Hello.
Bartlomiej Zolnierkiewicz wrote:
[PATCH] ide: disable DMA in ->ide_dma_check for "no IORDY" case
I've looked thru the code, and found more issues with the PIO fallback
there. Will try to cook up patches for at least some drivers...
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Index: b/drivers/ide/pci/aec62xx.c
===================================================================
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -214,12 +214,10 @@ static int aec62xx_config_drive_xfer_rat
if (ide_use_dma(drive) && config_chipset_for_dma(drive))
return hwif->ide_dma_on(drive);
- if (ide_use_fast_pio(drive)) {
+ if (ide_use_fast_pio(drive))
aec62xx_tune_drive(drive, 5);
This function looks like it's working (thouugh having the wrong limit of
PIO5 on auto-tuning) but is unnecassary complex.
Heh, the driver is certainly a rip-off form hpt366.c. What a doubtful
example they have chosen... :-)
Index: b/drivers/ide/pci/atiixp.c
===================================================================
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -264,10 +264,9 @@ static int atiixp_dma_check(ide_drive_t
tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
It's simply stupid to convert PIO mode to PIO mode. The whole idea is
doubtful as well..
hwif->speedproc(drive, speed);
Well, well, the tuneproc() method can't ahndle auto-tunuing here (255)...
And it also doesn't set up drive's own speed. The code seem to be another
rip-off from piix.c, repeating all its mistakes... :-)
Index: b/drivers/ide/pci/cmd64x.c
===================================================================
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -479,12 +479,10 @@ static int cmd64x_config_drive_for_dma (
if (ide_use_dma(drive) && config_chipset_for_dma(drive))
return hwif->ide_dma_on(drive);
- if (ide_use_fast_pio(drive)) {
+ if (ide_use_fast_pio(drive))
config_chipset_for_pio(drive, 1);
This function will always set PIO mode 4. Mess.
Index: b/drivers/ide/pci/cs5535.c
===================================================================
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -206,10 +206,9 @@ static int cs5535_dma_check(ide_drive_t
if (ide_use_fast_pio(drive)) {
speed = ide_get_best_pio_mode(drive, 255, 4, NULL);
cs5535_set_drive(drive, speed);
Could be folded into tuneproc() method call.
Index: b/drivers/ide/pci/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -339,12 +339,10 @@ static int pdc202xx_config_drive_xfer_ra
if (ide_use_dma(drive) && config_chipset_for_dma(drive))
return hwif->ide_dma_on(drive);
- if (ide_use_fast_pio(drive)) {
+ if (ide_use_fast_pio(drive))
hwif->tuneproc(drive, 5);
This driver's tuneproc() method always auto-tunes here instead of setting
what it's told too -- I'll send a patch...
Index: b/drivers/ide/pci/siimage.c
===================================================================
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -420,12 +420,10 @@ static int siimage_config_drive_for_dma
if (ide_use_dma(drive) && config_chipset_for_dma(drive))
return hwif->ide_dma_on(drive);
- if (ide_use_fast_pio(drive)) {
+ if (ide_use_fast_pio(drive))
config_chipset_for_pio(drive, 1);
This function will also always set PIO mode 4. More mess.
Index: b/drivers/ide/pci/sis5513.c
===================================================================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -678,12 +678,10 @@ static int sis5513_config_xfer_rate(ide_
if (ide_use_dma(drive) && config_chipset_for_dma(drive))
return hwif->ide_dma_on(drive);
- if (ide_use_fast_pio(drive)) {
+ if (ide_use_fast_pio(drive))
sis5513_tune_drive(drive, 5);
Ugh, PIO fallback effectively always tries to set mode 4 here (thanks
it's not 5). Mess.
MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
