"Jesse Brandeburg" <[email protected]> wrote:
>
> >
> > I guess it has to be dying in timekeeping_init(). Have you tried
> > earlyprintk=vga or, better, earlyprintk=serial,ttyS0,9600?
>
> wish you would have said that earlier, i looked in
> kernel-parameters.txt and didn't find earlyprinkt when searching for
> debug :-(
sorry.
> two traces follow, one with the stock 2.6.17-mm4 kernel and the other
> with the bisect kernel.
>
>
> Linux version 2.6.17-mm4-jesse ([email protected]) (gcc version 3.
> 4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Thu Jun 29 08:53:59 PDT 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ebaf0 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005ffd0000 (usable)
> BIOS-e820: 000000005ffd0000 - 000000005ffdf000 (ACPI data)
> BIOS-e820: 000000005ffdf000 - 0000000060000000 (ACPI NVS)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> kernel direct mapping tables up to 100000000 @ 8000-d000
> DMI not present or invalid.
> No NUMA configuration found
> Faking a node at 0000000000000000-000000005ffd0000
> Bootmem setup node 0 0000000000000000-000000005ffd0000
> ACPI: PM-Timer IO Port: 0x408
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:3 APIC version 20
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
> Processor #6 15:3 APIC version 20
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
> Processor #1 15:3 APIC version 20
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
> Processor #7 15:3 APIC version 20
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
> IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
> ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
> IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> Setting APIC routing to flat
> ACPI: HPET id: 0x8086a202 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
> Built 1 zonelists. Total pages: 386918
> Kernel command line: ro root=LABEL=/1 rhgb hdc=none video=atyfb:1024x768M-32@70
> console=ttyS0,115200n8 console=tty1 panic=30 earlyprintk=serial,ttyS0,115200 ini
> tcall_debug debug
> ide_setup: hdc=none
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
> time.c: Detected 3600.267 MHz processor.
> Unable to handle kernel NULL pointer dereference at 0000000000000034 RIP:
> [<ffffffff8103396a>] do_timer+0x40/0x556
> PGD 0
> Oops: 0000 [1] SMP
> last sysfs file:
> CPU 0
> Modules linked in:
> Pid: 0, comm: swapper Not tainted 2.6.17-mm4-jesse #1
> RIP: 0010:[<ffffffff8103396a>] [<ffffffff8103396a>] do_timer+0x40/0x556
> RSP: 0018:ffffffff8130ce80 EFLAGS: 00010002
> RAX: 0000000000000000 RBX: 000000000036ef8b RCX: 0000005135618814
> RDX: 0000000000000000 RSI: 00000000001233fd RDI: ffffffff813adec8
> RBP: 0000000000000000 R08: 00000000fffffffe R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000019fb
> R13: 0000000000000000 R14: ffffffff813adec8 R15: ffffffff813adec8
> FS: 0000000000000000(0000) GS:ffffffff813a0000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000034 CR3: 0000000001001000 CR4: 00000000000006a0
> Process swapper (pid: 0, threadinfo ffffffff813ac000, task ffffffff8128be00)
> Stack: 0000000000000000 0000000000000000 0000000000000001 0000000000000000
> 0000000000000000 000000000036ef8b 0000000000000000 00000000000019fb
> 0000000000000000 ffffffff813adec8 ffffffff813adec8 ffffffff8100d442
> Call Trace:
> <IRQ> [<ffffffff8100d442>] main_timer_handler+0x1ed/0x3ad
> [<ffffffff8100d614>] timer_interrupt+0x12/0x27
> [<ffffffff8105076a>] handle_IRQ_event+0x29/0x5a
> [<ffffffff81050837>] __do_IRQ+0x9c/0xfd
> [<ffffffff8100bf27>] do_IRQ+0x63/0x71
> [<ffffffff810098b8>] ret_from_intr+0x0/0xa
> <EOI>
Right. This kernel presumably has the shiny new stack unwinding code
enabled, so we didn't get half the backtrace (dammit). Are you able to
recall whether the 2.6.17-mm4 build had CONFIG_UNWIND_INFO enabled?
> Code: 8b 4a 34 48 d3 e0 48 01 42 58 48 8b 2d b5 3b 31 00 4c 8b 6d
> RIP [<ffffffff8103396a>] do_timer+0x40/0x556
> RSP <ffffffff8130ce80>
> CR2: 0000000000000034
> <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
>
> and with the bisect kernel, slightly different
> Bootdata ok (command line is ro root=LABEL=/1 rhgb hdc=none video=atyfb:1024x768
> M-32@70 console=ttyS0,115200n8 console=tty1 panic=30 earlyprintk=serial,ttyS0,11
> 5200 initcall_debug debug)
> Linux version 2.6.17-bisect ([email protected]) (gcc version 3.4.4
> 20050721 (Red Hat 3.4.4-2)) #15 SMP Fri Jun 30 16:09:50 PDT 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ebaf0 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005ffd0000 (usable)
> BIOS-e820: 000000005ffd0000 - 000000005ffdf000 (ACPI data)
> BIOS-e820: 000000005ffdf000 - 0000000060000000 (ACPI NVS)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> kernel direct mapping tables up to 100000000 @ 8000-8000
> DMI not present or invalid.
> ACPI: PM-Timer IO Port: 0x408
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:3 APIC version 20
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
> Processor #6 15:3 APIC version 20
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
> Processor #1 15:3 APIC version 20
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
> Processor #7 15:3 APIC version 20
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
> IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
> ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
> IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> Setting APIC routing to flat
> ACPI: HPET id: 0x8086a202 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
> Checking aperture...
> Built 1 zonelists. Total pages: 385592
> Kernel command line: ro root=LABEL=/1 rhgb hdc=none video=atyfb:1024x768M-32@70
> console=ttyS0,115200n8 console=tty1 panic=30 earlyprintk=serial,ttyS0,115200 ini
> tcall_debug debug
> ide_setup: hdc=none
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
> time.c: Detected 3600.266 MHz processor.
> Unable to handle kernel NULL pointer dereference at 0000000000000020 RIP:
> <ffffffff80236e71>{do_timer+49}
> PGD 0
> Oops: 0000 [1] SMP
> CPU 0
> Modules linked in:
> Pid: 0, comm: swapper Not tainted 2.6.17-bisect #15
> RIP: 0010:[<ffffffff80236e71>] <ffffffff80236e71>{do_timer+49}
> RSP: 0018:ffffffff80564e98 EFLAGS: 00010002
> RAX: 0000000000000000 RBX: 000000000036ef8a RCX: 00000064e38a4032
> RDX: 0000000000000000 RSI: 00000000001233fe RDI: ffffffff805f3e48
> RBP: ffffffff80564eb8 R08: 0000000000000036 R09: 0000000000000000
> R10: ffffffff805f3e70 R11: 0000000000000000 R12: 0000000000000000
> R13: 00000000000019fa R14: 0000000000000001 R15: ffffffff805f3e48
> FS: 0000000000000000(0000) GS:ffffffff805e5000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000020 CR3: 0000000000201000 CR4: 00000000000006a0
> Process swapper (pid: 0, threadinfo ffffffff805f2000, task ffffffff804adb00)
> Stack: 000000000036ef8a 0000000000000000 00000000000019fa 0000000000000000
> ffffffff80564ef8 ffffffff8020e1c3 0000000000000000 ffffffff804afb00
> 0000000000000000 ffffffff805f3e48
> Call Trace: <IRQ> <ffffffff8020e1c3>{main_timer_handler+547}
> <ffffffff8020e445>{timer_interrupt+21} <ffffffff802569e3>{handle_IRQ_even
> t+51}
> <ffffffff80256ae2>{__do_IRQ+178} <ffffffff8020cd65>{do_IRQ+69}
> <ffffffff8020a1aa>{ret_from_intr+0} <EOI> <ffffffff8043f7b3>{_spin_unlock
> _irqrestore+19}
> <ffffffff80256e8e>{setup_irq+222} <ffffffff805fc33e>{time_init+990}
> <ffffffff805f577a>{start_kernel+250} <ffffffff805f5295>{_sinittext+661}
>
> Code: ff 50 20 4c 8b 2d 3d 2b 36 00 48 8b 15 3e 2b 36 00 49 89 c4
> RIP <ffffffff80236e71>{do_timer+49} RSP <ffffffff80564e98>
> CR2: 0000000000000020
> <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
And this is the traditional backtrace which is actually useful.
You've hit about seventeen bugs all at the same time here :(
- There's something wrong in do_timer(). Everything's been inlined so
it's hard to tell where it oopsed. If you're able to build with
CONFIG_DEBUG_INFO and do
gdb vmlinux
(gdb) l *0xNNNNNNNNN
where NNNNNNNN is the oopsing RIP address then it'll tell us the
file-n-line.
- Somebody enabled local interrupts. The early boot code is _supposed_ to
hold interrupts off until start_kernel() does local_irq_eanble(). But we do
heaps of things which make that unreliable.
We don't know where this happened, and fixing that might make the oops go
away.
<thinks some more>
I suspect that either local interrupts were enabled before you entered
time_init(), or something under time_init() went and enabled interrupts, and
the kernel will crash if it takes a timer interrupt before timekeeping_init()
has run.
As an experiment, try adding a local_irq_disable() in start_kernel(), just
before it calls time_init().
This stuff really really sucks.
One guess would be that something under time_init()->setup_irq() is enabling
interrupts. You could sprinkle
if (!irqs_disabled() printk("%s:%d: BAD", __FILE__, __LINE__);
throughout kernel/irq/manage.c:setup_irq().
Boy we've made a mess in there.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
