Am Mittwoch 10 Januar 2007 18:47 schrieb Lennart Sorensen: > On Wed, Jan 10, 2007 at 06:29:28PM +0100, Prakash Punnoor wrote: > > You can install the Intel Matrix driver after "adjusting" the inf file... > > Hmm, I guess a good question is: Why should I have to edit the inf file? > Is it an issue of them making it only install if your hardware is > already set to ahci mode? But how am I supposed to boot and install the > driver until I have the driver installed then. Well I might try that > next time I go there. How stupid of intel. Intel wants you to buy hw with ICH8R. ICH8 isn't get the advanced features for free.... To get the driver going: Put your hd to the jmicron, install driver, put hd back to ich8... -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V
Attachment:
pgpgtGMDLcMcI.pgp
Description: PGP signature
- Follow-Ups:
- References:
- SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18
- From: "Jeff V. Merkey" <[email protected]>
- Re: SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18
- From: Prakash Punnoor <[email protected]>
- Re: SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18
- From: [email protected] (Lennart Sorensen)
- SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18
- Prev by Date: Re: SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18
- Next by Date: Re: SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18
- Previous by thread: Re: SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18
- Next by thread: Re: SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18
- Index(es):
 |