Re: [PATCH] FRV: Use the generic IRQ stuff

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Benjamin Herrenschmidt <[email protected]> wrote:

> > +	.end		= frv_fpga_end,
> > +};
> 
> Why do you have a end() handler ? (and an empty one....) Your FPGA
> interrupts ase using the level generic flow handler right ? That doesn't
> call end(). Though you might want to have a mask_ack() "combined"
> callback to avoid two indirect calls (it's an optional optimisation). 

This is called unconditionally from __do_IRQ().  It's also not listed in
genericirq.tmpl, though ack(), mask(), etc. are.  The header file (irq.h)
doesn't say that it is optional, though it does say that startup(), shutdown(),
etc. are, therefore the assumption would be that it isn't optional.

> Ahem... __do_IRQ()... That's probably part of your bloat... With a
> conversion to genirq, you shouldn't use __do_IRQ() anymore (and thus it
> shouldn't be compiled in). In fact, that defeats genirq completely as
> you aren't calling the new handlers at all there. You should call
> generic_handle_irq() instead.

It's not mentioned in the docs:

	warthog>grep generic_handle_irq Documentation/DocBook/genericirq.tmpl 
	warthog1>

Looking at the code itself, generic_handle_irq() is a wrapper around
__do_IRQ():

	static inline void generic_handle_irq(unsigned int irq,
					      struct pt_regs *regs)
	{
		struct irq_desc *desc = irq_desc + irq;

		if (likely(desc->handle_irq))
			desc->handle_irq(irq, desc, regs);
		else
			__do_IRQ(irq, regs);
	}

So I don't see how it can help but make the code larger.  The if-statement in
it can't be optimised down because its condition depends on a value held in
memory and is not subject to compile-time evaluation.

It will make things quicker, probably, since it bypasses __do_IRQ() when
possible, but if it can't, it will make things slower as you'll have this
check, the condition will fail against expectations, and then you'll still have
to do __do_IRQ() anyway.

> > +static struct irqaction fpga_irq[4]  = {
> ...
>  .../...

Can you rephrase your comment?

> > +	setup_irq(IRQ_CPU_EXTERNAL0, &fpga_irq[0]);
> > +	setup_irq(IRQ_CPU_EXTERNAL1, &fpga_irq[1]);
> > +	setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[2]);
> > +	setup_irq(IRQ_CPU_EXTERNAL3, &fpga_irq[3]);
> >  }
> 
> Your approach to cascades might be wrong here. Instead of setting up an
> irq handler, you could just attach a chained flow handler. Much less
> overhead.

That's an undocumented feature:

	warthog>grep -i chain Documentation/DocBook/genericirq.tmpl 
	warthog1>

> > +	.enable		= frv_fpga_enable,
> > +	.disable	= frv_fpga_disable,
> > +	.ack		= frv_fpga_ack,
> > +	.mask		= frv_fpga_disable,
> > +	.unmask		= frv_fpga_enable,
> > +	.end		= frv_fpga_end,
> > +};
> 
> SImilar comments. Also, you are using enable/disable here. Just leave
> them NULL and the generic code will call your mask/unmask.

Hmmm... I see that irq_chip_set_defaults() installs intermediary functions in
the chip ops table for anything it doesn't have.  Surely it'd be better to
require people to fill in the appropriate default functions directly as you
could then make the table const.  That's what you've got documentation for,
right?

> You do that in another one at least... And I have to go now so I can't
> finish reviewing your patch :) But it looks like you aren't properly
> "converting" to the genirq code and thus not getting all of the benefit,
> like faster code path to cascade handlers, etc... and you aren't getting
> rid of __do_IRQ() so at the end of the day, you aren't using the new
> stuff and still link in the old one :)

Documentation/DocBook/genericirq.tmpl doesn't do a very good job of explaining
it.  The comments in include/linux/irq.h also need a check as some of them are
out of date.

Take the comment at the head of struct irq_desc for example, it mentions fields
that are absent in the structure, the HTML doc generator spits out warnings in
relation to linux/irq.h.

I would also recommend that a line be added to the banner comments at the top
of linux/irq.h to point to the documentation, just like is done in the .c files
implementing genirq.

David
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux