Add driver support for general purpose I/O feature
of the Synclink GT adapters.
Signed-off-by: Paul Fulghum <[email protected]>
--- linux-2.6.16/drivers/char/synclink_gt.c 2006-03-19 23:53:29.000000000 -0600
+++ b/drivers/char/synclink_gt.c 2006-03-24 09:43:42.000000000 -0600
@@ -1,5 +1,5 @@
/*
- * $Id: synclink_gt.c,v 4.22 2006/01/09 20:16:06 paulkf Exp $
+ * $Id: synclink_gt.c,v 4.25 2006/02/06 21:20:33 paulkf Exp $
*
* Device driver for Microgate SyncLink GT serial adapters.
*
@@ -92,7 +92,7 @@
* module identification
*/
static char *driver_name = "SyncLink GT";
-static char *driver_version = "$Revision: 4.22 $";
+static char *driver_version = "$Revision: 4.25 $";
static char *tty_driver_name = "synclink_gt";
static char *tty_dev_prefix = "ttySLG";
MODULE_LICENSE("GPL");
@@ -188,6 +188,20 @@ static void hdlcdev_exit(struct slgt_inf
#define SLGT_REG_SIZE 256
/*
+ * conditional wait facility
+ */
+struct cond_wait {
+ struct cond_wait *next;
+ wait_queue_head_t q;
+ wait_queue_t wait;
+ unsigned int data;
+};
+static void init_cond_wait(struct cond_wait *w, unsigned int data);
+static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
+static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
+static void flush_cond_wait(struct cond_wait **head);
+
+/*
* DMA buffer descriptor and access macros
*/
struct slgt_desc
@@ -269,6 +283,9 @@ struct slgt_info {
struct timer_list tx_timer;
struct timer_list rx_timer;
+ unsigned int gpio_present;
+ struct cond_wait *gpio_wait_q;
+
spinlock_t lock; /* spinlock for synchronizing with ISR */
struct work_struct task;
@@ -379,6 +396,11 @@ static MGSL_PARAMS default_params = {
#define MASK_OVERRUN BIT4
#define GSR 0x00 /* global status */
+#define JCR 0x04 /* JTAG control */
+#define IODR 0x08 /* GPIO direction */
+#define IOER 0x0c /* GPIO interrupt enable */
+#define IOVR 0x10 /* GPIO value */
+#define IOSR 0x14 /* GPIO interrupt status */
#define TDR 0x80 /* tx data */
#define RDR 0x80 /* rx data */
#define TCR 0x82 /* tx control */
@@ -503,6 +525,9 @@ static int tiocmset(struct tty_struct *
static void set_break(struct tty_struct *tty, int break_state);
static int get_interface(struct slgt_info *info, int __user *if_mode);
static int set_interface(struct slgt_info *info, int if_mode);
+static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
+static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
+static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
/*
* driver functions
@@ -1112,6 +1137,12 @@ static int ioctl(struct tty_struct *tty,
return get_interface(info, argp);
case MGSL_IOCSIF:
return set_interface(info,(int)arg);
+ case MGSL_IOCSGPIO:
+ return set_gpio(info, argp);
+ case MGSL_IOCGGPIO:
+ return get_gpio(info, argp);
+ case MGSL_IOCWAITGPIO:
+ return wait_gpio(info, argp);
case TIOCGICOUNT:
spin_lock_irqsave(&info->lock,flags);
cnow = info->icount;
@@ -2158,6 +2189,24 @@ static void isr_txeom(struct slgt_info *
}
}
+static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
+{
+ struct cond_wait *w, *prev;
+
+ /* wake processes waiting for specific transitions */
+ for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
+ if (w->data & changed) {
+ w->data = state;
+ wake_up_interruptible(&w->q);
+ if (prev != NULL)
+ prev->next = w->next;
+ else
+ info->gpio_wait_q = w->next;
+ } else
+ prev = w;
+ }
+}
+
/* interrupt service routine
*
* irq interrupt number
@@ -2193,6 +2242,22 @@ static irqreturn_t slgt_interrupt(int ir
}
}
+ if (info->gpio_present) {
+ unsigned int state;
+ unsigned int changed;
+ while ((changed = rd_reg32(info, IOSR)) != 0) {
+ DBGISR(("%s iosr=%08x\n", info->device_name, changed));
+ /* read latched state of GPIO signals */
+ state = rd_reg32(info, IOVR);
+ /* clear pending GPIO interrupt bits */
+ wr_reg32(info, IOSR, changed);
+ for (i=0 ; i < info->port_count ; i++) {
+ if (info->port_array[i] != NULL)
+ isr_gpio(info->port_array[i], changed, state);
+ }
+ }
+ }
+
for(i=0; i < info->port_count ; i++) {
struct slgt_info *port = info->port_array[i];
@@ -2276,6 +2341,8 @@ static void shutdown(struct slgt_info *i
set_signals(info);
}
+ flush_cond_wait(&info->gpio_wait_q);
+
spin_unlock_irqrestore(&info->lock,flags);
if (info->tty)
@@ -2650,6 +2717,175 @@ static int set_interface(struct slgt_inf
return 0;
}
+/*
+ * set general purpose IO pin state and direction
+ *
+ * user_gpio fields:
+ * state each bit indicates a pin state
+ * smask set bit indicates pin state to set
+ * dir each bit indicates a pin direction (0=input, 1=output)
+ * dmask set bit indicates pin direction to set
+ */
+static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
+{
+ unsigned long flags;
+ struct gpio_desc gpio;
+ __u32 data;
+
+ if (!info->gpio_present)
+ return -EINVAL;
+ if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
+ return -EFAULT;
+ DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
+ info->device_name, gpio.state, gpio.smask,
+ gpio.dir, gpio.dmask));
+
+ spin_lock_irqsave(&info->lock,flags);
+ if (gpio.dmask) {
+ data = rd_reg32(info, IODR);
+ data |= gpio.dmask & gpio.dir;
+ data &= ~(gpio.dmask & ~gpio.dir);
+ wr_reg32(info, IODR, data);
+ }
+ if (gpio.smask) {
+ data = rd_reg32(info, IOVR);
+ data |= gpio.smask & gpio.state;
+ data &= ~(gpio.smask & ~gpio.state);
+ wr_reg32(info, IOVR, data);
+ }
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ return 0;
+}
+
+/*
+ * get general purpose IO pin state and direction
+ */
+static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
+{
+ struct gpio_desc gpio;
+ if (!info->gpio_present)
+ return -EINVAL;
+ gpio.state = rd_reg32(info, IOVR);
+ gpio.smask = 0xffffffff;
+ gpio.dir = rd_reg32(info, IODR);
+ gpio.dmask = 0xffffffff;
+ if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
+ return -EFAULT;
+ DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
+ info->device_name, gpio.state, gpio.dir));
+ return 0;
+}
+
+/*
+ * conditional wait facility
+ */
+static void init_cond_wait(struct cond_wait *w, unsigned int data)
+{
+ init_waitqueue_head(&w->q);
+ init_waitqueue_entry(&w->wait, current);
+ w->data = data;
+}
+
+static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
+{
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&w->q, &w->wait);
+ w->next = *head;
+ *head = w;
+}
+
+static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
+{
+ struct cond_wait *w, *prev;
+ remove_wait_queue(&cw->q, &cw->wait);
+ set_current_state(TASK_RUNNING);
+ for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
+ if (w == cw) {
+ if (prev != NULL)
+ prev->next = w->next;
+ else
+ *head = w->next;
+ break;
+ }
+ }
+}
+
+static void flush_cond_wait(struct cond_wait **head)
+{
+ while (*head != NULL) {
+ wake_up_interruptible(&(*head)->q);
+ *head = (*head)->next;
+ }
+}
+
+/*
+ * wait for general purpose I/O pin(s) to enter specified state
+ *
+ * user_gpio fields:
+ * state - bit indicates target pin state
+ * smask - set bit indicates watched pin
+ *
+ * The wait ends when at least one watched pin enters the specified
+ * state. When 0 (no error) is returned, user_gpio->state is set to the
+ * state of all GPIO pins when the wait ends.
+ *
+ * Note: Each pin may be a dedicated input, dedicated output, or
+ * configurable input/output. The number and configuration of pins
+ * varies with the specific adapter model. Only input pins (dedicated
+ * or configured) can be monitored with this function.
+ */
+static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
+{
+ unsigned long flags;
+ int rc = 0;
+ struct gpio_desc gpio;
+ struct cond_wait wait;
+ u32 state;
+
+ if (!info->gpio_present)
+ return -EINVAL;
+ if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
+ return -EFAULT;
+ DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
+ info->device_name, gpio.state, gpio.smask));
+ /* ignore output pins identified by set IODR bit */
+ if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
+ return -EINVAL;
+ init_cond_wait(&wait, gpio.smask);
+
+ spin_lock_irqsave(&info->lock, flags);
+ /* enable interrupts for watched pins */
+ wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
+ /* get current pin states */
+ state = rd_reg32(info, IOVR);
+
+ if (gpio.smask & ~(state ^ gpio.state)) {
+ /* already in target state */
+ gpio.state = state;
+ } else {
+ /* wait for target state */
+ add_cond_wait(&info->gpio_wait_q, &wait);
+ spin_unlock_irqrestore(&info->lock, flags);
+ schedule();
+ if (signal_pending(current))
+ rc = -ERESTARTSYS;
+ else
+ gpio.state = wait.data;
+ spin_lock_irqsave(&info->lock, flags);
+ remove_cond_wait(&info->gpio_wait_q, &wait);
+ }
+
+ /* disable all GPIO interrupts if no waiting processes */
+ if (info->gpio_wait_q == NULL)
+ wr_reg32(info, IOER, 0);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
+ rc = -EFAULT;
+ return rc;
+}
+
static int modem_input_wait(struct slgt_info *info,int arg)
{
unsigned long flags;
@@ -3166,8 +3402,10 @@ static void device_init(int adapter_num,
} else {
port_array[0]->irq_requested = 1;
adapter_test(port_array[0]);
- for (i=1 ; i < port_count ; i++)
+ for (i=1 ; i < port_count ; i++) {
port_array[i]->init_error = port_array[0]->init_error;
+ port_array[i]->gpio_present = port_array[0]->gpio_present;
+ }
}
}
}
@@ -4301,7 +4539,7 @@ static int register_test(struct slgt_inf
break;
}
}
-
+ info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
info->init_error = rc ? 0 : DiagStatus_AddressFailure;
return rc;
}
--- linux-2.6.16/include/linux/synclink.h 2006-03-19 23:53:29.000000000 -0600
+++ b/include/linux/synclink.h 2006-03-24 09:52:55.000000000 -0600
@@ -1,7 +1,7 @@
/*
* SyncLink Multiprotocol Serial Adapter Driver
*
- * $Id: synclink.h,v 3.10 2005/11/08 19:50:54 paulkf Exp $
+ * $Id: synclink.h,v 3.11 2006/02/06 21:20:29 paulkf Exp $
*
* Copyright (C) 1998-2000 by Microgate Corporation
*
@@ -221,6 +221,12 @@ struct mgsl_icount {
__u32 rxidle;
};
+struct gpio_desc {
+ __u32 state;
+ __u32 smask;
+ __u32 dir;
+ __u32 dmask;
+};
#define DEBUG_LEVEL_DATA 1
#define DEBUG_LEVEL_ERROR 2
@@ -276,5 +282,8 @@ struct mgsl_icount {
#define MGSL_IOCLOOPTXDONE _IO(MGSL_MAGIC_IOC,9)
#define MGSL_IOCSIF _IO(MGSL_MAGIC_IOC,10)
#define MGSL_IOCGIF _IO(MGSL_MAGIC_IOC,11)
+#define MGSL_IOCSGPIO _IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
+#define MGSL_IOCGGPIO _IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
+#define MGSL_IOCWAITGPIO _IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
#endif /* _SYNCLINK_H_ */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
