Re: CDROM support for Promise 20269

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 03 Mar 2006 17:25:54 -0600 Robert Hancock wrote:

> John Treubig wrote:
> > I've been working on a problem with Promise 20269 PATA adapter under 
> > LibATA that if I attach a CDROM drive, I can not see the drive.  The 
> > message log reports that the driver sees the device, but when I'm fully 
> > booted, there's no device available.
> 
> ..
> 
> > [  118.621489] scsi4 : pata_pdc2027x
> > [  118.643926] ata1(1): WARNING: ATAPI is disabled, device ignored.
> 
> Sounds like your problem there.. need to enable ATAPI in your 
> libata/PATA kernel configuration?

Please don't drop cc's etc.  Just use reply-to-all.

For John:  this means that you need to load libata with this option:
atapi_enabled=1
So if you build it into the kernel image, add this to the boot option:
  libata.atapi_enabled=1
or if you load it as a module, just add:  atapi_enabled=1
or you can edit the source file and change the variable to 1,
but that's the least preferable way IMO.

---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux