|\
+	ISR_MAC_TX	)
+
+/* Interrupt Status Register */
+#define REG_RFD_RRD_IDX				0x1800
+#define REG_TPD_IDX				0x1804
+
+/*  MII definition */
+/* PHY Common Register */
+#define MII_BMCR					0x00
+#define MII_BMSR					0x01
+#define MII_PHYSID1					0x02
+#define MII_PHYSID2					0x03
+#define MII_ADVERTISE					0x04
+#define MII_LPA						0x05
+#define MII_EXPANSION					0x06
+#define MII_AT001_CR					0x09
+#define MII_AT001_SR					0x0A
+#define MII_AT001_ESR					0x0F
+#define MII_AT001_PSCR					0x10
+#define MII_AT001_PSSR					0x11
+#define MII_DCOUNTER					0x12
+#define MII_FCSCOUNTER					0x13
+#define MII_NWAYTEST					0x14
+#define MII_RERRCOUNTER					0x15
+#define MII_SREVISION					0x16
+#define MII_RESV1					0x17
+#define MII_LBRERROR					0x18
+#define MII_PHYADDR					0x19
+#define MII_RESV2					0x1a
+#define MII_TPISTATUS					0x1b
+#define MII_NCONFIG					0x1c
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB				0x0040	/* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE				0x0080	/* Collision test enable */
+#define MII_CR_FULL_DUPLEX				0x0100	/* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG				0x0200	/* Restart auto negotiation */
+#define MII_CR_ISOLATE					0x0400	/* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN				0x0800	/* Power down */
+#define MII_CR_AUTO_NEG_EN				0x1000	/* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB				0x2000	/* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK					0x4000	/* 0 = normal, 1 = loopback */
+#define MII_CR_RESET					0x8000	/* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_MASK				0x2040
+#define MII_CR_SPEED_1000				0x0040
+#define MII_CR_SPEED_100				0x2000
+#define MII_CR_SPEED_10					0x0000
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS				0x0001	/* Extended register capabilities */
+#define MII_SR_JABBER_DETECT				0x0002	/* Jabber Detected */
+#define MII_SR_LINK_STATUS				0x0004	/* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS				0x0008	/* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT				0x0010	/* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE				0x0020	/* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS			0x0040	/* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS				0x0100	/* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS				0x0200	/* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS				0x0400	/* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS				0x0800	/* 10T   Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS				0x1000	/* 10T   Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS				0x2000	/* 100X  Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS				0x4000	/* 100X  Full Duplex Capable */
+#define MII_SR_100T4_CAPS				0x8000	/* 100T4 Capable */
+
+/* Link partner ability register. */
+#define MII_LPA_SLCT					0x001f	/* Same as advertise selector  */
+#define MII_LPA_10HALF					0x0020	/* Can do 10mbps half-duplex   */
+#define MII_LPA_10FULL					0x0040	/* Can do 10mbps full-duplex   */
+#define MII_LPA_100HALF					0x0080	/* Can do 100mbps half-duplex  */
+#define MII_LPA_100FULL					0x0100	/* Can do 100mbps full-duplex  */
+#define MII_LPA_100BASE4				0x0200	/* 100BASE-T4  */
+#define MII_LPA_PAUSE					0x0400	/* PAUSE */
+#define MII_LPA_ASYPAUSE				0x0800	/* Asymmetrical PAUSE */
+#define MII_LPA_RFAULT					0x2000	/* Link partner faulted        */
+#define MII_LPA_LPACK					0x4000	/* Link partner acked us       */
+#define MII_LPA_NPAGE					0x8000	/* Next page bit               */
+
+/* Autoneg Advertisement Register */
+#define MII_AR_SELECTOR_FIELD				0x0001	/* indicates IEEE 802.3 CSMA/CD */
+#define MII_AR_10T_HD_CAPS				0x0020	/* 10T   Half Duplex Capable */
+#define MII_AR_10T_FD_CAPS				0x0040	/* 10T   Full Duplex Capable */
+#define MII_AR_100TX_HD_CAPS				0x0080	/* 100TX Half Duplex Capable */
+#define MII_AR_100TX_FD_CAPS				0x0100	/* 100TX Full Duplex Capable */
+#define MII_AR_100T4_CAPS				0x0200	/* 100T4 Capable */
+#define MII_AR_PAUSE					0x0400	/* Pause operation desired */
+#define MII_AR_ASM_DIR					0x0800	/* Asymmetric Pause Direction bit */
+#define MII_AR_REMOTE_FAULT				0x2000	/* Remote Fault detected */
+#define MII_AR_NEXT_PAGE				0x8000	/* Next Page ability supported */
+#define MII_AR_SPEED_MASK				0x01E0
+#define MII_AR_DEFAULT_CAP_MASK				0x0DE0
+
+/* 1000BASE-T Control Register */
+#define MII_AT001_CR_1000T_HD_CAPS			0x0100	/* Advertise 1000T HD capability */
+#define MII_AT001_CR_1000T_FD_CAPS			0x0200	/* Advertise 1000T FD capability  */
+#define MII_AT001_CR_1000T_REPEATER_DTE			0x0400	/* 1=Repeater/switch device port, 0=DTE device */
+#define MII_AT001_CR_1000T_MS_VALUE			0x0800	/* 1=Configure PHY as Master, 0=Configure PHY as Slave */
+#define MII_AT001_CR_1000T_MS_ENABLE			0x1000	/* 1=Master/Slave manual config value, 0=Automatic Master/Slave config */
+#define MII_AT001_CR_1000T_TEST_MODE_NORMAL		0x0000	/* Normal Operation */
+#define MII_AT001_CR_1000T_TEST_MODE_1			0x2000	/* Transmit Waveform test */
+#define MII_AT001_CR_1000T_TEST_MODE_2			0x4000	/* Master Transmit Jitter test */
+#define MII_AT001_CR_1000T_TEST_MODE_3			0x6000	/* Slave Transmit Jitter test */
+#define MII_AT001_CR_1000T_TEST_MODE_4			0x8000	/* Transmitter Distortion test */
+#define MII_AT001_CR_1000T_SPEED_MASK			0x0300
+#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK		0x0300
+
+/* 1000BASE-T Status Register */
+#define MII_AT001_SR_1000T_LP_HD_CAPS			0x0400	/* LP is 1000T HD capable */
+#define MII_AT001_SR_1000T_LP_FD_CAPS			0x0800	/* LP is 1000T FD capable */
+#define MII_AT001_SR_1000T_REMOTE_RX_STATUS		0x1000	/* Remote receiver OK */
+#define MII_AT001_SR_1000T_LOCAL_RX_STATUS		0x2000	/* Local receiver OK */
+#define MII_AT001_SR_1000T_MS_CONFIG_RES		0x4000	/* 1=Local TX is Master, 0=Slave */
+#define MII_AT001_SR_1000T_MS_CONFIG_FAULT		0x8000	/* Master/Slave config fault */
+#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT	12
+#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT	13
+
+/* Extended Status Register */
+#define MII_AT001_ESR_1000T_HD_CAPS			0x1000	/* 1000T HD capable */
+#define MII_AT001_ESR_1000T_FD_CAPS			0x2000	/* 1000T FD capable */
+#define MII_AT001_ESR_1000X_HD_CAPS			0x4000	/* 1000X HD capable */
+#define MII_AT001_ESR_1000X_FD_CAPS			0x8000	/* 1000X FD capable */
+
+/* AT001 PHY Specific Control Register */
+#define MII_AT001_PSCR_JABBER_DISABLE			0x0001	/* 1=Jabber Function disabled */
+#define MII_AT001_PSCR_POLARITY_REVERSAL		0x0002	/* 1=Polarity Reversal enabled */
+#define MII_AT001_PSCR_SQE_TEST				0x0004	/* 1=SQE Test enabled */
+#define MII_AT001_PSCR_MAC_POWERDOWN			0x0008
+#define MII_AT001_PSCR_CLK125_DISABLE			0x0010	/* 1=CLK125 low, 0=CLK125 toggling */
+#define MII_AT001_PSCR_MDI_MANUAL_MODE			0x0000	/* MDI Crossover Mode bits 6:5, Manual MDI configuration */
+#define MII_AT001_PSCR_MDIX_MANUAL_MODE			0x0020	/* Manual MDIX configuration */
+#define MII_AT001_PSCR_AUTO_X_1000T			0x0040	/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define MII_AT001_PSCR_AUTO_X_MODE			0x0060	/* Auto crossover enabled all speeds. */
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE		0x0080	/* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold), 0=Normal 10BASE-T RX Threshold */
+#define MII_AT001_PSCR_MII_5BIT_ENABLE			0x0100	/* 1=5-Bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define MII_AT001_PSCR_SCRAMBLER_DISABLE		0x0200	/* 1=Scrambler disable */
+#define MII_AT001_PSCR_FORCE_LINK_GOOD			0x0400	/* 1=Force link good */
+#define MII_AT001_PSCR_ASSERT_CRS_ON_TX			0x0800	/* 1=Assert CRS on Transmit */
+#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT		1
+#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT		5
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT	7
+
+/* AT001 PHY Specific Status Register */
+#define MII_AT001_PSSR_SPD_DPLX_RESOLVED		0x0800	/* 1=Speed & Duplex resolved */
+#define MII_AT001_PSSR_DPLX				0x2000	/* 1=Duplex 0=Half Duplex */
+#define MII_AT001_PSSR_SPEED				0xC000	/* Speed, bits 14:15 */
+#define MII_AT001_PSSR_10MBS				0x0000	/* 00=10Mbs */
+#define MII_AT001_PSSR_100MBS				0x4000	/* 01=100Mbs */
+#define MII_AT001_PSSR_1000MBS				0x8000	/* 10=1000Mbs */
+
+/* PCI Command Register Bit Definitions */
+#define PCI_REG_COMMAND					0x04	/* PCI Command Register */
+#define CMD_IO_SPACE					0x0001
+#define CMD_MEMORY_SPACE				0x0002
+#define CMD_BUS_MASTER					0x0004
+
+/* Wake Up Filter Control */
+#define ATL1_WUFC_LNKC	0x00000001	/* Link Status Change Wakeup Enable */
+#define ATL1_WUFC_MAG	0x00000002	/* Magic Packet Wakeup Enable */
+#define ATL1_WUFC_EX	0x00000004	/* Directed Exact Wakeup Enable */
+#define ATL1_WUFC_MC	0x00000008	/* Multicast Wakeup Enable */
+#define ATL1_WUFC_BC	0x00000010	/* Broadcast Wakeup Enable */
+
+/* Error Codes */
+#define ATL1_SUCCESS			0
+#define ATL1_ERR_EEPROM			1
+#define ATL1_ERR_PHY			2
+#define ATL1_ERR_CONFIG			3
+#define ATL1_ERR_PARAM			4
+#define ATL1_ERR_MAC_TYPE		5
+#define ATL1_ERR_PHY_TYPE		6
+#define ATL1_ERR_PHY_SPEED		7
+#define ATL1_ERR_PHY_RES		8
+
+#define SPEED_0		0xffff
+#define SPEED_10	10
+#define SPEED_100	100
+#define SPEED_1000	1000
+#define HALF_DUPLEX	1
+#define FULL_DUPLEX	2
+
+#define MEDIA_TYPE_AUTO_SENSOR	0
+#define MEDIA_TYPE_1000M_FULL	1
+#define MEDIA_TYPE_100M_FULL	2
+#define MEDIA_TYPE_100M_HALF	3
+#define MEDIA_TYPE_10M_FULL	4
+#define MEDIA_TYPE_10M_HALF	5
+
+#define ADVERTISE_10_HALF		0x0001
+#define ADVERTISE_10_FULL		0x0002
+#define ADVERTISE_100_HALF		0x0004
+#define ADVERTISE_100_FULL		0x0008
+#define ADVERTISE_1000_HALF		0x0010
+#define ADVERTISE_1000_FULL		0x0020
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT	0x002F	/* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL	0x000F	/* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL	0x0003	/* 10Mbps Full & Half speeds */
+
+/* The size (in bytes) of a ethernet packet */
+#define ENET_HEADER_SIZE		14
+#define MAXIMUM_ETHERNET_FRAME_SIZE	1518	/* with FCS */
+#define MINIMUM_ETHERNET_FRAME_SIZE	64	/* with FCS */
+#define ETHERNET_FCS_SIZE		4
+#define MAX_JUMBO_FRAME_SIZE		0x2800
+
+#define PHY_AUTO_NEG_TIME	45	/* 4.5 Seconds */
+#define PHY_FORCE_TIME		20	/* 2.0 Seconds */
+
+/* For checksumming , the sum of all words in the EEPROM should equal 0xBABA */
+#define EEPROM_SUM		0xBABA
+#define NODE_ADDRESS_SIZE	6
+
+/* Statistics counters collected by the MAC */
+struct stats_msg_block {
+	/* rx */
+	u32 rx_ok;		/* The number of good packet received. */
+	u32 rx_bcast;		/* The number of good broadcast packet received. */
+	u32 rx_mcast;		/* The number of good multicast packet received. */
+	u32 rx_pause;		/* The number of Pause packet received. */
+	u32 rx_ctrl;		/* The number of Control packet received other than Pause frame. */
+	u32 rx_fcs_err;		/* The number of packets with bad FCS. */
+	u32 rx_len_err;		/* The number of packets with mismatch of length field and actual size. */
+	u32 rx_byte_cnt;	/* The number of bytes of good packet received. FCS is NOT included. */
+	u32 rx_runt;		/* The number of packets received that are less than 64 byte long and with good FCS. */
+	u32 rx_frag;		/* The number of packets received that are less than 64 byte long and with bad FCS. */
+	u32 rx_sz_64;		/* The number of good and bad packets received that are 64 byte long. */
+	u32 rx_sz_65_127;	/* The number of good and bad packets received that are between 65 and 127-byte long. */
+	u32 rx_sz_128_255;	/* The number of good and bad packets received that are between 128 and 255-byte long. */
+	u32 rx_sz_256_511;	/* The number of good and bad packets received that are between 256 and 511-byte long. */
+	u32 rx_sz_512_1023;	/* The number of good and bad packets received that are between 512 and 1023-byte long. */
+	u32 rx_sz_1024_1518;	/* The number of good and bad packets received that are between 1024 and 1518-byte long. */
+	u32 rx_sz_1519_max;	/* The number of good and bad packets received that are between 1519-byte and MTU. */
+	u32 rx_sz_ov;		/* The number of good and bad packets received that are more than MTU size šC truncated by Selene. */
+	u32 rx_rxf_ov;		/* The number of frame dropped due to occurrence of RX FIFO overflow. */
+	u32 rx_rrd_ov;		/* The number of frame dropped due to occurrence of RRD overflow. */
+	u32 rx_align_err;	/* Alignment Error */
+	u32 rx_bcast_byte_cnt;	/* The byte count of broadcast packet received, excluding FCS. */
+	u32 rx_mcast_byte_cnt;	/* The byte count of multicast packet received, excluding FCS. */
+	u32 rx_err_addr;	/* The number of packets dropped due to address filtering. */
+
+	/* tx */
+	u32 tx_ok;		/* The number of good packet transmitted. */
+	u32 tx_bcast;		/* The number of good broadcast packet transmitted. */
+	u32 tx_mcast;		/* The number of good multicast packet transmitted. */
+	u32 tx_pause;		/* The number of Pause packet transmitted. */
+	u32 tx_exc_defer;	/* The number of packets transmitted with excessive deferral. */
+	u32 tx_ctrl;		/* The number of packets transmitted is a control frame, excluding Pause frame. */
+	u32 tx_defer;		/* The number of packets transmitted that is deferred. */
+	u32 tx_byte_cnt;	/* The number of bytes of data transmitted. FCS is NOT included. */
+	u32 tx_sz_64;		/* The number of good and bad packets transmitted that are 64 byte long. */
+	u32 tx_sz_65_127;	/* The number of good and bad packets transmitted that are between 65 and 127-byte long. */
+	u32 tx_sz_128_255;	/* The number of good and bad packets transmitted that are between 128 and 255-byte long. */
+	u32 tx_sz_256_511;	/* The number of good and bad packets transmitted that are between 256 and 511-byte long. */
+	u32 tx_sz_512_1023;	/* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */
+	u32 tx_sz_1024_1518;	/* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */
+	u32 tx_sz_1519_max;	/* The number of good and bad packets transmitted that are between 1519-byte and MTU. */
+	u32 tx_1_col;		/* The number of packets subsequently transmitted successfully with a single prior collision. */
+	u32 tx_2_col;		/* The number of packets subsequently transmitted successfully with multiple prior collisions. */
+	u32 tx_late_col;	/* The number of packets transmitted with late collisions. */
+	u32 tx_abort_col;	/* The number of transmit packets aborted due to excessive collisions. */
+	u32 tx_underrun;	/* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+	u32 tx_rd_eop;		/* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */
+	u32 tx_len_err;		/* The number of transmit packets with length field does NOT match the actual frame size. */
+	u32 tx_trunc;		/* The number of transmit packets truncated due to size exceeding MTU. */
+	u32 tx_bcast_byte;	/* The byte count of broadcast packet transmitted, excluding FCS. */
+	u32 tx_mcast_byte;	/* The byte count of multicast packet transmitted, excluding FCS. */
+	u32 smb_updated;	/* 1: SMB Updated. This is used by software as the indication of the statistics update.
+				 * Software should clear this bit as soon as retrieving the statistics information. */
+};
+
+/* Coalescing Message Block */
+struct coals_msg_block {
+	u32 int_stats;		/* interrupt status */
+	u16 rrd_prod_idx;	/* TRD Producer Index. */
+	u16 rfd_cons_idx;	/* RFD Consumer Index. */
+	u16 update;		/* Selene sets this bit every time it DMA the CMB to host memory.
+				 * Software supposes to clear this bit when CMB information is processed. */
+	u16 tpd_cons_idx;	/* TPD Consumer Index. */
+};
+
+/* RRD descriptor */
+struct rx_return_desc {
+	u8 num_buf;		/* Number of RFD buffers used by the received packet */
+	u8 resved;
+	u16 buf_indx;		/* RFD Index of the first buffer */
+	union {
+		u32 valid;
+		struct {
+			u16 rx_chksum;
+			u16 pkt_size;
+		} xsum_sz;
+	} xsz;
+
+	u16 pkt_flg;		/* Packet flags */
+	u16 err_flg;		/* Error flags */
+	u16 resved2;
+	u16 vlan_tag;		/* VLAN TAG */
+};
+
+#define PACKET_FLAG_ETH_TYPE	0x0080
+#define PACKET_FLAG_VLAN_INS	0x0100
+#define PACKET_FLAG_ERR		0x0200
+#define PACKET_FLAG_IPV4	0x0400
+#define PACKET_FLAG_UDP		0x0800
+#define PACKET_FLAG_TCP		0x1000
+#define PACKET_FLAG_BCAST	0x2000
+#define PACKET_FLAG_MCAST	0x4000
+#define PACKET_FLAG_PAUSE	0x8000
+
+#define ERR_FLAG_CRC		0x0001
+#define ERR_FLAG_CODE		0x0002
+#define ERR_FLAG_DRIBBLE	0x0004
+#define ERR_FLAG_RUNT		0x0008
+#define ERR_FLAG_OV		0x0010
+#define ERR_FLAG_TRUNC		0x0020
+#define ERR_FLAG_IP_CHKSUM	0x0040
+#define ERR_FLAG_L4_CHKSUM	0x0080
+#define ERR_FLAG_LEN		0x0100
+#define ERR_FLAG_DES_ADDR	0x0200
+
+/* RFD descriptor */
+struct rx_free_desc {
+	__le64 buffer_addr;	/* Address of the descriptor's data buffer */
+	__le16 buf_len;		/* Size of the receive buffer in host memory, in byte */
+	u16 coalese;		/* Update consumer index to host after the reception of this frame */
+	/* __attribute__ ((packed)) is required */
+} __attribute__ ((packed));
+
+/* tsopu defines */
+#define TSO_PARAM_BUFLEN_MASK           0x3FFF
+#define TSO_PARAM_BUFLEN_SHIFT          0
+#define TSO_PARAM_DMAINT_MASK           0x0001
+#define TSO_PARAM_DMAINT_SHIFT          14
+#define TSO_PARAM_PKTNT_MASK            0x0001
+#define TSO_PARAM_PKTINT_SHIFT          15
+#define TSO_PARAM_VLANTAG_MASK          0xFFFF
+#define TSO_PARAM_VLAN_SHIFT            16
+
+/* tsopl defines */
+#define TSO_PARAM_EOP_MASK              0x0001
+#define TSO_PARAM_EOP_SHIFT             0
+#define TSO_PARAM_COALESCE_MASK         0x0001
+#define TSO_PARAM_COALESCE_SHIFT        1
+#define TSO_PARAM_INSVLAG_MASK          0x0001
+#define TSO_PARAM_INSVLAG_SHIFT         2
+#define TSO_PARAM_CUSTOMCKSUM_MASK      0x0001
+#define TSO_PARAM_CUSTOMCKSUM_SHIFT     3
+#define TSO_PARAM_SEGMENT_MASK          0x0001
+#define TSO_PARAM_SEGMENT_SHIFT         4
+#define TSO_PARAM_IPCKSUM_MASK          0x0001
+#define TSO_PARAM_IPCKSUM_SHIFT         5
+#define TSO_PARAM_TCPCKSUM_MASK         0x0001
+#define TSO_PARAM_TCPCKSUM_SHIFT        6
+#define TSO_PARAM_UDPCKSUM_MASK         0x0001
+#define TSO_PARAM_UDPCKSUM_SHIFT        7
+#define TSO_PARAM_VLANTAGGED_MASK       0x0001
+#define TSO_PARAM_VLANTAGGED_SHIFT      8
+#define TSO_PARAM_ETHTYPE_MASK          0x0001
+#define TSO_PARAM_ETHTYPE_SHIFT         9
+#define TSO_PARAM_IPHL_MASK             0x000F
+#define TSO_PARAM_IPHL_SHIFT            10
+#define TSO_PARAM_TCPHDRLEN_MASK        0x000F
+#define TSO_PARAM_TCPHDRLEN_SHIFT       14
+#define TSO_PARAM_HDRFLAG_MASK          0x0001
+#define TSO_PARAM_HDRFLAG_SHIFT         18
+#define TSO_PARAM_MSS_MASK              0x1FFF
+#define TSO_PARAM_MSS_SHIFT             19
+
+/* csumpu defines */
+#define CSUM_PARAM_BUFLEN_MASK          0x3FFF
+#define CSUM_PARAM_BUFLEN_SHIFT         0
+#define CSUM_PARAM_DMAINT_MASK          0x0001
+#define CSUM_PARAM_DMAINT_SHIFT         14
+#define CSUM_PARAM_PKTINT_MASK          0x0001
+#define CSUM_PARAM_PKTINT_SHIFT         15
+#define CSUM_PARAM_VALANTAG_MASK        0xFFFF
+#define CSUM_PARAM_VALAN_SHIFT          16
+
+/* csumpl defines*/
+#define CSUM_PARAM_EOP_MASK             0x0001
+#define CSUM_PARAM_EOP_SHIFT            0
+#define CSUM_PARAM_COALESCE_MASK        0x0001
+#define CSUM_PARAM_COALESCE_SHIFT       1
+#define CSUM_PARAM_INSVLAG_MASK         0x0001
+#define CSUM_PARAM_INSVLAG_SHIFT        2
+#define CSUM_PARAM_CUSTOMCKSUM_MASK     0x0001
+#define CSUM_PARAM_CUSTOMCKSUM_SHIFT    3
+#define CSUM_PARAM_SEGMENT_MASK         0x0001
+#define CSUM_PARAM_SEGMENT_SHIFT        4
+#define CSUM_PARAM_IPCKSUM_MASK         0x0001
+#define CSUM_PARAM_IPCKSUM_SHIFT        5
+#define CSUM_PARAM_TCPCKSUM_MASK        0x0001
+#define CSUM_PARAM_TCPCKSUM_SHIFT       6
+#define CSUM_PARAM_UDPCKSUM_MASK        0x0001
+#define CSUM_PARAM_UDPCKSUM_SHIFT       7
+#define CSUM_PARAM_VLANTAGGED_MASK      0x0001
+#define CSUM_PARAM_VLANTAGGED_SHIFT     8
+#define CSUM_PARAM_ETHTYPE_MASK         0x0001
+#define CSUM_PARAM_ETHTYPE_SHIFT        9
+#define CSUM_PARAM_IPHL_MASK            0x000F
+#define CSUM_PARAM_IPHL_SHIFT           10
+#define CSUM_PARAM_PLOADOFFSET_MASK     0x00FF
+#define CSUM_PARAM_PLOADOFFSET_SHIFT    16
+#define CSUM_PARAM_XSUMOFFSET_MASK      0x00FF
+#define CSUM_PARAM_XSUMOFFSET_SHIFT     24
+
+/* TPD descriptor */
+struct tso_param {
+        /* The order of these declarations is important -- don't change it */
+        u32 tsopu;      /* tso_param upper word */
+        u32 tsopl;      /* tso_param lower word */
+};
+
+struct csum_param {
+        /* The order of these declarations is important -- don't change it */
+        u32 csumpu;     /* csum_param upper word */
+        u32 csumpl;     /* csum_param lower word */
+};
+
+union tpd_descr {
+	u64 data;
+	struct csum_param csum;
+	struct tso_param tso;
+};
+
+struct tx_packet_desc {
+	__le64 buffer_addr;
+	union tpd_descr desc;
+};
+
+/* DMA Order Settings */
+enum atl1_dma_order {
+	atl1_dma_ord_in = 1,
+	atl1_dma_ord_enh = 2,
+	atl1_dma_ord_out = 4
+};
+
+enum atl1_dma_rcb {
+	atl1_rcb_64 = 0,
+	atl1_rcb_128 = 1
+};
+
+enum atl1_dma_req_block {
+	atl1_dma_req_128 = 0,
+	atl1_dma_req_256 = 1,
+	atl1_dma_req_512 = 2,
+	atl1_dam_req_1024 = 3,
+	atl1_dam_req_2048 = 4,
+	atl1_dma_req_4096 = 5
+};
+
+struct atl1_spi_flash_dev {
+	const char *manu_name;	/* manufacturer id */
+	/* op-code */
+	u8 cmd_wrsr;
+	u8 cmd_read;
+	u8 cmd_program;
+	u8 cmd_wren;
+	u8 cmd_wrdi;
+	u8 cmd_rdsr;
+	u8 cmd_rdid;
+	u8 cmd_sector_erase;
+	u8 cmd_chip_erase;
+};
+
+#endif	/* _ATL1_HW_H_ */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux