Re: 2.6.18-mm2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 28/09/06, Andrew Morton <[email protected]> wrote:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18/2.6.18-mm2/



=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.18-mm2 #1
-------------------------------------------------------
nash/1264 is trying to acquire lock:
(&bdev_part_lock_key){--..}, at: [<c0310d4a>] mutex_lock+0x1c/0x1f

but task is already holding lock:
(&new->reconfig_mutex){--..}, at: [<c03108ff>]
mutex_lock_interruptible+0x1c/0x1f

which lock already depends on the new lock.


the existing dependency chain (in reverse order) is:

-> #2 (&new->reconfig_mutex){--..}:
      [<c01390b8>] add_lock_to_list+0x5c/0x7a
      [<c013b1dd>] __lock_acquire+0x9f3/0xaef
      [<c013b643>] lock_acquire+0x71/0x91
      [<c031068f>] __mutex_lock_interruptible_slowpath+0xd2/0x326
      [<c03108ff>] mutex_lock_interruptible+0x1c/0x1f
      [<c02ba4e3>] md_open+0x28/0x5d
      [<c0197853>] do_open+0x8b/0x377
      [<c0197cd5>] blkdev_open+0x1d/0x46
      [<c0172f36>] __dentry_open+0x133/0x260
      [<c01730d1>] nameidata_to_filp+0x1c/0x2e
      [<c0173111>] do_filp_open+0x2e/0x35
      [<c0173170>] do_sys_open+0x58/0xde
      [<c0173222>] sys_open+0x16/0x18
      [<c0103297>] syscall_call+0x7/0xb
      [<ffffffff>] 0xffffffff

-> #1 (&bdev->bd_mutex){--..}:
      [<c01390b8>] add_lock_to_list+0x5c/0x7a
      [<c013b1dd>] __lock_acquire+0x9f3/0xaef
      [<c013b643>] lock_acquire+0x71/0x91
      [<c0310b0f>] __mutex_lock_slowpath+0xd2/0x2f1
      [<c0310d4a>] mutex_lock+0x1c/0x1f
      [<c0197824>] do_open+0x5c/0x377
      [<c0197bab>] blkdev_get+0x6c/0x77
      [<c01978d0>] do_open+0x108/0x377
      [<c0197bab>] blkdev_get+0x6c/0x77
      [<c0197eb1>] open_by_devnum+0x30/0x3c
      [<c0147419>] swsusp_check+0x14/0xc5
      [<c0145865>] software_resume+0x7e/0x100
      [<c010049e>] init+0x121/0x29f
      [<c0103f23>] kernel_thread_helper+0x7/0x10
      [<c0109523>] save_stack_trace+0x17/0x30
      [<c0138fb0>] save_trace+0x4f/0xfb
      [<c01390b8>] add_lock_to_list+0x5c/0x7a
      [<c013b1dd>] __lock_acquire+0x9f3/0xaef
      [<c013b643>] lock_acquire+0x71/0x91
      [<c0310b0f>] __mutex_lock_slowpath+0xd2/0x2f1
      [<c0310d4a>] mutex_lock+0x1c/0x1f
      [<c0197824>] do_open+0x5c/0x377
      [<c0197bab>] blkdev_get+0x6c/0x77
      [<c01978d0>] do_open+0x108/0x377
      [<c0197bab>] blkdev_get+0x6c/0x77
      [<c0197eb1>] open_by_devnum+0x30/0x3c
      [<c0147419>] swsusp_check+0x14/0xc5
      [<c0145865>] software_resume+0x7e/0x100
      [<c010049e>] init+0x121/0x29f
      [<c0103f23>] kernel_thread_helper+0x7/0x10
      [<ffffffff>] 0xffffffff

-> #0 (&bdev_part_lock_key){--..}:
      [<c013a7b6>] print_circular_bug_tail+0x30/0x64
      [<c013b114>] __lock_acquire+0x92a/0xaef
      [<c013b643>] lock_acquire+0x71/0x91
      [<c0310b0f>] __mutex_lock_slowpath+0xd2/0x2f1
      [<c0310d4a>] mutex_lock+0x1c/0x1f
      [<c0197323>] bd_claim_by_disk+0x5f/0x18e
      [<c02b44ec>] bind_rdev_to_array+0x1f0/0x20e
      [<c02b6453>] autostart_arrays+0x24b/0x322
      [<c02b9158>] md_ioctl+0x91/0x13f4
      [<c01ea5bc>] blkdev_driver_ioctl+0x49/0x5b
      [<c01ead23>] blkdev_ioctl+0x755/0x7a2
      [<c0196f9d>] block_ioctl+0x16/0x1b
      [<c01801d2>] do_ioctl+0x22/0x67
      [<c0180460>] vfs_ioctl+0x249/0x25c
      [<c01804ba>] sys_ioctl+0x47/0x75
      [<c0103297>] syscall_call+0x7/0xb
      [<ffffffff>] 0xffffffff

other info that might help us debug this:

1 lock held by nash/1264:
#0:  (&new->reconfig_mutex){--..}, at: [<c03108ff>]
mutex_lock_interruptible+0x1c/0x1f
stack backtrace:
[<c0104215>] dump_trace+0x64/0x1cd
[<c0104390>] show_trace_log_lvl+0x12/0x25
[<c01049e5>] show_trace+0xd/0x10
[<c0104aad>] dump_stack+0x19/0x1b
[<c013a7df>] print_circular_bug_tail+0x59/0x64
[<c013b114>] __lock_acquire+0x92a/0xaef
[<c013b643>] lock_acquire+0x71/0x91
[<c0310b0f>] __mutex_lock_slowpath+0xd2/0x2f1
[<c0310d4a>] mutex_lock+0x1c/0x1f
[<c0197323>] bd_claim_by_disk+0x5f/0x18e
[<c02b44ec>] bind_rdev_to_array+0x1f0/0x20e
[<c02b6453>] autostart_arrays+0x24b/0x322
[<c02b9158>] md_ioctl+0x91/0x13f4
[<c01ea5bc>] blkdev_driver_ioctl+0x49/0x5b
[<c01ead23>] blkdev_ioctl+0x755/0x7a2
[<c0196f9d>] block_ioctl+0x16/0x1b
[<c01801d2>] do_ioctl+0x22/0x67
[<c0180460>] vfs_ioctl+0x249/0x25c
[<c01804ba>] sys_ioctl+0x47/0x75
[<c0103297>] syscall_call+0x7/0xb
DWARF2 unwinder stuck at syscall_call+0x7/0xb

Leftover inexact backtrace:

=======================
md: bind<hdb2>

config & dmesg http://www.stardust.webpages.pl/files/mm/2.6.18-mm2/

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux