Hi There!
Now, I can imagine a USB slave controller so cheap and/or buggy that it
doesn't check the CRC, but I'd think that most would. Checking a CRC
is hardly a novel challenge.
Do we have any counters in the USB Stack and the drivers which count the
USB transaction errors?
According to some datasheets (i.e. NXP ISP1563) there are bits called
USB Error and USB Error Interrupt" etc.
Are those should be implemented / counted in the driver stack somewhere?
Okay, simple question...
A quick look into ehci.h tells me that the bit inside of the kernel
is propably called STS_ERR and is used i.e. in ehci_dbg.c 's
and printed through dbg_status_buf() and dbg_intr.buf().
Maybe it's sufficient to turn on debugging and turn the
error flag into an error counter just to get an idea if it cumulates?
Just my five cents,
Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technology.com
Phone: +49-89-741518-50
Fax: +49-89-741518-19
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
