sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current: sense key: Hardware Error
ASC=0x42 ASCQ=0x0
Info fld=0x400802c
end_request: I/O error, dev sda, sector 202369
Aborting journal on device sda1.
journal commit I/O error
ext3_abort called.
EXT3-fs error (device sda1): ext3_journal_start_sb: Detected aborted journal
Remounting filesystem read-only
It's always on a journal write and smart on the disk doesn't see a
thing (no error log, short and long smart tests pass).
In case it is relevant (it's an IBM LS20 blade):
00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
01:04.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet (rev 10)
02:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet (rev 10)
02:02.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM-ESXS Model: ST936701LC FN Rev: B41D
Type: Direct-Access ANSI SCSI revision: 04
OG.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
