Host adapter hardware imposes certain restrictions and features on
address ranges. Instead of hard-wiring such ranges into the ieee1394
core or even into protocol drivers, let lowlevel drivers specify
these ranges via struct hpsb_host.
Patch "ohci1394: set address range properties" must be applied too,
else hpsb_allocate_and_register_addrspace() won't work properly.
Signed-off-by: Stefan Richter <[email protected]>
Index: linux-2.6.17-rc5-mm2/drivers/ieee1394/hosts.h
===================================================================
--- linux-2.6.17-rc5-mm2.orig/drivers/ieee1394/hosts.h 2006-06-01 20:55:43.000000000 +0200
+++ linux-2.6.17-rc5-mm2/drivers/ieee1394/hosts.h 2006-06-01 20:55:45.000000000 +0200
@@ -73,6 +73,8 @@ struct hpsb_host {
unsigned int config_roms;
struct list_head addr_space;
+ u64 low_addr_space; /* upper bound of physical DMA area */
+ u64 middle_addr_space; /* upper bound of posted write area */
};
Index: linux-2.6.17-rc5-mm2/drivers/ieee1394/highlevel.c
===================================================================
--- linux-2.6.17-rc5-mm2.orig/drivers/ieee1394/highlevel.c 2006-06-01 20:55:04.000000000 +0200
+++ linux-2.6.17-rc5-mm2/drivers/ieee1394/highlevel.c 2006-06-01 20:55:45.000000000 +0200
@@ -312,8 +312,10 @@ u64 hpsb_allocate_and_register_addrspace
return retval;
}
+ /* default range,
+ * avoids controller's posted write area (see OHCI 1.1 clause 1.5) */
if (start == ~0ULL && end == ~0ULL) {
- start = CSR1212_ALL_SPACE_BASE + 0xffff00000000ULL; /* ohci1394.c limit */
+ start = host->middle_addr_space;
end = CSR1212_ALL_SPACE_END;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]