Re: High lock spin time for zone->lru_lock under extreme conditions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On Fri, 12 Jan 2007 23:36:43 -0800 Ravikiran G Thirumalai <[email protected]> wrote:
> On Sat, Jan 13, 2007 at 03:39:45PM +1100, Nick Piggin wrote:
> > Ravikiran G Thirumalai wrote:
> > >Hi,
> > >We noticed high interrupt hold off times while running some memory 
> > >intensive
> > >tests on a Sun x4600 8 socket 16 core x86_64 box.  We noticed softlockups,
> > 
> > [...]
> > 
> > >We did not use any lock debugging options and used plain old rdtsc to
> > >measure cycles.  (We disable cpu freq scaling in the BIOS). All we did was
> > >this:
> > >
> > >void __lockfunc _spin_lock_irq(spinlock_t *lock)
> > >{
> > >        local_irq_disable();
> > >        ------------------------> rdtsc(t1);
> > >        preempt_disable();
> > >        spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
> > >        _raw_spin_lock(lock);
> > >        ------------------------> rdtsc(t2);
> > >        if (lock->spin_time < (t2 - t1))
> > >                lock->spin_time = t2 - t1;
> > >}
> > >
> > >On some runs, we found that the zone->lru_lock spun for 33 seconds or more
> > >while the maximal CS time was 3 seconds or so.
> > 
> > What is the "CS time"?
> 
> Critical Section :).  This is the maximal time interval I measured  from 
> t2 above to the time point we release the spin lock.  This is the hold 
> time I guess.

By no means.  The theory here is that CPUA is taking and releasing the
lock at high frequency, but CPUB never manages to get in and take it.  In
which case the maximum-acquisition-time is much larger than the
maximum-hold-time.

I'd suggest that you use a similar trick to measure the maximum hold time:
start the timer after we got the lock, stop it just before we release the
lock (assuming that the additional rdtsc delay doesn't "fix" things, of
course...)


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux