Dear Ingo,
I think I have made a big mistake..
while compiling 2.6.16 kernel with -rt10 patch for ppc, I had faced
compilation errors and replaced the code that cause the errors with
the orijinal (before the patch) ones, and maybe they may cause this
bug. Here is the modification diff file, and I have added compilation
error messages for each modification. If you can correct the errors, I
can test and return you the results again..
Emin
diff -Naur linux-2.6.16-rt10/arch/powerpc/kernel/init_task.c
linux-2.6.16_modif/arch/powerpc/kernel/init_task.c
--- linux-2.6.16-rt10/arch/powerpc/kernel/init_task.c 2006-03-30
15:35:22.000000000 +0300
+++ linux-2.6.16_modif/arch/powerpc/kernel/init_task.c 2006-03-30
15:20:39.000000000 +0300
@@ -7,8 +7,12 @@
#include <linux/mqueue.h>
#include <asm/uaccess.h>
-static struct fs_struct init_fs = INIT_FS(init_fs);
-static struct files_struct init_files = INIT_FILES(init_files);
+//static struct fs_struct init_fs = INIT_FS(init_fs);
+//compiler error message:arch/powerpc/kernel/init_task.c:10: error:
parse error before '(' token
+static struct fs_struct init_fs = INIT_FS;
+//static struct files_struct init_files = INIT_FILES(init_files);
+//compiler error message:arch/powerpc/kernel/init_task.c:11: error:
parse error before '(' token
+static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff -Naur linux-2.6.16-rt10/include/linux/trace_irqflags.h
linux-2.6.16_modif/include/linux/trace_irqflags.h
--- linux-2.6.16-rt10/include/linux/trace_irqflags.h 2006-03-30
15:35:26.000000000 +0300
+++ linux-2.6.16_modif/include/linux/trace_irqflags.h 2006-03-30
15:15:29.000000000 +0300
@@ -11,7 +11,8 @@
#ifndef _LINUX_TRACE_IRQFLAGS_H
#define _LINUX_TRACE_IRQFLAGS_H
-#include <asm/irqflags.h>
+//#include <asm/irqflags.h>
+//compile error message: include/linux/trace_irqflags.h:14:26: error:
asm/irqflags.h: No such file or directory
/*
* The local_irq_*() APIs are equal to the raw_local_irq*()
diff -Naur linux-2.6.16-rt10/arch/ppc/kernel/entry.S
linux-2.6.16_modif/arch/ppc/kernel/entry.S
--- linux-2.6.16-rt10/arch/ppc/kernel/entry.S 2006-03-30
15:35:22.000000000 +0300
+++ linux-2.6.16_modif/arch/ppc/kernel/entry.S 2006-03-30
15:18:14.000000000 +0300
@@ -854,7 +854,11 @@
#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
do_work: /* r10 contains MSR_KERNEL here */
- andi. r0,r9,(_TIF_NEED_RESCHED|_TIF_NEED_RESCHED_DELAYED)
+/* andi. r0,r9,(_TIF_NEED_RESCHED|_TIF_NEED_RESCHED_DELAYED)*/
+/*compile error message:
+arch/ppc/kernel/entry.S:857: Error: operand out of range (0x00010008
is not between 0x00000000 and 0x0000ffff)*/
+ andi. r0,r9,(_TIF_NEED_RESCHED)
+
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
@@ -868,7 +872,10 @@
MTMSRD(r10) /* disable interrupts */
rlwinm r9,r1,0,0,18
lwz r9,TI_FLAGS(r9)
- andi. r0,r9,(_TIF_NEED_RESCHED|_TIF_NEED_RESCHED_DELAYED)
+/* andi. r0,r9,(_TIF_NEED_RESCHED|_TIF_NEED_RESCHED_DELAYED)*/
+/*compile error message:
+arch/ppc/kernel/entry.S:871: Error: operand out of range (0x00010008
is not between 0x00000000 and 0x0000ffff)*/
+ andi. r0,r9,(_TIF_NEED_RESCHED)
bne- do_resched
andi. r0,r9,_TIF_SIGPENDING
beq restore_user
2006/3/30, Ingo Molnar <[email protected]>:
>
> * emin ak <[email protected]> wrote:
>
> > Soryy fot the late answer. I have change the driver to use
> > SA_INTERRUPT, OOM messages disappeared but the ethernet throughput
> > decreased significantly as Kumar said before(90MBit for 1518Byte
> > packet, and throughput without the patch is about 900Bits) and the
> > system can't manage load balancing between to interfaces,the system
> > acts like the priorty of tsec0 (eth0) is higher then tsec1 because of
> > this, under heavy load on tsec0 blocks packet receiving on tsec1
> > (eth1). And also I have tried Nick solution, increased
> > /proc/sys/vm/min_free_kbytes to 10MB, the result did'nt changed, OOM
> > messages was repeated again.
> > I'll try Ingo patch immediately and and report you the results.
>
> well, if SA_INTERRUPT made a difference then you are likely not running
> PREEMPT_RT nor PREEMPT_HARDIRQS. Could you send me your .config?
>
> Ingo
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
