On Sun, Mar 26, 2006 at 09:12:30PM -0500, Pete Clements wrote:
> Reported this earlier as a 3c509 card in error, should
> have been 3c900 (3c59x driver).
>
> FYI:
> Single 3c900 card, UP i386
> Lost networking with .16-git12, message
> ADDRCONF(NETDEV_UP): eth0: link is not ready
This could be due to the recent driver update.
I can not reproduce this with a 3c900B-Combo,
so I need some more information to track it down.
> Had several of these with git11
> NETDEV WATCHDOG: eth0: transmit timed out
Is this for sure that these messages occured first time with git11?
There were no changes in the 3c59x driver between git10 and git11.
>
> No problems observed git1-git10
>
If you are willing to provide me with some information
you can send the following:
1. output of lspci -vvv (just the ethernet controller related part)
2. your Kernel configuration
3. modprobe the driver with debug=4 and send
the 3c59x related lines of your logs for both, git11 and git12.
(From driver startup about 15 seconds should be sufficiant for now)
4. the output of "vortex-diag -aem" and "mii-diag".
You can find these tools at http://www.scyld.com/ethercard_diag.html
Steffen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
