Re: [linux-usb-devel] [Fwd: Re: [Linux-usb-users] Fwd: Re: 2.6.17-rc6-mm2 - USB issues]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On Tue, Jun 20, 2006 at 09:21:35PM +1000, Johny wrote:
[...]
> Stock kernels break for me starting with 2.6.17-rc4 (I tested all rcs 
> and also .17 itself), rc3 works a treat for using USB. I suspect the 
> following line missing in dmesg for rc4 is the reason;
> 
> -PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 11

Well, not exactly this line (0000:00:11.1 is the IDE controller, which is
in legacy mode and therefore does not use its PCI interrupt), but the next
similar line is for the USB 2.0 (EHCI) controller:

-PCI: Via IRQ fixup for 0000:00:10.3, from 5 to 10

> See the following dmesg files for details;
> 
> http://www.agotnes.com/kernelStuff/dmesg-2.6.17-rc3-working
> http://www.agotnes.com/kernelStuff/dmesg-2.6.17-rc4-not-working
> 
> And the diff, for convenience;
> 
> http://www.agotnes.com/kernelStuff/diff-rc3_rc4

Try as root:

	setpci -s 00:10.3 INTERRUPT_LINE=0a

(this matches "ehci_hcd 0000:00:10.3: irq 10, ..." in dmesg).

If after doing this USB works again (you will need to replug USB devices),
the missing VIA IRQ quirk is definitely the problem.

> I have a Via chipset motherboard (for my sins), further details 
> available on request, again, for convenience, the lspci;
> 
> http://www.agotnes.com/kernelStuff/lspci

You seem to have also the builtin audio and Ethernet on this board - these
devices may have the same problem, if you tried to use them.

> A couple of possible suspect patches introduced in the changelog for rc4 
> were (with the first one looking particularly interesting, the others 
> less interesting as I go down the list);
> 
> [PATCH] PCI quirk: VIA IRQ fixup should only run for VIA southbridges
> [PATCH] x86_64: avoid IRQ0 ioapic pin collision
> [PATCH] PCI: fix via irq SATA patch
> [ALSA] via82xx - Use DXS_SRC as default for VIA8235/8237/8251 chips
> [ALSA] via82xx: tweak VT8251 workaround
> [ALSA] via82xx: add support for VIA VT8251 (AC'97)
> 
> I'm no kernel hacker, so I'm not sure how I'd isolate this one patch and 
> reverse / modify it. Please let me know how I can progress testing this 
> as I'm currently prevented from using USB with the latest set of kernels 
> on my test server...
> 
> I've got all kernels in the 2.6.17-rc1 through to .17 itself there, plus 
> a variety of mm ones too, so patches against any of those I can very 
> easily test.
> 
> Please keep me cc'd as I'm not on all these lists, thanks :)
> 
> :)Johny
> 
> Johny ?gotnes wrote:
> > didn't go through due to missing vger. ...
> > 
> > ------------------------------------------------------------------------
> > 
> > Subject:
> > Re: [Linux-usb-users] Fwd: Re: 2.6.17-rc6-mm2 - USB issues
> > From:
> > Johny <[email protected]>
> > Date:
> > Sun, 18 Jun 2006 21:37:00 +1000
> > To:
> > Alan Stern <[email protected]>
> > 
> > To:
> > Alan Stern <[email protected]>
> > CC:
> > Johny <[email protected]>, USB development list 
> > <[email protected]>, kernel list 
> > <[email protected]>, [email protected], [email protected]
> > 
> > 
> > All,
> > 
> > I've now tested the following;
> > 
> > 2.6.17-rc6-mm2 with the following patch applied;
> > ---
> > git-acpi.patch from 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc6/2.6.17-rc6-mm2/broken-out/ 
> > 
> > ---
> > 
> > With no difference to the end-result.
> > 
> > Next I stripped out 802.11 generic support and acx111 drivers from the 
> > kernel (including the acpi patches) to check if it clashes, but the same 
> > errors occur....
> > 
> > Thirdly, I booted with acpi=off on the command line with two kernels, 
> > the stock 2.6.17-rc6-mm2 (no acpi patch and including acx111) and the 
> > one including the acpi patch and no acx111, the results were;
> > 
> > acpi_patch;
> > works a treat, picks up USB devices as expected.
> > 
> > stock;
> > works a treat, picks up USB devices as expected, and my acx111 card 
> > works too :)
> > 
> > 
> > Now I'm looking for good suggestions again, this definitely looks like 
> > it is related to ACPI, hence the cc' to that list too, as requested by 
> > Andrew M.
> > 
> > I'm happy to apply patches / config changes as appropriate and for those 
> > who may ask for my .config files, please see;
> > 
> > http://www.agotnes.com/kernelStuff/config-2.6.17-rc6-mm2
> > 
> > http://www.agotnes.com/kernelStuff/config-2.6.17-rc6-mm2git-acpi_patch
> > 
> > Also, I left the output of lspci there for reference;
> > 
> > http://www.agotnes.com/kernelStuff/lspci
> > 
> > Cheers,
> > 
> > :)Johny
> > 
> > Alan Stern wrote:
> >> [Moved to linux-usb-devel in the hope of getting additional help]
> >>
> >> On Thu, 15 Jun 2006, Johny wrote:
> >>
> >>> Alan,
> >>>
> >>> See comments interspersed, thanks for your assistance :)
> >>>
> >>> Alan Stern wrote:
> >>>> On Tue, 13 Jun 2006, Johny wrote:
> >>>>
> >>>>> Is this best suited to this mailing list?
> >>>> It's appropriate.
> >>>>
> >>>>> I tried the kernel list with zero responses (so far ;), let me know 
> >>>>> if there is
> >>>>> anywhere else this should go.
> >>>> ...
> >>>>
> >>>>> Johny ?gotnes wrote:
> >>>>>> All,
> >>>>>>
> >>>>>> My USB hub isn't recognised with the latest -mm series, whereas with
> >>>>>> 2.6.16 vanilla it is picked up & used immediately.
> >>>>>>
> >>>>>> The error I get in dmesg is;
> >>>>>>
> >>>>>> hub 4-0:1.0: USB hub found
> >>>>>> hub 4-0:1.0: 2 ports detected
> >>>>>> usb 1-4: new high speed USB device using ehci_hcd and address 3
> >>>>>> ehci_hcd 0000:00:10.3: Unlink after no-IRQ?  Controller is probably
> >>>>>> using the wrong IRQ.
> >>>> That last line is a clue.  What interrupt numbers are assigned under
> >>>> 2.6.16?  If you unplug the SonyEricsson DCU-11 Cable before booting 
> >>>> (and
> >>>> leave it unplugged), what shows up in /proc/interrupts for both 
> >>>> versions
> >>>> of the kernel?
> >>> See attached, both with the DCU-11 cable disconnected.
> >>
> >> From 2.6.16:
> >>            CPU0         0:      16101          XT-PIC  timer
> >>   1:        148          XT-PIC  i8042
> >>   2:          0          XT-PIC  cascade
> >>   7:          0          XT-PIC  parport0
> >>   9:          0          XT-PIC  acpi
> >>  10:        151          XT-PIC  ehci_hcd:usb1, uhci_hcd:usb4
> >>  11:          0          XT-PIC  uhci_hcd:usb2, uhci_hcd:usb3
> >>  12:        138          XT-PIC  i8042
> >>  14:        172          XT-PIC  ide0
> >>  15:       2458          XT-PIC  ide1
> >> NMI:          0 ERR:          0
> >>
> >> From 2.6.17:
> >>            CPU0         0:      35651    XT-PIC-level    timer
> >>   1:        129    XT-PIC-level    i8042
> >>   2:          0    XT-PIC-level    cascade
> >>   6:          3    XT-PIC-level    floppy
> >>   7:          0    XT-PIC-level    parport0
> >>   9:          0    XT-PIC-level    acpi
> >>  10:          0    XT-PIC-level    ehci_hcd:usb1, uhci_hcd:usb4
> >>  11:       1940    XT-PIC-level    uhci_hcd:usb2, uhci_hcd:usb3, wlan0
> >>  12:        162    XT-PIC-level    i8042
> >>  14:        171    XT-PIC-level    ide0
> >>  15:       4251    XT-PIC-level    ide1
> >> NMI:          0 ERR:          0
> >>
> >> There's nothing obviously wrong.
> >>
> >>>> Most likely this is a problem with the ACPI subsystem, not a USB 
> >>>> problem.
> >>>>
> >>> I guessed USB due to the number of USB changes in the -mm series and, 
> >>> obviously, my USB devices stopped registering, however, I'd not know 
> >>> one from the other ;)
> >>
> >> What happens if you boot with "acpi=off" on the boot command line?
> >>
> >> Alan Stern

Attachment: pgp5TE3wFDgAW.pgp
Description: PGP signature

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux