Re: [LinuxBIOS] #57: libusb host program for PLX NET20DC debug device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Greg KH <[email protected]> writes:

> On Fri, Dec 01, 2006 at 10:55:48AM -0800, Lu, Yinghai wrote:
>> -----Original Message-----
>> From: Greg KH [mailto:[email protected]] 
>> 
>> >I can do that in about 15 minutes if you give me the device ids for the
>> >usb debug device that you wish to have.
>> 
>> >Or you can also use the generic usb-serial driver today just fine with
>> >no modification.  Have you had a problem with using that option?
>> 
>> We are talking about using USB debug device/EHCI debug port in LinuxBIOS
>> in legacy free PC.
>> Because one AM2+MCP55 MB doesn't have serial port.
>> 
>> I guess Eric is working on USB debug device/EHCI debug port for
>> earlyprintk or printk.
>
> Well, earlyprintk will not work, as you need PCI up and running.

*grin*  I just generated the bootlog below.  So I think I have
it working.  There is a lot of cleanup left and I need some sleep but
it works for me.  I will generate a patch to start the conversation
after I wake up.

> And I have some code that barely works for this already, perhaps Eric
> and I should work together on this :)

Eric


Linux version 2.6.19-rc6devel ([email protected]) (gcc version 4.1.1 2006
0525 (Red Hat 4.1.1-1)) #153 SMP Sun Dec 3 07:56:52 MST 2006
Command line: ro root=LABEL=/ rhgb earlyprintk=dbgp console=tty0 console=ttyS0,1
15200 panic=30
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000009ffd0000 (usable)
 BIOS-e820: 000000009ffd0000 - 000000009ffde000 (ACPI data)
 BIOS-e820: 000000009ffde000 - 00000000a0000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000024c000000 (usable)
end_pfn_map = 2408448
kernel direct mapping tables up to 24c000000 @ 8000-13000
DMI 2.3 present.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 100000-a0000000
SRAT: Node 1 PXM 1 14c000000-24c000000
SRAT: Node 0 PXM 0 100000-14c000000
SRAT: Node 0 PXM 0 0-14c000000
Bootmem setup node 0 0000000000000000-000000014c000000
Bootmem setup node 1 000000014c000000-000000024c000000
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  2408448
early_node_map[4] active PFN ranges
    0:        0 ->      159
    0:      256 ->   655312
    0:  1048576 ->  1359872
    1:  1359872 ->  2408448
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xdfefc000] gsi_base[24])
IOAPIC[1]: apic_id 5, address 0xdfefc000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e6000
Nosave address range: 00000000000e6000 - 0000000000100000
Nosave address range: 000000009ffd0000 - 000000009ffde000
Nosave address range: 000000009ffde000 - 00000000a0000000
Nosave address range: 00000000a0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec01000
Nosave address range: 00000000fec01000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ff780000
Nosave address range: 00000000ff780000 - 0000000100000000
Allocating PCI resources starting at a8000000 (gap: a0000000:5ec00000)
PERCPU: Allocating 66560 bytes of per cpu data
Built 2 zonelists.  Total pages: 1960348
Kernel command line: ro root=LABEL=/ rhgb earlyprintk=dbgp console=tty0 console=
ttyS0,115200 panic=30
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
disabling early console
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux