What's in libata-dev.git

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The 'upstream' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git

contains the following updates (queued for 2.6.18):

 drivers/ide/pci/amd74xx.c         |    7 
 drivers/scsi/Makefile             |    2 
 drivers/scsi/ahci.c               |  436 +++---
 drivers/scsi/ata_piix.c           |   25 
 drivers/scsi/libata-bmdma.c       |  143 ++
 drivers/scsi/libata-core.c        | 2525 ++++++++++++++++++++++++--------------
 drivers/scsi/libata-eh.c          | 1561 +++++++++++++++++++++++
 drivers/scsi/libata-scsi.c        |  408 +++---
 drivers/scsi/libata.h             |   24 
 drivers/scsi/pdc_adma.c           |   10 
 drivers/scsi/sata_mv.c            |   70 -
 drivers/scsi/sata_nv.c            |   13 
 drivers/scsi/sata_promise.c       |   39 
 drivers/scsi/sata_qstor.c         |   14 
 drivers/scsi/sata_sil.c           |   66 
 drivers/scsi/sata_sil24.c         |  615 +++++----
 drivers/scsi/sata_sis.c           |    3 
 drivers/scsi/sata_svw.c           |    5 
 drivers/scsi/sata_sx4.c           |   20 
 drivers/scsi/sata_uli.c           |    3 
 drivers/scsi/sata_via.c           |    3 
 drivers/scsi/sata_vsc.c           |   16 
 drivers/scsi/scsi.c               |   18 
 drivers/scsi/scsi_error.c         |   24 
 drivers/scsi/scsi_lib.c           |    2 
 drivers/scsi/scsi_transport_api.h |    6 
 include/linux/ata.h               |   34 
 include/linux/libata.h            |  386 ++++-
 include/linux/pci_ids.h           |    4 
 include/scsi/scsi_cmnd.h          |    1 
 include/scsi/scsi_host.h          |    1 
 31 files changed, 4764 insertions(+), 1720 deletions(-)

Alan Cox:
      libata: PIO 0
      libata - fix bracketing and DMA oops
      PATCH: libata. Add ->data_xfer method
      ata_piix formatting
      libata: Remove obsolete flag

Albert Lee:
      libata: interrupt driven pio for libata-core
      libata: interrupt driven pio for LLD
      libata irq-pio: add comments and cleanup
      libata irq-pio: rename atapi_packet_task() and comments
      libata irq-pio: simplify if condition in ata_dataout_task()
      libata irq-pio: cleanup ata_qc_issue_prot()
      libata: move atapi_send_cdb() and ata_dataout_task()
      [libata irq-pio] reorganize ata_pio_sector() and __atapi_pio_bytes()
      [libata irq-pio] reorganize "buf + offset" in ata_pio_sector()
      [libata irq-pio] use PageHighMem() to optimize the kmap_atomic() usage
      libata irq-pio: misc fixes
      libata irq-pio: merge the ata_dataout_task workqueue with ata_pio_task workqueue
      libata irq-pio: eliminate unnecessary queuing in ata_pio_first_block()
      libata irq-pio: add read/write multiple support
      libata-dev: determine err_mask when error is found
      libata-dev: filter out noisy ATAPI error messages
      libata-dev: Fix array index value in ata_rwcmd_protocol()
      libata-dev: Use new ata_queue_pio_task() for PIO polling task
      libata-dev: Use new AC_ERR_* flags
      libata-dev: Minor comment fix
      libata-dev: recognize WRITE_MULTI_FUA_EXT for r/w multiple
      libata-dev: Remove trailing whitespaces
      libata-dev: Fix merge problem with upstream
      libata-dev: Remove atapi_packet_task()
      libata-dev: Move out the HSM code from ata_host_intr()
      libata-dev: Minor fix for ata_hsm_move() to work with ata_host_intr()
      libata-dev: Let ata_hsm_move() work with both irq-pio and polling pio
      libata-dev: Convert ata_pio_task() to use the new ata_hsm_move()
      libata-dev: Cleanup unused enums/functions
      libata-dev: ata_check_atapi_dma() fix for ATA_FLAG_PIO_POLLING LLDDs
      libata-dev: Make the the in_wq check as an inline function
      libata-dev: irq-pio minor fixes (respin)
      libata-dev: fix the device err check sequence (respin)
      libata-dev: wait idle after reading the last data block
      libata-dev: print out information for ATAPI devices with CDB interrupts
      libata-dev: handle DRQ=1 ERR=1 (revised)
      libata-dev: irq-pio minor fix
      libata-dev: irq-pio minor fix 2
      libata: convert ATAPI_ENABLE_DMADIR to module parameter
      libata: Fix the HSM error_mask mapping (was: Re: libata-tj and SMART)
      libata: use qc->result_tf for temp taskfile storage
      libata: add pio flush for via atapi (was: Re: TR: ASUS A8V Deluxe, x86_64)
      libata: minor fix for irq-pio merge

Andrew Chew:
      sata_nv: Add MCP61 support

Bastiaan Jacques:
      ahci: add support for VIA VT8251

Jeff Garzik:
      [libata irq-pio] build fix
      [libata pdc_adma] update for removal of ATA_FLAG_NOINTR
      [libata pdc_adma] fix for new irq-driven PIO code
      [libata sata_mv] IRQ PIO build fix
      [libata] irq-pio: fix breakage related to err_mask merge
      [libata sata_promise] irq_pio: fix merge bug
      [libata] build fix after merging some pre-packet_task-removal code
      [libata irq-pio] s/assert/WARN_ON/
      [libata] build fix after cdb_len move
      sata_vsc build fix
      libata: irq-pio build fixes
      [libata] irq-pio: fix build breakage
      [libata] irq-pio: Fix merge mistake
      [libata] kill bogus cut-n-pasted comments in three drivers
      [libata] bump versions
      libata: Fix EH merge difference between this branch and upstream.
      libata: Add helper ata_shost_to_port()
      [libata sata_promise] Add PATA cable detection.
      [libata] libata-scsi, sata_mv: trim trailing whitespace

Luben Tuikov:
      SCSI: Introduce scsi_req_abort_cmd (REPOST)

Mark Lord:
      sata_mv: endian annotations

Tejun Heo:
      libata: increase LBA48 max sectors to 65535
      libata: fix ata_set_mode() return value
      libata: make ata_bus_probe() return negative errno on failure
      libata: separate out ata_spd_string()
      libata: convert do_probe_reset() to ata_do_reset()
      libata: implement ata_dev_enabled and disabled()
      libata: make ata_set_mode() handle no-device case properly
      libata: reorganize ata_set_mode()
      libata: don't disable devices from ata_set_mode()
      libata: preserve SATA SPD setting over hard resets
      libata: implement ata_dev_absent()
      libata: implement ap->sata_spd_limit and helpers
      libata: use SATA speed down in ata_drive_probe_reset()
      libata: add 5s sleep between resets
      libata: implement ata_down_xfermask_limit()
      libata: improve ata_bus_probe()
      libata: consider disabled devices in ata_dev_xfermask()
      libata: report device number when PIO fails
      libata: ata_dev_revalidate() printk update
      libata: ATA_FLAG_IN_EH is not used, kill it
      libata: clean up constants
      libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED
      libata: clear only affected flags during ata_dev_configure()
      libata: clear ATA_DFLAG_PIO before setting it
      libata: add ATA_QCFLAG_IO
      libata: pass qc around intead of ap during PIO
      libata: always generate sense if qc->err_mask is non-zero
      libata: don't read TF directly from sense generation functions
      libata: add @cdb to ata_exec_internal()
      libata: dec scmd->retries for qcs with zero err_mask
      libata: separate out libata-eh.c
      libata: make some libata-core routines extern
      libata: print SControl in SATA link status info message
      ahci: do not fail softreset if PHY reports no device
      libata: set default cbl in probeinit
      libata: kill @verbose from ata_reset_fn_t
      libata: make reset methods complain when they fail
      sata_sil24: fix timeout calculation in sil24_softreset
      sata_sil24: better error message from softreset
      libata: implement ata_wait_register()
      ahci: use ata_wait_register()
      sata_sil24: use ata_wait_register()
      libata: disable failed devices only once in ata_bus_probe()
      libata: cosmetic update to ata_bus_probe()
      libata: export ata_set_sata_spd()
      sata_sil24: typo fix
      sata_sil24: rename PORT_IRQ_SDB_FIS to PORT_IRQ_SDB_NOTIFY
      sata_sil24: add more constants
      sata_sil24: consolidate host flags into SIL24_COMMON_FLAGS
      sata_sil24: implement loss of completion interrupt on PCI-X errta fix
      sata_sil24: implement sil24_init_port()
      sata_sil24: put port into known state before softresetting
      sata_sil24: kill 10ms sleep in softreset
      sata_sil24: reimplement hardreset
      sata_sil24: don't do hardreset during driver initialization
      sata_sil24: fix on-memory structure byteorder
      sata_sil24: enable 64bit
      SCSI: implement shost->host_eh_scheduled
      libata: silly fix in ata_scsi_start_stop_xlat()
      libata: rename ata_down_sata_spd_limit() and friends
      ahci: hardreset classification fix
      libata: unexport ata_scsi_error()
      libata: kill duplicate prototypes
      libata: fix ->phy_reset class code handling in ata_bus_probe()
      libata: clear ap->active_tag atomically w.r.t. command completion
      libata: hold host_set lock while finishing internal qc
      libata: use preallocated buffers
      libata: move ->set_mode() handling into ata_set_mode()
      libata: remove postreset handling from ata_do_reset()
      libata: implement qc->result_tf
      sata_sil24: update TF image only when necessary
      libata: init ap->cbl to ATA_CBL_SATA early
      libata: implement new SCR handling and port on/offline functions
      libata: use new SCR and on/offline functions
      libata: kill old SCR functions and sata_dev_present()
      libata: add dev->ap
      libata: use dev->ap
      libata: implement ATA printk helpers
      libata: use ATA printk helpers
      libata-eh-fw: add flags and operations for new EH
      libata-eh-fw: clear SError in ata_std_postreset()
      libata-eh-fw: use special reserved tag and qc for internal commands
      libata-eh-fw: update ata_qc_from_tag() to enforce normal/EH qc ownership
      libata-eh-fw: implement new EH scheduling via error completion
      libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort()
      libata-eh-fw: implement freeze/thaw
      libata-eh-fw: implement new EH scheduling from PIO
      libata-eh-fw: update ata_scsi_error() for new EH
      libata-eh-fw: update ata_exec_internal() for new EH
      libata-eh-fw: update SCSI command completion path for new EH
      libata-eh: add ATA and libata flags for new EH
      libata-eh: implement dev->ering
      libata-eh: implement ata_eh_info and ata_eh_context
      libata-eh: implement new EH
      libata-eh: implement BMDMA EH
      ata_piix: convert to new EH
      sata_sil: convert to new EH
      ahci: convert to new EH
      ahci: add PIOS interim interrupt handling
      sata_sil24: convert to new EH
      libata: fix irq-pio merge
      libata-ncq: add NCQ related ATA/libata constants and macros
      libata-ncq: pass ata_scsi_translate() return value to SCSI midlayer
      libata-ncq: rename ap->qactive to ap->qc_allocated
      libata-ncq: implement ap->qc_active, ap->sactive and complete helper
      libata-ncq: implement NCQ command translation and exclusion
      libata-ncq: update EH to handle NCQ
      libata-ncq: implement NCQ device configuration
      ahci: clean up AHCI constants in preparation for NCQ
      ahci: add HOST_CAP_NCQ constant
      ahci: kill pp->cmd_tbl_sg
      ahci: implement NCQ suppport
      sata_sil24: implement NCQ support
      libata: enforce default EH actions
      SCSI: make scsi_implement_eh() generic API for SCSI transports

Thomas Glanzmann:
      Add PCI ID for the Intel IDE Controller which is in the Intel Mac Minis shipped in first quarter 2006

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux