Len Brown wrote:
..same problem with 2.6.20-rc3. Last worked with
2.6.19-rc6-git12, so it was 2.6.19 where it failed.
Attaching both case1 normal, case2 acpi=noirq. With acpi=noirq ethernet
doesn't get configured, route -n says it's an Unsupported operation,
ifconfig only shows for localhost, ifconfig eth0 192.168.10.5 also
complains of a config error.
It seems that the "acpi=noirq" (and probably also the acpi=off) case
is simply an additional broken case, not a success case to compare to.
The thing we really want to compare is dmesg and /proc/interrupts
from 2.6.19-rc6-git12, and the broken current release.
Perhaps you can put that info in the bug report when you file it.
thanks,
-Len
2.6.19-rc6-git12 fails in exactly the same way, from /var/log/messages
it seems 2.6.19-rc6 19/11/06 first saw the problem, details later when I
boot 2.6.19-rc5.
If I boot an affected kernel with the SuSEfirewall2 enabled and then
stop the firewall, the problems goes away.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
