From: Jean Delvare <[email protected]>
Date: Sun, Sep 10, 2006 at 12:02:45AM +0200
> Hi Andrew, Jurriaan, Antonino,
>
> So my guess is that Jurriaan's graphics adapter is supported by the
> savagefb driver, but the driver doesn't create an i2c bus for it
> (either because the hardware doesn't have it, or we simply have no
> support.) Jurriaan, please confirm that your adapter is not one of
> Savage4, Savage2000, ProSavagePM, ProSavage8.
lspci calls it 'S3 Inc. SuperSavage IX/C SDR (rev 05)'
>
> If my analysis is correct, the following patch should fix the problem.
> It can probably be optimized/cleaned up, but I'll leave that to
> Antonino. Jurriaan, can you please apply this patch on top of
> 2.6.18-rc6-mm1 and report success or failure?
This patch fixes my problems, rc6-mm1 boots without problems even with
the savagefb driver builtin.
Thanks,
Jurriaan
--
Genius untempered by ethics is a deadly commodity.
Iain Irvine - A Shadow on the Glass
Debian (Unstable) GNU/Linux 2.6.18-rc4-mm3 4423 bogomips load 0.04
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
