On Fri, 2006-03-31 at 10:11 -0800, David Brownell wrote:
> I don't know how your particular hardware works, but if you have a
> real SPI controller it would probably be more natural to have your
> setup() function handle that mode register earlier, out of the main
> transfer loop ... unless that mode register is shared among all
> chipselects, in which case you'd use the setup_transfer() call for
> that, inside the transfer loop. (That call hasn't yet been merged
> into the mainline kernel yet; it's in the MM tree.)
>
Is setup_transfer() a change to framework API or just the bit_bang
driver?
> The chipselect() call should only affect the chipselect signal and,
> when you're activating a chip, its initial clock polarity. Though
> if you're not using the latest from the MM tree, that's also your
> hook for ensuring that the SPI mode is set up right.
>
Ditto?
-Stephen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
