[PATCH] updated proper-backlight-selection-for-fbdev-drivers.patch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-Off-By: James Simmons <[email protected]>

Here is the updated patch for proper backlight selection.

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4e83f01..39d8783 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -4,20 +4,9 @@
 
 menu "Graphics support"
 
-config FIRMWARE_EDID
-       bool "Enable firmware EDID"
-       default y
-       ---help---
-         This enables access to the EDID transferred from the firmware.
-	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
-	 transfers do not work for your driver and if you are using
-	 nvidiafb, i810fb or savagefb.
-
-	 In general, choosing Y for this option is safe.  If you
-	 experience extremely long delays while booting before you get
-	 something on your display, try setting this to N.  Matrox cards in
-	 combination with certain motherboards and monitors are known to
-	 suffer from this problem.
+if SYSFS
+	source "drivers/video/backlight/Kconfig"
+endif
 
 config FB
 	tristate "Support for frame buffer devices"
@@ -53,9 +42,27 @@ config FB
 	  (e.g. an accelerated X server) and that are not frame buffer
 	  device-aware may cause unexpected results. If unsure, say N.
 
+config FIRMWARE_EDID
+       bool "Enable firmware EDID"
+       depends on FB
+       default n
+       ---help---
+         This enables access to the EDID transferred from the firmware.
+	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+	 transfers do not work for your driver and if you are using
+	 nvidiafb, i810fb or savagefb.
+
+	 In general, choosing Y for this option is safe.  If you
+	 experience extremely long delays while booting before you get
+	 something on your display, try setting this to N.  Matrox cards in
+	 combination with certain motherboards and monitors are known to
+	 suffer from this problem.
+
 config FB_DDC
        tristate
-       depends on FB && I2C && I2C_ALGOBIT
+       depends on FB
+       select I2C_ALGOBIT
+       select I2C
        default n
 
 config FB_CFB_FILLRECT
@@ -126,6 +133,9 @@ config FB_TILEBLITTING
 	 This is particularly important to one driver, matroxfb.  If
 	 unsure, say N.
 
+comment "Frambuffer hardware drivers"
+	depends on FB
+
 config FB_CIRRUS
 	tristate "Cirrus Logic support"
 	depends on FB && (ZORRO || PCI)
@@ -703,6 +713,7 @@ config FB_NVIDIA
 	depends on FB && PCI
 	select I2C_ALGOBIT if FB_NVIDIA_I2C
 	select I2C if FB_NVIDIA_I2C
+	select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -731,8 +742,7 @@ config FB_NVIDIA_I2C
 
 config FB_NVIDIA_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_NVIDIA && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_NVIDIA
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -740,9 +750,8 @@ config FB_NVIDIA_BACKLIGHT
 config FB_RIVA
 	tristate "nVidia Riva support"
 	depends on FB && PCI
-	select I2C_ALGOBIT if FB_RIVA_I2C
-	select I2C if FB_RIVA_I2C
 	select FB_DDC if FB_RIVA_I2C
+	select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -779,8 +788,7 @@ config FB_RIVA_DEBUG
 
 config FB_RIVA_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_RIVA && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_RIVA
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -830,8 +838,6 @@ config FB_I810_GTF
 config FB_I810_I2C
 	bool "Enable DDC Support"
 	depends on FB_I810 && FB_I810_GTF
-	select I2C
-	select I2C_ALGOBIT
 	select FB_DDC
 	help
 
@@ -1021,9 +1027,8 @@ config FB_MATROX_MULTIHEAD
 config FB_RADEON
 	tristate "ATI Radeon display support"
 	depends on FB && PCI
-	select I2C_ALGOBIT if FB_RADEON_I2C
-	select I2C if FB_RADEON_I2C
 	select FB_DDC if FB_RADEON_I2C
+	select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -1053,8 +1058,7 @@ config FB_RADEON_I2C
 
 config FB_RADEON_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_RADEON && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_RADEON
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -1074,6 +1078,7 @@ config FB_ATY128
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
 	select FB_MACMODES if PPC_PMAC
 	help
 	  This driver supports graphics boards with the ATI Rage128 chips.
@@ -1085,8 +1090,7 @@ config FB_ATY128
 
 config FB_ATY128_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_ATY128 && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_ATY128
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -1097,6 +1101,7 @@ config FB_ATY
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
 	select FB_MACMODES if PPC
 	help
 	  This driver supports graphics boards with the ATI Mach64 chips.
@@ -1135,8 +1140,7 @@ config FB_ATY_GX
 
 config FB_ATY_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_ATY && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_ATY
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -1150,8 +1154,6 @@ config FB_S3TRIO
 config FB_SAVAGE
 	tristate "S3 Savage support"
 	depends on FB && PCI && EXPERIMENTAL
-	select I2C_ALGOBIT if FB_SAVAGE_I2C
-	select I2C if FB_SAVAGE_I2C
 	select FB_DDC if FB_SAVAGE_I2C
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
@@ -1646,6 +1648,7 @@ config FB_VIRTUAL
 	  the vfb_enable=1 option.
 
 	  If unsure, say N.
+
 if VT
 	source "drivers/video/console/Kconfig"
 endif
@@ -1654,9 +1657,5 @@ if FB || SGI_NEWPORT_CONSOLE
 	source "drivers/video/logo/Kconfig"
 endif
 
-if SYSFS
-	source "drivers/video/backlight/Kconfig"
-endif
-
 endmenu
 
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 3feddf8..d44b4f9 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2215,7 +2215,7 @@ static int aty128fb_blank(int blank, struct fb_info *fb)
 		return 0;
 
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-	if (machine_is(powermac) && blank)
+	if (blank)
 		aty128_bl_set_power(fb, FB_BLANK_POWERDOWN);
 #endif
 
@@ -2234,7 +2234,7 @@ static int aty128fb_blank(int blank, struct fb_info *fb)
 	}
 
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-	if (machine_is(powermac) && !blank)
+	if (!blank)
 		aty128_bl_set_power(fb, FB_BLANK_UNBLANK);
 #endif
 
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 176f9b8..e379cbd 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2818,7 +2818,7 @@ static int atyfb_blank(int blank, struct fb_info *info)
 		return 0;
 
 #ifdef CONFIG_FB_ATY_BACKLIGHT
-	if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
+	if (blank > FB_BLANK_NORMAL)
 		aty_bl_set_power(info, FB_BLANK_POWERDOWN);
 #elif defined(CONFIG_FB_ATY_GENERIC_LCD)
 	if (par->lcd_table && blank > FB_BLANK_NORMAL &&
@@ -2850,7 +2850,7 @@ static int atyfb_blank(int blank, struct fb_info *info)
 	aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
 
 #ifdef CONFIG_FB_ATY_BACKLIGHT
-	if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
+	if (blank <= FB_BLANK_NORMAL)
 		aty_bl_set_power(info, FB_BLANK_UNBLANK);
 #elif defined(CONFIG_FB_ATY_GENERIC_LCD)
 	if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux