Re: [PATCH 2.6.20-rc3 01/01] usb: Sierra Wireless auto set D0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 15, 2007 at 05:33:28PM -0800, Kevin Lloyd wrote:
> from: Kevin Lloyd <[email protected]>
> 
> This patch ensures that the device is turned on when inserted into the 
> system (which mostly affects the EM5725 and MC5720. It also adds more 
> VID/PIDs and matches the N_OUT_URB with the airprime driver.
> 
> Signed-off-by: Kevin Lloyd <[email protected]>
> 
> ---
> 
> --- linux-2.6.20-rc5/drivers/usb/serial/sierra.c.orig	2007-01-15 
> 15:17:15.000000000 -0800
> +++ linux-2.6.20-rc5/drivers/usb/serial/sierra.c	2007-01-15 
> 15:41:56.000000000 -0800
> @@ -14,9 +14,31 @@
>   Whom based his on the Keyspan driver by Hugh Blemings <[email protected]>
> 
>   History:
> +v.1.0.6:
> + klloyd
> + Added more devices and added Vendor Specific USB message to make sure
> + that devices are in D0 state when they start. This is very important for
> + MC5720 and EM5625 modules that go between Windows and Non-Windows 
> + machines.
> +v.1.0.5:
> + Greg KH
> + This saves over 30 lines and fixes a warning from sparse and allows
> + debugging to work dynamically like all other usb-serial drivers.
> + klloyd
> + Changed versioning to v.x.y.z
> +v.1.04:
> + klloyd
> + Adds significant throughput increase to the Sierra driver (uses multiple
> + urgs for download link). This patch also updates the current sierra.c 
> + driver so that it supports both 3-port Sierra devices and 1-port legacy
> + devices and removes Sierra's references in other related files (Kconfig
> + and airprime.c).
> +v.1.03
> + klloyd
> + Adds DTR line control support and impliments urb control.

This is not needed, nor recommended.  The changelog information in the
kernel provides this information.

> 
> -#define DRIVER_VERSION "v.1.0.5"
> +#define DRIVER_VERSION "v.1.0.6"
> #define DRIVER_AUTHOR "Kevin Lloyd <[email protected]>"
> #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
> 
> @@ -31,14 +53,14 @@
> 
> 
> static struct usb_device_id id_table [] = {
> +	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
> 	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
> 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
> -	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
> 	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
> -	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */

You are dropping support for this device id.  Is that correct?  Are you
sure?

It was reported to me by Peter Kucmeroski and Jason Ganovsky, and you
were CCed when the patch went into the kernel that added this id.

> @@ -123,6 +145,7 @@ static int sierra_send_setup(struct usb_
> 		return usb_control_msg(serial->dev,
> 				usb_rcvctrlpipe(serial->dev, 0),
> 				0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
> +
> 	}
> 
> 	return 0;

Is this change really needed?  :)


> @@ -396,6 +419,8 @@ static int sierra_open(struct usb_serial
> 	struct usb_serial *serial = port->serial;
> 	int i, err;
> 	struct urb *urb;
> +	int result;
> +	__u16 set_mode_dzero = 0x0000; //Set mode to D0

// comments are not recommended in the kernel, especially for something
as trivial as a variable name.

> 	portdata = usb_get_serial_port_data(port);
> 
> @@ -442,6 +467,11 @@ static int sierra_open(struct usb_serial
> 
> 	port->tty->low_latency = 1;
> 
> +	//set mode to D0

Use /* */ please.

Care to resubmit this?

thanks,

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux