Hey hackers. ;)
I created this little patch while reading through drivers/block/ub.c. It fixes
some indentation/whitespace as well as some empty commenting, an hardcoded
module name and an unneeded return.
The patch is against the latest -git.
Marc
--- ub.c.orig 2006-02-07 23:35:32.000000000 +0100
+++ ub.c 2006-02-07 23:53:56.000000000 +0100
@@ -33,10 +33,10 @@
#include <linux/timer.h>
#include <scsi/scsi.h>
-#define DRV_NAME "ub"
-#define DEVFS_NAME DRV_NAME
+#define DRV_NAME "ub"
+#define DEVFS_NAME DRV_NAME
-#define UB_MAJOR 180
+#define UB_MAJOR 180
/*
* The command state machine is the key model for understanding of this driver.
@@ -109,19 +109,13 @@
* This many LUNs per USB device.
* Every one of them takes a host, see UB_MAX_HOSTS.
*/
-#define UB_MAX_LUNS 9
+#define UB_MAX_LUNS 9
-/*
- */
-
-#define UB_PARTS_PER_LUN 8
+#define UB_PARTS_PER_LUN 8
-#define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */
+#define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */
-#define UB_SENSE_SIZE 18
-
-/*
- */
+#define UB_SENSE_SIZE 18
/* command block wrapper */
struct bulk_cb_wrap {
@@ -161,28 +155,28 @@
*/
struct ub_dev;
-#define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */
-#define UB_MAX_SECTORS 64
+#define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */
+#define UB_MAX_SECTORS 64
/*
* A second is more than enough for a 32K transfer (UB_MAX_SECTORS)
* even if a webcam hogs the bus, but some devices need time to spin up.
*/
-#define UB_URB_TIMEOUT (HZ*2)
-#define UB_DATA_TIMEOUT (HZ*5) /* ZIP does spin-ups in the data phase */
-#define UB_STAT_TIMEOUT (HZ*5) /* Same spinups and eject for a dataless cmd. */
-#define UB_CTRL_TIMEOUT (HZ/2) /* 500ms ought to be enough to clear a stall */
+#define UB_URB_TIMEOUT (HZ*2)
+#define UB_DATA_TIMEOUT (HZ*5) /* ZIP does spin-ups in the data phase */
+#define UB_STAT_TIMEOUT (HZ*5) /* Same spinups and eject for a dataless cmd. */
+#define UB_CTRL_TIMEOUT (HZ/2) /* 500ms ought to be enough to clear a stall */
/*
* An instance of a SCSI command in transit.
*/
-#define UB_DIR_NONE 0
-#define UB_DIR_READ 1
-#define UB_DIR_ILLEGAL2 2
-#define UB_DIR_WRITE 3
+#define UB_DIR_NONE 0
+#define UB_DIR_READ 1
+#define UB_DIR_ILLEGAL2 2
+#define UB_DIR_WRITE 3
-#define UB_DIR_CHAR(c) (((c)==UB_DIR_WRITE)? 'w': \
- (((c)==UB_DIR_READ)? 'r': 'n'))
+#define UB_DIR_CHAR(c) (((c)==UB_DIR_WRITE)? 'w': \
+ (((c)==UB_DIR_READ)? 'r': 'n'))
enum ub_scsi_cmd_state {
UB_CMDST_INIT, /* Initial state */
@@ -241,8 +235,6 @@
struct scatterlist sgv[UB_MAX_REQ_SG];
};
-/*
- */
struct ub_capacity {
unsigned long nsec; /* Linux size - 512 byte sectors */
unsigned int bsize; /* Linux hardsect_size */
@@ -253,8 +245,8 @@
* The SCSI command tracing structure.
*/
-#define SCMD_ST_HIST_SZ 8
-#define SCMD_TRACE_SZ 63 /* Less than 4KB of 61-byte lines */
+#define SCMD_ST_HIST_SZ 8 /* history size */
+#define SCMD_TRACE_SZ 63 /* Less than 4KB of 61-byte lines */
struct ub_scsi_cmd_trace {
int hcur;
@@ -263,7 +255,7 @@
unsigned char op;
unsigned char dir;
unsigned char key, asc, ascq;
- char st_hst[SCMD_ST_HIST_SZ];
+ char st_hst[SCMD_ST_HIST_SZ];
};
struct ub_scsi_trace {
@@ -313,8 +305,6 @@
return ret;
}
-/*
- */
struct ub_scsi_cmd_queue {
int qlen, qmax;
struct ub_scsi_cmd *head, *tail;
@@ -393,8 +383,6 @@
struct ub_scsi_trace tr;
};
-/*
- */
static void ub_cleanup(struct ub_dev *sc);
static int ub_request_fn_1(struct ub_lun *lun, struct request *rq);
static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
@@ -428,8 +416,6 @@
static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe);
static int ub_probe_lun(struct ub_dev *sc, int lnum);
-/*
- */
#ifdef CONFIG_USB_LIBUSUAL
#define ub_usb_ids storage_usb_ids
@@ -450,10 +436,10 @@
* This has to be thought out in detail before changing.
* If UB_MAX_HOST was 1000, we'd use a bitmap. Or a better data structure.
*/
-#define UB_MAX_HOSTS 26
+#define UB_MAX_HOSTS 26
static char ub_hostv[UB_MAX_HOSTS];
-#define UB_QLOCK_NUM 5
+#define UB_QLOCK_NUM 5
static spinlock_t ub_qlockv[UB_QLOCK_NUM];
static int ub_qlock_next = 0;
@@ -785,12 +771,11 @@
return cmd;
}
-#define ub_cmdq_peek(sc) ((sc)->cmd_queue.head)
+#define ub_cmdq_peek(sc) ((sc)->cmd_queue.head)
/*
* The request function is our main entry point
*/
-
static void ub_request_fn(request_queue_t *q)
{
struct ub_lun *lun = q->queuedata;
@@ -1420,19 +1405,19 @@
}
switch (bcs->Status) {
- case US_BULK_STAT_OK:
- break;
- case US_BULK_STAT_FAIL:
- ub_state_sense(sc, cmd);
- return;
- case US_BULK_STAT_PHASE:
- /* P3 */ printk("%s: status PHASE\n", sc->name);
- goto Bad_End;
- default:
- printk(KERN_INFO "%s: unknown CSW status 0x%x\n",
- sc->name, bcs->Status);
- ub_state_done(sc, cmd, -EINVAL);
- return;
+ case US_BULK_STAT_OK:
+ break;
+ case US_BULK_STAT_FAIL:
+ ub_state_sense(sc, cmd);
+ return;
+ case US_BULK_STAT_PHASE:
+ /* P3 */ printk("%s: status PHASE\n", sc->name);
+ goto Bad_End;
+ default:
+ printk(KERN_INFO "%s: unknown CSW status 0x%x\n",
+ sc->name, bcs->Status);
+ ub_state_done(sc, cmd, -EINVAL);
+ return;
}
/* Not zeroing error to preserve a babble indicator */
@@ -1548,7 +1533,6 @@
*/
static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
-
if (__ub_state_stat(sc, cmd) != 0)
return;
@@ -1660,8 +1644,6 @@
return 0;
}
-/*
- */
static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
{
unsigned char *sense = sc->top_sense;
@@ -1705,10 +1687,8 @@
* XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing.
* XXX Make usb_sync_reset asynchronous.
*/
-
static void ub_reset_enter(struct ub_dev *sc, int try)
{
-
if (sc->reset) {
/* This happens often on multi-LUN devices. */
return;
@@ -1799,7 +1779,6 @@
*/
static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
{
-
lun->readonly = 0; /* XXX Query this from the device */
lun->capacity.nsec = 0;
@@ -1894,8 +1873,6 @@
return rc;
}
-/*
- */
static int ub_bd_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
@@ -1969,7 +1946,6 @@
*/
if (ub_sync_tur(lun->udev, lun) != 0) {
lun->changed = 1;
- return 1;
}
return lun->changed;
@@ -2132,8 +2108,6 @@
return rc;
}
-/*
- */
static void ub_probe_urb_complete(struct urb *urb, struct pt_regs *pt)
{
struct completion *cop = urb->context;
@@ -2686,7 +2660,6 @@
* At this point there must be no commands coming from anyone
* and no URBs left in transit.
*/
-
device_remove_file(&sc->intf->dev, &dev_attr_diag);
usb_set_intfdata(intf, NULL);
// usb_put_intf(sc->intf);
@@ -2698,7 +2671,7 @@
}
static struct usb_driver ub_driver = {
- .name = "ub",
+ .name = DRV_NAME,
.probe = ub_probe,
.disconnect = ub_disconnect,
.id_table = ub_usb_ids,
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
